On the evolution of porosity in spray-deposited tool steels

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 31, Issue 3, 2000, Pages 723-733

  Hu, Haiming ^a   Lee, Zin H ^a   White, Dawn R ^a   Lavernia, Enrique J ^a  

^a UNIVERSITY OF CALIFORNIA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CERAMIC MATERIALS; COPPER; CRACK PROPAGATION; DEPOSITION; HEAT TRANSFER; MORPHOLOGY; POROSITY; RESIDUAL STRESSES;

SPRAY DEPOSITION;

TOOL STEEL;

EID: 0033902362     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-000-0014-5     Document Type: Article

References (43)

1. 1. E.J. Lavernia Y. Wu 1996 Spray Atomization and Deposition John Wiley & Sons New York, NY E.J. Lavernia and Y. Wu: Spray Atomization and Deposition, John Wiley & Sons, New York, NY, 1996.
2. 2. P. Mathur D. Apelian A. Lawley 1989 Acta Metall. 37 429 43 10.1016/0001-6160(89)90227-7 1:CAS:528:DyaL1MXpvFOltQ%3D%3D P. Mathur, D. Apelian, and A. Lawley: Acta Metall., 1989, vol. 37, pp. 429–43.
3. 3. E.J. Lavernia 1989 Int. J. Rapid Solidification 5 47 85 1:CAS:528:DyaK3cXitVaqs70%3D E.J. Lavernia: Int. J. Rapid Solidification, 1989, vol. 5, pp. 47–85.
4. 4. P.S. Grant W.T. Kim B. Cantor 1991 Mater. Sci. Eng. A134 1111 14 1:CAS:528:DyaK3MXitlaqsLs%3D P.S. Grant, W.T. Kim, and B. Cantor: Mater. Sci. Eng., 1991, vol. A134, pp. 1111–14.
5. 5. S. Annavarapu R. Doherty 1993 Int. J. Powder Metall. 29 331 43 1:CAS:528:DyaK2cXhslSitLs%3D S. Annavarapu and R. Doherty: Int. J. Powder Metall., 1993, vol. 29, pp. 331–43.
6. 6. R.H. Bricknell 1986 Metall. Trans. A 17A 583 91 1:CAS:528:DyaL28XhvFSqsL4%3D R.H. Bricknell: Metall. Trans. A, 1986, vol. 17A, pp. 583–91.
7. 7. H.C. Fiedler T.F. Sawyer R.W. Kopp A.G. Leatham 1987 J. Met. 39 8 28 33 1:CAS:528:DyaL2sXlsF2nsb8%3D H.C. Fiedler, T.F. Sawyer, R.W. Kopp, and A.G. Leatham: J. Met., 1987, vol. 39 (8), pp. 28–33.
8. 8. H.C. Fiedler T.F. Sawyer R.W. Kopp 1986 Spray Forming—An Evaluation Using IN718 General Electric Report 86 CRD 113 General Electric Schenectady, New York, NY H.C. Fiedler, T.F. Sawyer, and R.W. Kopp: “Spray Forming—An Evaluation Using IN718,” General Electric Report No. 86 CRD 113, General Electric, Schenectady, New York, NY, 1986.
9. 9. M.G. Benz T.F. Sawyer W.T. Carter R.J. Zabala P.L. Dupree 1994 Powder Metall. 37 213 18 1:CAS:528:DyaK2MXjtlGrsr0%3D M.G. Benz, T.F. Sawyer, W.T. Carter, R.J. Zabala and P.L. Dupree: Powder Metall., 1994, vol. 37, pp. 213–18.
10. 10. H. Liu E.J. Lavernia R.H. Rangel 1994 Acta Metall. Mater. 42 3277 89 10.1016/0956-7151(94)90460-X 1:CAS:528:DyaK2cXlvVCks7g%3D H. Liu, E.J. Lavernia, and R.H. Rangel: Acta Metall. Mater., 1994, vol. 42, pp. 3277–89.
11. 11. H. Liu E.J. Lavernia R.H. Rangel 1994 J. Thermal Spray Technol. 2 369 78 H. Liu, E.J. Lavernia, and R.H. Rangel: J. Thermal Spray Technol., 1994, vol. 2, pp. 369–78.
12. 12. B.P. Bewlay B. Cantor 1991 J. Mater. Res. 6 1433 54 1:CAS:528:DyaK3MXkslKnt7c%3D B.P. Bewlay and B. Cantor: J. Mater. Res., 1991, vol. 6, pp. 1433–54.
13. 13. B.P. Bewlay B. Cantor 1986 P. Lee R. Carbonara Rapidly Solidified Materials ASM INTERNATIONAL Materials Park, OH 15 21 B.P. Bewlay and B. Cantor: in Rapidly Solidified Materials, P. Lee and R. Carbonara, eds., ASM INTERNATIONAL, Materials Park, OH, 1986, pp. 15–21.
