Process identification from closed-loop response using optimization methods

Chemical Engineering Research and Design

Volumn 78, Issue 4, 2000, Pages 528-541

  Viswanathan, P K ^a   Rangaiah, G P ^a  

^a NATIONAL UNIVERSITY OF SINGAPORE   (Singapore)

Author keywords

Closed loop process identification; Optimization; Relay response; Second order plus dead time model; Step response

Indexed keywords

CLOSED LOOP CONTROL SYSTEMS; COMPUTER SIMULATION; IDENTIFICATION (CONTROL SYSTEMS); MATHEMATICAL MODELS; OPTIMIZATION; STEP RESPONSE;

SECOND ORDER PLUS DEAD TIME (SOPDT) MODEL; SINGLE-INPUT SINGLE OUTPUT (SISO) PROCESS;

PROCESS CONTROL;

OPTIMIZATION; PROCESS CONTROL;

EID: 0033939781     PISSN: 02638762     EISSN: None     Source Type: Journal    
DOI: 10.1205/026387600527671     Document Type: Article

References (42)

1. Yuwana, M. and Seborg, D. E., 1982, A new method for on-line controller tuning, AIChE J, 28: 434.
2. Jutan, A. and Rodriguez, E. S., 1984, Extension of a new method for on-line controller tuning, Can J Chem Eng, 62: 802.
3. Krishnaswamy, P. R., Mary Chan, B. E. and Rangaiah, G. P., 1987, Closed-loop tuning of process control systems, Chem Eng Sci, 42(9): 2173.
4. Lee, J., 1989, On-line PID controller tuning from a single, closed-loop test, AIChE J, 35:329.
5. Chen, C. L., 1989, A simple method for on-line identification and controller tuning, AIChE J, 35: 2037.
6. Bogere, M. N. and Ozgen, C., 1990, On-line controller tuning of second order dead time processes, Chem Eng Res Des, 67: 555.
7. Lee, J., Cho, W. and Edgar, T. F., 1991, An improved technique for on-line controller tuning from closed-loop tests, AIChE J, 36: 1891.
8. Mamat, R. and Fleming, P. J., 1995, Method for on-line identification of a first order plus dead-time process model, Electronics Letters, 31(15): 1297.
9. Hwang, S. H., 1995, Closed-loop automatic tuning of single-input single-output systems, Ind Eng Chem Res, 34: 2406.
10. Krishnaswamy, P. R. and Rangaiah, G. P., 1996, Closed-loop identification of second order dead time process models, Chem Eng Res Des, 74: 30.
11. Park, H. I., Sung, S. W. and Lee, I, B., 1997, On-line process identification using the Laguerre series for automatic tuning of the proportional-integral-derivative controller, Ind Eng Chem Res, 36(1): 101.
12. Suganda, P., Krishnaswamy, P. R. and Rangaiah, G. P., 1998, On-line process identification from closed-loop tests under PI control, Chem Eng Res Des, 76(A): 451.
13. Huang, C. T., Chou, C. J. and Chen, L. Z., 1997, An automatic PID controller tuning method by frequency response techniques, Can J Chem Eng, 75: 596.
14. Park, J. H., Park, H. I. and Lee, I. B., 1998, Closed-loop on-line process identification using a proportional controller, Chem Eng Sci, 53(9): 1713
15. Astrom, K. J. and Hagglund, T., 1984, Automatic tuning of simple regulators with specifications on phase and amplitude margins, Automatica, 20(5): 645.
16. Luyben, W. L., 1987, Derivation of transfer functions for highly nonlinear distillation columns, Ind Eng Chem Res, 26: 2490.
17. Li, W., Eskinat, E. and Luyben, W. L., 1991, An improved autotune identification method, Ind Eng Chem Res, 30: 1530.
18. Chang, R. C., Shen, S. H. and Yu, C. C., 1992, Derivation of transfer functions from relay feedback systems, Ind Eng Chem Res, 31: 855.
19. Huang, H. P., Chen, C. L., Lai, C. W. and Wang, G. B., 1996, Autotuning of model-based PID controllers, AIChE J, 42(9): 2687.
20. Sung, S. W., Lee, J. and Yi, S. H., 1996, Automatic tuning of PID controller using second order plus time delay model, J Chem Eng Japan, 29(6): 990.
21. Shen, S. H., Wu, J. S. and Yu, C. C., 1996, Autotune identification under load disturbance, Ind Eng Chem Res, 35: 1642.
22. Shen, S. H., Wu, J. S. and Yu, C. C., 1996, Use of biased relay feedback for system identification, AIChE J, 42(4): 1174.
23. Shen, S. H., Yu, H. D. and Yu, C. C., 1996, Use of saturation relay feedback for autotune identification, Chem Eng Sci, 51(8): 1187.
24. Wang, Q. G., Hang, C. C. and Bi, Q., 1997, A frequency domain controller design method, Chem Eng Res Des, 75(A): 64.
25. Wang, Q. G., Hang, C. C. and Zou, B., 1997, Low order modeling from relay feedback, Ind Eng Chem Res, 36: 375.
26. Friman, M. and Walker, K. V., 1997, Two channel relay for autotuning, Ind Eng Chem Res, 36: 2662.
27. Luo, R., Qin, S. J. and Chen, D., 1998, A new approach to closed-loop autotuning for proportional-integral-derivative controllers, Ind Eng Chem Res, 37: 2462.
28. Ralston, P. A. S., Watson, K. R., Patwardhan, A. A. and Deshpande, P. B., 1985, A computer algorithm for optimized control, Ind Eng Chem Process Des Dev, 24(4): 1132.
29. Luyben, W. L. and Luyben, M. L., 1997, Essentials of Process Control, (McGraw-Hill, New York).
30. Status, G. H., Biegler, L. T. and Ydstie, B. E., 1997, Global optimization for identification, IEEE Conf on Decision and Control, 3: 3030.
31. Patwardhan, A. A., Karim, M. N. and Shah, R., 1987, Controller tuning by a least-squares technique, AIChE J, 33(10): 1735.
32. Luus, R. and Jaakola, T. H. I., 1973, Optimization by direct search and systematic reduction of the size of the search region, AIChE J, 19(4): 760.
33. Luus, R., Dittrich, J. and Keil, F. J., 1992, Multiplicity of solutions in the optimization of bifunctional catalyst blend in a tubular reactor, Can J Chem Eng, 70: 780.
34. Luus, R., Hartig, E. and Keil, F. J., 1995, Optimal drug scheduling of cancer chemotherapy by direct search optimization, Huang J Ind Chem, 23: 55.
35. Luus, R., 1998, Determination of the region sizes for LJ optimization procedure, Hung J Ind Chem, 26: 281.
36. Neider, J. A. and Mead, R., 1965, A Simplex method for function minimization, Computer J, 7: 308.
37. Broyden, C. G., 1970, The convergence of a class of double-rank minimization algorithms, J Inst Math Applic, 6: 76.
38. Fletcher, R., 1970, A new approach to variable metric algorithms, Computer J, 13: 317.
39. Goldfarb, D., 1970, A family of variable metric updates derived by variational means, Mathematics of Computing, 24: 23.
40. Shanno, D. F., 1970, Conditioning of quasi-Newton methods for function minimization, Mathematics of Computing, 24: 647.
41. Sung, S. W., Lee, I. B. and Lee, B. K., 1998, On-line process identification and automatic tuning method for PID controllers, Chem Eng Sci, 53(10): 1847.
42. Kwak, J. H., Sung, S. W. and Lee, I. B., 1997, On-line process identification and autotuning for integrating processes, Ind Eng Chem Res, 36: 5329.