High temperature tensile and compressive deformation characteristics of magnesia doped alumina

Acta Materialia

Volumn 48, Issue 15, 2000, Pages 3905-3915

  Kottada, R S ^a   Chokshi, A H ^a  

^a INDIAN INSTITUTE OF SCIENCE   (India)

Author keywords

[No Author keywords available]

Indexed keywords

COMPRESSIVE STRENGTH; CREEP; GRAIN GROWTH; HIGH TEMPERATURE PROPERTIES; MAGNESIA; STRAIN; STRAIN HARDENING; SUPERPLASTICITY; TENSILE STRENGTH;

HIGH TEMPERATURE COMPRESSIVE PROPERTIES; HIGH TEMPERATURE TENSILE PROPERTIES;

ALUMINA;

EID: 0034270063     PISSN: 13596454     EISSN: None     Source Type: Journal    
DOI: 10.1016/S1359-6454(00)00180-4     Document Type: Article

References (58)

1. Cannon W.R., Langdon T.G. J. Mater. Sci. 18:1983;1.
2. Cannon W.R., Langdon T.G. J. Mater. Sci. 23:1988;1.
3. Chokshi A.H., Langdon T.G. Mater. Sci. Tech. 7:1991;577.
4. Langdon, T. G. and Wadsworth, J., in Superplasticity in Advanced Materials, eds. Hori, S., Tokizane, M., Furushiro, N., The Japan Society for Research on Superplasticity, Osaka, 1991, p. 847.
5. Chokshi A.H. Mater. Sci. Engng. A116:1993;119.
6. Sakuma T. Mater. Sci. Forum. 243/245:1997;327.
7. Wakai F., Sakaguchi S., Matsuno Y. Adv. Ceram. Mater. 38:1986;259.
8. Kajihara K., Yoshizawa Y., Sakuma T. Scripta Metall. Mater. 28:1993;559.
9. Cannon, R. M. and Coble, R. L., in Deformation of Ceramic Materials, eds. Bradt, R. C., Tressler, R. E., Plenum Press, New York.
10. Cannon R.M., Rhodes W.H., Carter W.R. J. Am. Ceram. Soc. 63:1980;46.
11. Chokshi A.H., Porter J.R. J. Mater. Sci. 21:1986;705.
12. Cannon W.R., Sherby O.D. J. Am. Ceram. Soc. 60:1977;44.
13. Chokshi A.H. J. Mater. Sci. 25:1990;3221.
14. Morrell R., Ashbee K.H.G. J. Mater. Sci. 8:1973;1253.
15. Wang J.-G., Raj R. J. Am. Ceram. Soc. 67:1984;399.
16. Wiederhorn S.M., Roberts D.E., Chuang T.-J., Chuck L. J. Am. Ceram. Soc. 71:1988;602.
17. Krause R.F. J. Am. Ceram. Soc. 75:1992;1307.
18. Davies, C. K. L., Sinha Ray, S. K., ed. Popper, P. Special Ceramics, vol. 5, 1972, p. 193, The British Ceramic Research Association, Stroke-on-Trent, UK.
19. Gruffel P., Carry P., Mocellin A. Rev. Phys. Appl. 23:1988;716.
20. Wakai F., Iga T., Nagano T. Nippon Seramikkusu Gakujutsu Ronbunshi. 96:1988;1206.
21. Robertson A.G., Wilkinson D.S., Cáceres C.H. J. Am. Ceram. Soc. 74:1991;915.
22. Xu A., Solomon A.A. J. Am. Ceram. Soc. 75:1992;985.
23. Yoshizawa Y., Sakuma T. Acta Mater. 40:1992;2943.
24. Wang Z.C., Davies T.J., Ridley N. Scripta Metall. Mater. 28:1993;301.
25. Wang, Z. C., Davies, T. J., Ridley, N., eds Wilshire, B., Evans, R. W. Creep and Fracture of Engineering Materials and Structures, 1993, p. 315, The Institute of Materials, London.