14. 14. S. Annavarapu D. Apelian A. Lawley 1988 Metall. Trans. A 19A 3077 86 1:CAS:528:DyaL1MXmtFGquw%3D%3D S. Annavarapu, D. Apelian, and A. Lawley: Metall. Trans. A, 1988, vol. 19A, pp. 3077–86.
15. 15. E.J. Lavernia J. Baram E. Gutierrez 1991 Mater. Sci. Eng. A132 119 33 1:CAS:528:DyaK3MXhvFShtr0%3D E.J. Lavernia, J. Baram, and E. Gutierrez: Mater. Sci. Eng., 1991, vol. A132, pp. 119–33.
16. 16. P.S. Grant B. Cantor 1993 J.J. Moore E.J. Lavernia F.H. Froes Proc. Int. Conf. on Advanced Synthesis of Engineered Structural Materials ASM INTERNATIONAL Materials Park, OH 263 67 P.S. Grant and B. Cantor: Proc. Int. Conf. on Advanced Synthesis of Engineered Structural Materials, J.J. Moore, E.J. Lavernia, and F.H. Froes, eds., ASM INTERNATIONAL, Materials Park, OH, 1993, pp. 263–67.
17. 17. P.S. Grant B. Cantor 1991 Cast Met. 4 140 51 P.S. Grant and B. Cantor: Cast Met., 1991, vol. 4, pp. 140–51.
18. 18. M.G. Chu D.K. Denzer A.K. Chakrabarti F.R. Billman 1988 Mater. Sci. Eng. A98 227 32 M.G. Chu, D.K. Denzer, A.K. Chakrabarti, and F.R. Billman: Mater. Sci. Eng., 1988, vol. A98, pp. 227–32.
19. 19. D.N. Hanlon W.M. Rainforth C.M. Sellars 1998 J. Mater. Sci. 33 3233 44 10.1023/A:1013260608214 1:CAS:528:DyaK1cXls1Onu7k%3D D.N. Hanlon, W.M. Rainforth, and C.M. Sellars: J. Mater. Sci., 1998, vol. 33, pp. 3233–44.
20. 20. A.G. Leatham R.G. Brooks 1984 Modern Development Powder Metall. 15 157 73 1:CAS:528:DyaL2sXmtVegtro%3D A.G. Leatham and R.G. Brooks: Modern Development Powder Metall., 1984, vol. 15, pp. 157–73.
21. 21. Eon-Sik Lee Woo-Jin Park J.Y. Jung S. Ahn 1998 Metall. Mater. Trans. A 29A 1395 1404 1:CAS:528:DyaK1cXjtlOhsrg%3D Eon-Sik Lee, Woo-Jin Park, J.Y. Jung, and S. Ahn: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1395–1404.
22. 22. B.P. Bewlay B. Cantor 1990 Metall. Trans. B 21B 899 912 1:CAS:528:DyaK3cXmtlGlsbw%3D B.P. Bewlay and B. Cantor: Metall. Trans. B, 1990, vol. 21B, pp. 899–912.
23. 23. J.R. Davis 1995 Tool Materials ASM INTERNATIONAL Materials Park, OH 135 135 J.R. Davis: Tool Materials, ASM INTERNATIONAL, Materials Park, OH, 1995, p. 135.
24. 24. F.H. Samuel 1986 Metall. Trans. A 17A 73 91 1:CAS:528:DyaL28XhtFCitbo%3D F.H. Samuel: Metall. Trans. A, 1986, vol. 17A, pp. 73–91.
25. 25. E.J. Lavernia J.D. Ayers T.S. Srivatsan 1992 Int. Mater. Rev. 37 1 44 1:CAS:528:DyaK3sXhvFGqtL8%3D E.J. Lavernia, J.D. Ayers, and T.S. Srivatsan: Int. Mater. Rev., 1992, vol. 37, pp. 1–44.
26. 26. W.D. Cai D. Bailey A. Sickinger E.J. Lavernia 1994 J. Thermal Spray Technol. 3 135 41 1:CAS:528:DyaK2MXkt1emtL8%3D W.D. Cai, D. Bailey, A. Sickinger, and E.J. Lavernia: J. Thermal Spray Technol., 1994, vol. 3, pp. 135–41.
27. 27. V.G. McDonell E.J. Lavernia G.S. Samuelsen 1989 E.J. Lavernia H. Henein I. Anderson Synthesis and Analysis in Materials Processing: Advances in Characterization and Diagnosis of Ceramic and Metal Particulate Processing TMS Warrendale, PA 13 37 V.G. McDonell, E.J. Lavernia, and G.S. Samuelsen: in Synthesis and Analysis in Materials Processing: Advances in Characterization and Diagnosis of Ceramic and Metal Particulate Processing, E.J. Lavernia, H. Henein, and I. Anderson, eds., TMS, Warrendale, PA, 1989, pp. 13–37.
28. 28. X. Liang J.C. Earthman E.J. Lavernia 1992 Acta Metall. Mater. 40 3003 16 10.1016/0956-7151(92)90464-P 1:CAS:528:DyaK38XmtFOkt7w%3D X. Liang, J.C. Earthman, and E.J. Lavernia: Acta Metall. Mater., 1992, vol. 40, pp. 3003–16.
