Mullite/molybdenum composites

Key Engineering Materials

Volumn 175, Issue , 2000, Pages 197-212

  Moya, J S ^a   Bartolome J F ^a   Diaz, M ^a   Requena, J ^a  

^a INSTITUTO DE CIENCIA DE MATERIALES DE MADRID   (Spain)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINUM COMPOUNDS; CRACKS; DENSITY (SPECIFIC GRAVITY); ETHANOL; GRAIN SIZE AND SHAPE; MOLYBDENUM; PLASTICITY; SILICATE MINERALS; SINTERING; SOLID SOLUTIONS;

FUNCTIONALLY GRADED MATERIALS (FGM); MULLITE;

CERMETS;

EID: 0033908278     PISSN: 10139826     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (47)

1. T. W. Clyne and P. J. Withers, "An Introduction to Metal-Matrix Composites", Cambridge University Press, Cambridge, 1993.
2. T. Sekino, and K. Niihara, J. Mater. Sci., 32, (1997) p. 3943.
3. T. Sekino, and Niihara K., Nanostructured materials, 6, (1995) p. 663.
4. P. Hing, Sci. Ceram. 12, (1984) p. 87.
5. A. A. Khan, and J. C. Labbe, J. Mater. Sci., 32, (1997) p. 3829.
6. M. Nawa, T. Sekino, and K. Niihara, J. Mater. Sci., 29, (1994) p. 3185.
7. Y. Waku, M. Suzuki, Y. Oda and Y. Kohtoku, Metall. and Mater. Trans., 27A, (1996) p. 3307.
8. C. O. McHugh, T. J. Whalen, and M. Humenik Jr., J. Am. Ceram. Soc., 49[9], (1966) p. 486.
9. D. T. Rankin, J. J. Stiglich, D. R. Petrak and R. Ruh, J. Am. Ceram. Soc., 54 [6] (1971) p. 277.
10. Y. Naerheim, Powder Metallurgy International, 18 [3], (1986) p. 158.
11. Ch. S. Morgan, A. J. Moorhead and R. J. Lauf, Ceramic Bulletin, 61 [9], (1982) p.974.
12. X. Sun, and J. Yeomans, J. Am. Ceram. Soc., 79 [10], (1996) p. 2705.
13. W. H. Tuan, and R. J. Brook, J. Eur. Ceram. Soc., 10, (1992) p. 95.
14. T. Sekino, T. Nakajima and K. Niihara , Materials Letters, 29, (1996) p. 165.
15. E. Breval, G. Dodds and C. G. Pantano, Mat. Res. Bull., 20, (1985) p. 1191.
16. E. Üstündag, R. Subramanian, R. Dieckmann and S. L. Sass, Acta Metall. Mater., 43, (1995) p. 383.
17. J. -L. Huang, and Li Ch. - H., J. Mater. Res., 9 [12], (1994) p. 3153.
18. M. Stech, and J. Rödel, J. Am. Ceram. Soc., 79 [2], (1996) p. 291.
19. L. S. Sigl, P. A. Mataga, B. J. Dalgleish, R. M McMeeking and A. G. Evans, Acta metall., 36 [4], (1988) p. 945.
20. C. A. Andersson and M. K. Aghajanian, Ceram. Eng. Sci. Proc., 9 [7-8], (1988) p. 621.
21. M. K. Aghajanian, N. H. Macmillan, C. R. Kennedy, S. J. Luszcz and R. Roy, J. Mater. Sci., 24, (1989) p. 658.
22. E. D. Rodeghiero, O. K. Tse, J. Chisaki and E. P. Giannelis, Mater. Sci. Eng. A 195, (1995) p. 151.
23. W. H. Tuan and R. J. Brook, J. Eur. Ceram. Soc., 6, (1990) p. 31.
24. E. Breval, Z. Deng, S. Chiou and C. G. Pantano, J. Mater. Sci., 27, 1464 (1992).
25. W. H. Tuan, H. H. Wu and T. J. Yang, J. Mater. Sci., 30, (1995) p. 855.
26. M. F. Ashby, F. G. Blunt, and M. Bannister, Acta Metall., 37, (1989) p. 1847.
27. J. T. Kristic, Philos. Mag., A, 48 [5] (1983) p. 695.
28. M. Rühle and A. G. Evans, Prog. Mater. Sci., 33, (1989) p. 85.
29. X. Sun, and J. A. Yeomans, J. Am. Ceram. Soc., 79 [2], (1996) p. 562.
30. B. D. Flinn, M. Ruehl and A. G. Evans, Acta Metall., 37, (1989) p. 3001.
31. V. V. Krstic, P. S. Nicholson and R. G. Hoagland, J. Am. Ceram. Soc., 64[9](1981) p. 499.
32. H. Ishibashi, E. Saiz and A. P. Tomsia, Am. Ceram. Soc. Bull., 76 [4], (1997) p. 231.
33. Yu. V. Dzyadikevich, and R. M. Gorbatyuk, Powder Metallurgy and Metal Ceramics, 35 [5-6] (1996) p. 311.
34. P. Miranzo, and J. S. Moya, Ceramics International, 10, (1984) p. 147.
35. A. P. Tomsia, E. Saiz, H, Ishibashi, M. Diaz, J. Requena and J. S. Moya, J. Eur. Ceram. Soc., 18 (1998) p. 1365.
36. R. Moreno, J. S. Moya, and J. Requena, Rheological Parameters of Mullite in Aqueous Suspensions, Ceramics Today-Tomorrow's Ceramics, Ed. P. Vicencini, Elsevier Science Publishers B.V, (1991) p. 1053.
37. A. Müller, J. Meyer, E. Krickemeyer and E. Diemann , Agnew. Chem. Int. Ed. Engl., 35, (1996) p. 1206.
38. J. M. Coddington and M. J. Taylor , J. Chem. Soc. Dalton. Trans., 41 (1990).
39. J. F. Bartolomé, M. Diaz, J. Requena, J. S. Moya and A. P. Tomsia, Acta Mater., in Press.
40. J. Bygdén, Du Sichen, and S. Seetharaman, Metallurgical and Materials Transactions B, 25B, (1994) p. 885.
41. C-D. Qin and Derby B., J. Mater. Res., 7, (1992) p. 1480.
42. A. A. Khan and Labbe J. C., J. Eur. Ceram. Soc., 16, (1996) p. 739.
43. Y. C. Lu and C. R. Clayton, Corrossion Science, 29 [8], (1989) p. 927.
44. M. Ürgen, U. Stolz and R. Kirchhein, Corrossion Science, 30 [4/5], (1990) p. 377.
45. J. -G. Choi, L. T. Thompson, Applied Surface Science, 93, (1996) p. 143.
46. C. S. Smithells, "Metals References Book", Vol. 3 (Butter-worths, London, 1967) p. 917.
47. A. Kumar and B. L. Eyre, Proc. R. Soc. Lond. A. 370, (1980) p. 431.