Use of CDM in materials modeling and component creep life prediction

Journal of Pressure Vessel Technology, Transactions of the ASME

Volumn 122, Issue 3, 2000, Pages 281-296

  Dyson, Brian ^a  

^a IMPERIAL COLLEGE LONDON   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

BOUNDARY CONDITIONS; CREEP TESTING; DIFFERENTIAL EQUATIONS; FATIGUE OF MATERIALS; MATHEMATICAL MODELS; METALLOGRAPHIC MICROSTRUCTURE; PRESSURE VESSELS; RESIDUAL STRESSES; SERVICE LIFE; STRAIN RATE; STRESS RELAXATION; WELDS;

CONTINUUM CREEP DAMAGE MECHANICS; ENVIRONMENTALLY INDUCED DAMAGED; STRAIN INDUCED DAMAGE; THERMAL FATIGUE; THERMALLY INDUCED DAMAGE;

CONTINUUM MECHANICS;

EID: 0034249524     PISSN: 00949930     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.556185     Document Type: Article

References (62)

1. Cane, B. J., and Townsend, R. D., 1985, Flow and Fracture at Elevated Temperatures, R. Raj, ed., ASM, OH, pp. 279-316.
2. Evans, R. W., Parker, J. D., and Wilshire, B., 1982. Recent Advances in Creep and Fracture of Engineering Materials and Structures, B. Wilshire and D. R. J. Owen, eds., Pineridge Press, Swansea, UK, pp. 135-84.
3. Evans, R. W., and Wilshire, B., 1996, Structural Materials: Engineering Application Through Scientific Insight, E. D. Hondros and M. McLean, eds., Inst. of Materials, London, UK, pp. 155-72.
4. Prager, M., 1994, ASME Pressure Vessel Piping Conf., 288, pp. 1-20.
5. Robinson, E. L., 1938, Trans. ASME, 60, p. 253.
6. Robinson, E. L., 1953, Trans. AIME, 7a, p. 777.
7. Larson, F. R., and Miller, I., 1952, Trans. ASME, 174, p. 765.
8. Manson, S. S., and Haferd, A. M., 1953, N.A.C.A. Tech. Note 2890.
9. Ashby, M. F., and Dyson, B. F., 1984, Advances in Fracture Research, S. R. Valluri et al., eds., Pergamon Press, Vol. 1, pp. 3-30.
10. Dyson, B. F., 1988, Rev. Phys. Appl., 23, pp. 605-13.
11. Blum, W., 1983, Scr. Metall., 18, pp. 1383-88.
12. Eggeler, G., Nilsvang, N., and Ilschner, B., 1987, Steel Res., 58, pp. 97-103.
13. Blum, W., and Straub, S., 1991, Steel Res., 62, No. 2, pp. 72-74.
14. Straub, S., Polcik, P., and Blum, W., 1994, Strength of Materials, Oikawa et al., eds., Japan Institute of Materials, pp. 623-626.
15. Dyson, B. F., and McLean, M., 1983, Acta Metall., 31, pp. 17-27.
16. Alexander, H., and Haasen, P., 1968, Solid State Phys., 22, pp. 27-158.
17. Gibbons, T. B., and Henderson-Brown, M., 1975, Scr. Metall., 9, pp. 15-16.
18. Barbosa, A., Taylor, N. G., Ashby, M. F., Dyson, B. F., and McLean, M., 1988, Superalloys 1988, Duhl et al., eds., Met. Soc. AIME, p. 683.
19. Ghosh, R., Curtis, R., and McLean, M., 1990, Acta Metall. Mater., 38, pp. 1977-92.
20. Greenwood, G. W., 1956, Acta Metall., 4, pp. 243-48.
21. Wagner, C., 1961, Z. Elektrochem., 65, p. 581.
22. Liftshilz, I. M., and Slyozov, I., 1961, J. Phys. Chem. Solids, 19, p. 35.
23. Dyson, B. F., and Osgerby, S., 1993, NPL Report DMA (AI16).
24. Dyson, B. F., 1999, in Creep Behavior of Advanced Materials for the 21st Century, Mishra, R. S., Mukherjee, A. K., and Murty, K. L., eds., TMS Warrendale, PA, 3-12.
25. Kadoya, Y., Nishimura, N., Dyson, B. F., and McLean, M., 1997, Creep & Fracture of Engineering Materials & Structures, Earthman, J. C., and Mohamed, F. A., eds., TMS, Warrendale, PA, 343-352.
26. Dyson, B. F., and Osgerby, S., 1989, Materials and Engineering Design: The Next Decade, Dyson, B. F., and Hayhurst, D. R., eds., The Inst. of Metals, London, UK, pp. 373-379.
27. Janson, J., and Hult, J., 1977, J. Mécaniq. Appl., 1, pp. 69-84.
