Continuum versus discontinuum damage mechanics of creep caused by microcracking

International Journal of Fracture

Volumn 101, Issue 3, 2000, Pages 181-201

  Salganik, Rafael L ^a,b   Gotlib, Victor A ^a,b  

^a HOLON INSTITUTE OF TECHNOLOGY   (Israel)

^b TEL AVIV UNIVERSITY   (Israel)

Author keywords

Brittle materials; Creep; Damage; Fracture kinetics; Microcrack; Thermal activation

Indexed keywords

BRITTLENESS; CONTINUUM MECHANICS; CREEP; MICROCRACKING; STRESS ANALYSIS;

CONTINUUM DAMAGE MECHANICS (CDM); DISCONTINUUM DAMAGE MECHANICS (DDM); FRACTURE KINETICS;

FRACTURE MECHANICS;

BRITTLE FRACTURE; CREEP; DAMAGE; MICROCRACK;

EID: 0034125710     PISSN: 03769429     EISSN: None     Source Type: Journal    
DOI: 10.1023/A:1007677529834     Document Type: Article

References (38)

1. Afonja, A.A. (1980). The effect of temperature and strain rate on the superplastic behaviour of P/M IN-100 superalloy. Journal of Mechanical Working Technology 3, 331-339.
2. Berry, J.P. (1972). Fracture of polymeric glasses. Fracture (Edited by H. Liebowitz), vol. VII, Academic Press, New York, 37-92.
3. Bodner, S.R. and Hashin, Z. (1986). Preface. Engineering Fracture Mechanics 25(5/6), special issue Mechanics of Damage and Fatigue (Edited by S.R. Bodner and Z. Hashin), 503-504.
4. Bodner, S.R. and Hashin, Z. (1986). Preface. Engineering Fracture Mechanics 25(5/6), special issue Mechanics of Damage and Fatigue (Edited by S.R. Bodner and Z. Hashin), 503-504.
5. Brinkman, H.C. (1952). The viscosity of concentrated suspensions and solutions. Journal of Chemical Physics 20, 571.
6. Bruggeman, D.A.G. (1935). Berechnung Vershiedener Physicalisher Konstanten von Heterogenen Substanzen. Annalen der Physic 24, 636-679.
7. Derby, B., Hills, D. A. and Ruiz, C. (1992). Materials for Engineering: A Fundamental Design Approach, Longman with Wiley, New York.
8. Dowling N.E. (1993). Mechanical Behavior of Materials, Prentice-Hall, Englewood Cliffs, New Jersey.
9. Hansen, N.R, and Shreyer, H.L. (1995). Damage deactivation. Transactions of the ASME, Journal of Applied Mechanics 62, 451-458.
10. Hashin, Z. (1986). Analysis of stiffness reduction of cracked cross-ply laminates. Engineering Fracture Mechanics 25(5/6), special issue Mechanics of Damage and Fatigue (Edited by S.R. Bodner and Z. Hashin), 771-778.
11. Hashin, Z. (1986). Analysis of stiffness reduction of cracked cross-ply laminates. Engineering Fracture Mechanics 25(5/6), special issue Mechanics of Damage and Fatigue (Edited by S.R. Bodner and Z. Hashin), 771-778.
12. Hashin, Z. (1988). The differential scheme and its application to cracked materials. Journal of Mechanics and Physics of Solids 36, 719-734.
13. Hellan, K. (1984). Introduction to Fracture Mechanics, McGraw-Hill, New York.
14. Ju, J.W. (1996). On micromechanical evolutionary damage models for polycrystalline ceramics. International Journal of Damage Mechanics 5, 113-137.
15. Kachanov, L.M. (1986). Introduction to Continuum Damage Mechanics, Martinus Nijhoff, Dordrecht.
16. Krajcinovic, D. and Fanella, D. (1986). A micromechanical damage model for concrete. Engineering Fracture Mechanics 25(5/6), special issue Mechanics of Damage and Fatigue (Edited by S.R. Bodner and Z. Hashin), 585-596.
17. Krajcinovic, D. and Fanella, D. (1986). A micromechanical damage model for concrete. Engineering Fracture Mechanics 25(5/6), special issue Mechanics of Damage and Fatigue (Edited by S.R. Bodner and Z. Hashin), 585-596.
18. Kuksenko, V.S. and Slutsker, A.I. (1976). Structural conditions of deformation and fracture of oriented crystalline polymers. Journal of Macromolecular Science. Part B: Physics 12, 487-509.
