Numerical simulation of liquefaction-induced deformations

Journal of Geotechnical and Geoenvironmental Engineering

Volumn 126, Issue 7, 2000, Pages 657-666

  Arulanandan, K ^a   Li, X S ^b   Sivathasan, K ^a  

^a Davis   (United States)

^b HONG KONG UNIVERSITY OF SCIENCE AND TECHNOLOGY   (Hong Kong)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER SIMULATION; DEFORMATION; DYNAMIC RESPONSE; EARTHQUAKE RESISTANCE; FINITE ELEMENT METHOD; NONDESTRUCTIVE EXAMINATION; PLASTICITY; SHEAR WAVES; SOIL LIQUEFACTION; STRAIN; STRESS ANALYSIS;

LIQUEFACTION-INDUCED DEFORMATION;

GEOTECHNICAL ENGINEERING;

DEFORMATION; DYNAMIC RESPONSE; KOBE EARTHQUAKE 1995; LIQUEFACTION; NUMERICAL MODEL; SEISMIC RESPONSE;

HONSHU; JAPAN; PORT ISLAND;

EID: 0033924393     PISSN: 10900241     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)1090-0241(2000)126:7(657)     Document Type: Article

References (28)

1. Archie, G. E. (1942). "The electrical resistivity log as an aid in determining some reservoir characteristics." Trans., Am. Inst. of Mining, Metallurgical and Petroleum Engrs., 146, 54-61.
2. Arulanandan, K. (1995). Lecture on in-situ soil characterization, location of critical void ratio versus mean normal stress by in-situ testing, Kyoto University, Kyoto, Japan.
3. Arulanandan, K., Anandarajah, A., and Meegoda, N. J. (1983). "Soil characterization for nondestructive in-situ testing." Symp. Proc., Interaction of Non-Nuclear Munitions with Struct., U.S. Air Force Academy, Colorado Springs, Colo.
4. Arulanandan, K., and Dafalias, Y. F. (1979). "Significance of formation factor in sand structure characterization." Letters in Application and Engrg. Sci., 17, 109-112.
5. Arulanandan, K., and Kutter, B. L. (1978). "Directional structure index related to sand liquefaction." Proc., Specialty Conf. on Earthquake Engrg. and Soil Dyn., ASCE, New York, 213-229.
6. Arulanandan, K., Li, X. S., Paulino, G. H., and Sivathasan, K. (1996). "Dynamic response of saturated level ground sites using verified numerical procedure and in-situ testing." Proc., National Sci. Foundation and California Transp. Dept. Sponsored Workshop/Conf. on Application of Numer. Procedures in Geotech. Earthquake Engrg., Univ. of California, Davis, Calif.
7. Arulanandan, K., and Muraleetharan, K. K. (1985). "Soil liquefaction -a boundary value problem (a priori prediction of pore pressure generation and dissipation during earthquakes on level ground sites." Tech. Rep., University of California, Davis, Calif.
8. Arulanandan, K., and Muraleetharan, K. K. (1988). "Level ground soil-liquefaction analysis using in-situ properties. I." J. Geotech. Engrg., ASCE, 114(7), 753-770.
9. Arulanandan, K., and Sivathasan, K. (1995). "In-situ prediction of critical void ratio versus mean normal pressure." Tech. Rep., University of California, Davis, Calif.
10. Arulanandan, K., and Sivathasan, K. (1998). "Evaluation of site response and deformation of instrumented bridge sites subjected to large magnitude earthquakes." Preliminary Rep. to Dept. of Transp., University of California, Davis, Calif.
11. Arulanandan, K., Yogachandran, C., and Rashidi, H. (1994). "Dielectric dispersion and formation factor methods of site characterization." Geophys. Characterization of Sites, International Society of Soil Mechanics and Foundations Engineering, Bochum, Germany.
12. Arulmoli, K., Arulanandan, K., and Seed, H. B. (1985). "New method for evaluating liquefaction potential." J. Geotech. Engrg. Div., ASCE, 111(1), 94-114.
13. Bruggeman, D. A. G. (1935). "Berechung Verschiedenez Physikalischer Konstanten Von Heterogenen Substanzen." Ann. Phys. Lpz. 5, Berlin, 24, 636 (in German).
14. Chang, C. S., and Misra, A. (1990). "Packing structure and mechanical properties of granulates." J. Engrg. Mech., ASCE, 116(5), 1077-1093.
15. Dafalias, Y. F., and Arulanandan, K. (1979). "Electrical characterization of transversely isotropic sands." Archives of Mech., Warsaw, Poland, 31(5), 723-739.
16. Ishihara, K., Yasuda, S., and Nagase, H. (1996). "Soil characteristics and ground damage." Soils and Found., 109-118.
17. Li, X. S. (1996). "Reduced-order sand model for ground response analysis." J. Engrg. Mech., ASCE, 122(9), 872-881.
18. Li, X. S. (1997). "Modeling of dilative shear failure." J. Geotech. Engrg., ASCE, 123(7), 609-616.
19. Li, X. S., Dafalias, Y. F., and Wang, Z. L. (1999). "A critical-state hypoplasticity sand model with state dependent dilatancy." Can. Geotech. J., in press.
20. Li, X. S., Wang, Z. L., and Shen, C. K. (1992). SUMDES: a nonlinear procedure for response analysis of horizontal-layered sites subjected to multi-directional earthquake loading, Dept. of Civ. and Envir. Engrg., University of California, Davis, Calif.
21. Manzari, M. T., and Dafalias, Y. F. (1997). "A critical state two-surface plasticity model for sands." Geotechnique, London, 47(2), 255-272.
22. Meegoda, N. J., and Arulanandan, K. (1986). "Electrical method of predicting in situ stress state of normally consolidated clays." Proc., In Situ '86, ASCE, New York, 794-808.
23. Reyes, C., Arulanandan, K., Mahnke, S., Baker, C., and Sivathasan, K. (1996). "Fully coupled effective stress based analysis to investigate the consequences of soil liquefaction at mosher slough for FEMA project." Rep., Kleinfelder and Associates, Stockton, Calif.
24. Sivathasan, K., Paulino, G. H., Li, X. S., and Arulanandan, K. (1998). "Validation of site characterization method for the study of dynamic pore pressure response." Proc., Geotech. Earthquake Engrg. and Soil Dyn. III, ASCE, Reston, Va., 469-481.
25. Toki, K. (1995). Rep., Committee of Earthquake Observation and Research in the Kansai Area, Kansai, Japan.
26. Verdugo, R., and Ishihara, K. (1996). "The steady state of sandy soils." Soils and Found., 36(2), 81-91.
27. Wang, Z. L., Dafalias, Y. F., and Shen, C. K. (1990). "Bounding surface hypoplasticity model for sand." J. Engrg. Mech., ASCE, 116(5), 983-1001.
28. Wyllie, M. R. J., and Gregory, A. R. (1953). "Formation factors of unconsolidated porous media." Influence of particle shape and effect of cementation, petroleum transactions, American Institute of Mining, Metallurgical, and Petroleum Engineers, 198, 103-109.