26. Wang, Z. C., Davies, T. J., Ridley, N., eds, Wilshire, B., Evans, R. W., Creep and Fracture of Engineering Materials and Structures, 1993, p. 325, The Institute of Materials, London.
27. French J.D., Zhao J., Harmer M.P., Chan H.M., Miller G.A. J. Am. Ceram. Soc. 77:1994;2857.
28. Yoshizawa Y., Sakuma T. Mater. Sci. Engng. A176:1994;447.
29. Okada K., Sakuma T. J. Am. Ceram. Soc. 79:1996;499.
30. Davies T.J., Ogwu A.A., Ridley N., Wang Z.C. Acta Mater. 44:1996;2373.
31. Wang Z.C., Davies T.J., Ridley N., Ogwu A.A. Acta Mater. 44:1996;4301.
32. Sakuma T., Ikuhara Y., Takigawa Y., Thavorniti P. Mater. Sci. Engng. A234/236:1997;226.
33. Wakai F., Nagano T., Iga T. J. Am. Ceram. Soc. 80:1997;2361.
34. Cho J., Harmer M.P., Chan H.M., Rickman J.M., Thompson A.M. J. Am. Ceram. Soc. 80:1997;1013.
35. Blanchard C.R., Lin H.-T., Becher P.F. J. Am. Ceram. Soc. 81:1998;1429.
36. Li Y.-Z., Wang C., Chan H.M., Rickman J.M., Harmer M.P., Chabala J.M., Gavrilov K.L., Levi-Setti R. J. Am. Ceram. Soc. 82:1999;1497.
37. Rai G., J Grant N. Metall. Trans. 6A:1975;385.
38. Chokshi A.H. Mater. Sci. Tech. 7:1991;469.
39. Satapathy L.N., Kottada R.S., Chokshi A.H. Scripta Mater. 41:1999;1091.
40. Hines J., Ikuhara Y., Chokshi A.H., Sakuma T. Acta Mater. 46:1998;5557.
41. Kottada R.S., Chokshi A.H. Key Engg. Mater. 171/174:2000;779.
42. Wakai, F., Sakaguchi, S., Kanayama, K., Kato, H., Onishi, H., eds, Bunk, W., Hausner, H., Ceramic Materials and Components for Engines, 1986, p. 315, Verlag Deutsche Keramische Gessellschaft, Saarbrucken.
43. Dieter, G., Mechanical Metallurgy, 2nd ed., 1976, McGraw-Hill, New York.
44. Burton B. Diffusion Creep of Polycrystalline Materials. 1977;Trans Tech S.A., Aedermannsdorf, Switzerland.
45. Langdon T.G. Metals Forum. 4:1981;14.
46. Chokshi A.H. Scripta Mater. 42:2000;241.
47. Ashby M.F., Verrall R.A. Acta Metall. 21:1973;149.
48. Gifkins R.C. J. Mater. Sci. 13:1978;1926.
49. Spingarn J.R., Nix W.D. Acta metall. 26:1978;1389.
50. Haneda H., Monty C. J. Am. Ceram. Soc. 72:1989;1153.
51. Prot D., Gall M.L., Lesages B., Huntz A.M., Monty C. Phil. Mag. A73:1996;935.
52. Coble R.L. J. Appl. Phys. 34:1963;1679.
53. Chokshi A.H. J. Am. Ceram. Soc. 71:1988;C-241.
54. Oishi Y., Kingery W.D. J. Chem. Phys. 33:1960;480.
55. Sudhir, B. and Chokshi, A. H., submitted for publication.
56. Chokshi, A. H., eds, Mishra, R. S., Mukherjee, A. K., Murty, K. L., Creep Behavior of Advanced Materials for the 21st Century, 1999, p. 461, The Minerals, Metals and Materials Society, Warrendale, PA, USA.
57. Gordon R.S. J. Am. Ceram. Soc. 56:1973;147.
58. Dominguez-Rodriguez A., Castaing J. Scripta Metall. Mater. 29:1993;1207.