19. Lemaitre, J. and Chaboche, J.-L. (1990). Mechanics of Solid Materials, Cambridge University Press, Cambridge.
20. Litewka, A. (1986). On stiffness and strength reduction of solids due to crack development. Engineering Fracture Mechanics 25(5/6), special issue Mechanics of Damage and Fatigue (Edited by S.R. Bodner and Z. Hashin), 637-643.
21. Litewka, A. (1986). On stiffness and strength reduction of solids due to crack development. Engineering Fracture Mechanics 25(5/6), special issue Mechanics of Damage and Fatigue (Edited by S.R. Bodner and Z. Hashin), 637-643.
22. Paul, B. (1968). Macroscopic criteria for plastic flow and brittle fracture. Fracture (Edited by H. Liebowitz), vol. II, Academic Press, New York, 313-496.
23. Regel, V.R., Slutsker, A.I. and Tomashevsky, E.E. (1974). Kinetic Nature of Strength of Solids, Nauka, Moscow, (in Russian). See also International Journal of Fracture 11(5), (1975), Zhurkov Anniversary Issue.
24. Regel, V.R., Slutsker, A.I. and Tomashevsky, E.E. (1974). Kinetic Nature of Strength of Solids, Nauka, Moscow, (in Russian). See also International Journal of Fracture 11(5), (1975), Zhurkov Anniversary Issue.
25. Regel, V.R. and Slutsker, A.I. (1997). On the kinetics of mechanical and electrical fracture of solids. Transactions of St. Petersburg Academy of Sciences for Strength Problems 1, 226-232.
26. Roscoe, R. (1952). The viscosity of suspensions of rigid spheres. British Journal of Applied Physics 3, 267-269.
27. Salganik, R.L. (1969). Temperature dependence of the rupture lifetime of solids. Soviet Physics, Doklady 14, 221-223.
28. Salganik, R.L. (1973). Mechanics of bodies with many cracks. Mechanics of Solids 8, 135-143.
29. Salganik, R.L. (1976). The effective transverse conductivity of layer materials with trough cracks in the layers. Inzhenerno-Fizicheskii Zhurnal 30, 868-875, (in Russian). English translation - Journal of Engineering Physics and Thermophysics.
30. Salganik, R.L. (1976). The effective transverse conductivity of layer materials with trough cracks in the layers. Inzhenerno-Fizicheskii Zhurnal 30, 868-875, (in Russian). English translation - Journal of Engineering Physics and Thermophysics.
31. Salganik, R.L. (1982). Overall effects due to cracks and crack-like defects. Defects and Fracture (Edited by G.C. Sih and H. Zorski), Proceedings of First International Symposium on Defects and Fracture, held at Tuczno, Poland, October 13-17, 1980, 199-208.
32. Salganik, R.L., Rapoport, L. and Gotlib, V.A. (1997). Effect of structure on environmentally assisted subcritical crack growth in brittle materials. International Journal of Fracture 87, 21-46.
33. Smith, A.I., Murray, D. and King, R.H. (1970). Creep rupture at strain concentrations limitations of the fracture mechanics approach. Thermoinelasticity (Edited by B.A. Boley), IUTAM Symposium East Kilbride, June 25-28, 1968. Springer-Verlag, Wien, New York, 286-296.
34. Toi, Y. and Kyosue, T. (1995). Damage mechanics models for brittle microcracking solids based on three-dimensional mesoscopic simulations. Engineering Fracture Mechanics 50, 11-27.
35. Vavakin, A.S. and Salganik, R.L. (1975). Effective characteristics of nonhomogeneous media with isolated nonhomogeneties. Mechanics of Solids 10, 58-66.
36. Vavakin, A.S. and Salganik, R.L. (1978). Effective elastic characteristics of bodies with isolated cracks, cavities, and rigid nonhomogeneties. Mechanics of Solids 13, 87-97.
37. Xiaoxue, D., Xiusan, X. and Hongzhi, D. (1995). Nonequilibrium statistical theory of inhomogeneous damage. Engineering Fracture Mechanics 52, 289-293.
38. Zimmerman, R.W. and King, M.S. (1985). Propagation of acoustic waves through cracked rock. 26th Symposium on Rock Mechanics, Rapid City, SD, 26-28 June, 739-745.