29. 29. H. Liu E.J. Lavernia R.H. Rangel 1995 Acta Metall. Mater. 43 2053 72 10.1016/0956-7151(94)00386-V 1:CAS:528:DyaK2MXltFWqsLo%3D H. Liu, E.J. Lavernia, and R.H. Rangel: Acta Metall. Mater., 1995, vol. 43, pp. 2053–72.
30. 30. E.A. Brandes G.B. Brook 1992 Smithells Metals Reference Book Butterworth-Heinemann Ltd. London 12-13 12-14 Smithells Metals Reference Book, E.A. Brandes and G.B. Brook, eds., Butterworth-Heinemann Ltd., London, 1992, pp. 12-13–12-14.
31. 31. M.G. Chu 1994 D. Bloor R.J. Brook M.C. Flemings S. Mahajan Spray Forming, The Encyclopedia of Advanced Materials Pergamon Press Elmsford, NY 2624 28 M.G. Chu: in Spray Forming, The Encyclopedia of Advanced Materials, D. Bloor, R.J. Brook, M.C. Flemings, and S. Mahajan, eds., Pergamon Press, Elmsford, NY, 1994, pp. 2624–28.
32. 32. M.G. Chu S. John Pien 1997 H.Y. Sohn Spray Forming Using a Linear Nozzle: Microstructure Analysis and Deposit Thermal Modeling, Proc. Julian Szekely Memorial Symp. on Materials Processing TMS Warrendale, PA 423 38 M.G. Chu and S. John Pien: Spray Forming Using a Linear Nozzle: Microstructure Analysis and Deposit Thermal Modeling, Proc. Julian Szekely Memorial Symp. on Materials Processing, H.Y. Sohn, ed., TMS, Warrendale, PA, 1997, pp. 423–38.
33. 33. P. Mathur S. Annavarapu D. Apelian A. Lawley 1991 Mater. Sci. Eng. A142 261 76 1:CAS:528:DyaK3MXls1Cis7k%3D P. Mathur, S. Annavarapu, D. Apelian, and A. Lawley: Mater. Sci. Eng., 1991, vol. A142, pp. 261–76.
34. 34. Q. Xu V. Gupta E.J. Lavernia 1999 Metall. Mater. Trans. B 30B 527 39 1:CAS:528:DyaK1MXjvFGmt7s%3D Q. Xu, V. Gupta, and E.J. Lavernia: Metall. Mater. Trans. B, 1999, vol. 30B, pp. 527–39.
35. 35. C.G. Levi 1988 Metall. Trans. A 19A 699 708 1:CAS:528:DyaL1cXhsFCksr0%3D C.G. Levi: Metall. Trans. A, 1988, vol. 19A, pp. 699–708.
36. 36. J.L. Estrada J. Duszczyk 1990 J. Mater. Sci. 25 1381 91 1:CAS:528:DyaK3cXitVaqsLs%3D J.L. Estrada and J. Duszczyk: J. Mater. Sci., 1990, vol. 25, pp. 1381–91.
37. 37. H. Lubanska 1970 J. Met. 22 2 45 49 1:CAS:528:DyaE3cXhtlClsLg%3D H. Lubanska: J. Met., 1970, vol. 22 (2), pp. 45–49.
38. 38. W.D. Cai E.J. Lavernia 1997 Mater. Sci. Eng. A226 8 12 W.D. Cai and E.J. Lavernia: Mater. Sci. Eng., 1997, vol. A226, pp. 8–12.
39. 39. Z.H. Lee H.M. Hu D.R. White E.J. Lavernia 1999 Metall. Mater. Trans. A 30A 1679 82 1:CAS:528:DyaK1MXktFWqtr0%3D Z.H. Lee, H.M. Hu, D.R. White, and E.J. Lavernia: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1679–82.
40. 40. D.M. Knowles J.E. King 1991 Mater. Sci. Technol. 7 1015 20 1:CAS:528:DyaK38XmsVyqsw%3D%3D D.M. Knowles and J.E. King: Mater. Sci. Technol., 1991, vol. 7, pp. 1015–20.
41. 41. S. Ho E.J. Lavernia 1996 Metall. Mater. Trans. A 27A 3241 49 1:CAS:528:DyaK28Xmt1Wmu74%3D S. Ho and E.J. Lavernia: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3241–49.
42. 42. S. Ho E.J. Lavernia 1997 Scripta Mater. 36 283 90 10.1016/S1359-6462(96)00389-2 1:CAS:528:DyaK2sXotFaqsg%3D%3D S. Ho and E.J. Lavernia: Scripta Mater., 1997, vol. 36, pp. 283–90.
43. 43. S. Ho E.J. Lavernia 1996 Scripta Mater. 34 1911 18 10.1016/1359-6462(96)00080-2 1:CAS:528:DyaK28XjtlOrsLY%3D S. Ho and E.J. Lavernia: Scripta Mater., 1996, vol. 34, pp. 1911–18.