28. Saanouni, K., Chaboche, J. L., and Bathias, C., 1986, J. Eng. Frac. Mech., 25, pp. 677-691.
29. Lemaitre, J., and Chaboche, J. L., 1990, Mechanics of Materials, Cambridge University Press, Caubridge, UK.
30. Chaboche, J. L., and Nouailhas, D., 1989, Trans. ASME, 111, pp. 424-430.
31. Kachanov, L. M., 1958, Izv. Akad. Nauk SSSR, Ser. Fiz., (8), pp. 26-31.
32. Rabotnov, Y. N., 1969, Proc. XII IUTAM Congress, Stamford, CN, eds., Hetenyi & Vincenti, Springer, p. 137.
33. Penny, R. K., and Marriott, D. L., 1995, Design for Creep, Chapman & Hall, London, UK.
34. Leckie, F. A., and Hayhurst, D. R., 1974, Proc. R. Soc. London, Ser. A 340, pp. 323-347.
35. Leckie, F. A., and Hayhurst, D. R., 1977, Acta Metall., 25, pp. 1059-1070.
36. Ion, J. C., Barbosa, A., Ashby, M. F., Dyson, B. F., and McLean, M., 1986, NPL Report DMA (A115).
37. McVetty, P. G., 1943, Trans. ASME, 65, pp. 761-769.
38. Dyson, B. F., and Loveday, M. S., 1980, Engineering Aspects of Creep, Mech. I., and London, E., UK, pp. 61-66.
39. Hutchinson, J. W., 1983, Acta Metall., 31, pp. 1079-1088.
40. Wert, C., and Zener, C., 1950, J. Appl. Phys., 21, p. 5.
41. Osgerby, S., Barbosa, A., and Dyson, B. F., 1992, NPL Report DMM (A35).
42. Dyson, B. F., Rogers, M. J., and Loveday, M. S., 1976, Proc. R. Soc. London, Ser. A, 349, pp. 245-259.
43. Tipler, H. R., and Peck, M., 1981, NPL Report DMA (A33).
44. Dyson, B. F., and McLean, M., 1998, in Microstructural Stability of Creep Resistant Alloys for High Temperature Plant, Applications, A. Strang et al., eds., Institute of Materials, London, UK.
45. Quested, P. N., and McLean, M., 1997, NPL, unpublished data.
46. Dyson, B. F., and Gibbons, T. B., 1987, Acta Metall., 31, pp. 17-27.
47. Wilshire, B., and Evans, R. W., 1989, Trans. ASME, 111, p. 217.
48. Henderson, P., and McLean, M., 1984, Creep & Fracture of Engineering Materials & Structures, Wilshire, B., and Owen, D. R. J., eds., Pineridge Press, Swansea, p. 319.
49. Odquist, F. K. G., and Hull, J., 1961, Ark. Fys., 19, pp. 379-382.
50. Cocks, A. C. F., and Ashby, M. F., 1982, Prog. Mater. Sci., 27, p. 189.
51. Hales, R., Osgerby, S., and Dyson, B. F., 1997, Creep and Fracture of Engineering Materials and Structures, Earthman, J. C., and Mohamed, F. A., eds., TMS, Warrendale, PA, pp. 749-758.
52. Chan, U. S., Bodner, S. R., and Lindholm, U. S., 1988, ASME J. Eng. Mater. Technol., 110, pp. 1-8.
53. Merzer, A., and Bodner, S. R., 1979, ASME J. Eng. Mater. Technol., 101, p. 388.
54. Miller, A. K., 1997, Creep and Fracture of Engineering Materials and Structures, Earthman, J. C., and Mohamed, F. A., eds., TMS, Warrendale, PA, pp. 159-170.
55. Miller, A. K., ed., 1987, Unified Constitutive Equations for Creep and Plasticity, Elsevier Applied Science.
56. Chaboche, J. L., and Rousselier, G., 1983, J. Pressure Vessel Technol., 105, pp. 153-159.
57. Robinson, D. N., and Bartolotta, P. A., 1985, NASA Report CR 174836.
58. Gooch, D. J., and Kimmins, S. T., 1987, Creep and Fracture of Engineering Materials and Structures, Wilshire, B., and Evans, R. W., eds., Inst. of Metals, London, UK, pp. 689-703.
59. Cane, B. J., 1979, Metal Sci., 13, pp. 287-294.
60. Evans, R. W., 1989, Materials and Engineering Design: The Next Decade, Dyson, B. F., and Hayhurst, D. R., eds., The Inst. of Metals, London, UK, pp. 185-192.
61. Othman, A. M., Dyson, B. F., Hayhurst, D. R., and Lin, J., 1994, Acta Metall. Mater., 42, pp. 597-611.
62. Monkman, F. C., and Grant, N. J., 1956, Proc. ASTM, 56, p. 593.