Effect of different coatings on thermal fatigue behaviour of AISI H11 hot work tool steel

International Journal of Materials and Product Technology

Volumn 15, Issue 1, 2000, Pages 49-62

  Faccoli, M ^a   La Vecchia, G M ^a   Roberti, R ^a   Molinari, A ^b   Pellizzari, M ^b  

^a UNIVERSITY OF BRESCIA   (Italy)

^b UNIVERSITY OF TRENTO   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

COMPOSITION; CRACK PROPAGATION; FATIGUE OF MATERIALS; MAGNETITE; MICROHARDNESS; MORPHOLOGY; NUCLEATION; OXIDATION; SURFACES; TITANIUM NITRIDE; TOOL STEEL; VAPOR DEPOSITION;

HOT WORK TOOL STEEL; PHYSICAL VAPOR DEPOSITION; SURFACE OXIDATION; THERMAL FATIGUE CYCLING;

PROTECTIVE COATINGS;

EID: 0033901413     PISSN: 02681900     EISSN: None     Source Type: Journal    
DOI: 10.1504/ijmpt.2000.001235     Document Type: Article

References (25)

1. Subramanian, C., Stafford, K.N., Wilks T.P. and Ward, L.P. (1996) "On the design of coating systems: metallurgical and other consideration", J. Materials Proc. Technol., Vol. 56. pp. 385-397.
2. Sundgren, J.E. and Hentzell. H.T. (1986) "A review of present state of art in hard coating grown from the vapor phase". J. Vac. Sci. Technol., A4. pp. 2259-2265.
3. Hans, K. et al. (1989), Wear and corrosion resistance coatings, Expert Verlag, Berlin, pp. 80-123.
4. Pawlowski, L. (1995) The science and engineering of thermal spray coatings, John Wiley & Sons.
5. 2-NiCr and TiC-Ni-based hardmetal like coatings". Thermal Spray: practical solutions for engineering problems Proc., Berndt, C.C. (ed.), Published by ASM Int., Materials Park. Ohio-USA.
6. ASM Speciality Handbook (1995) Tool materials, Davis, J.R. (ed.), ASM International, Materials Park, O.H., USA.
7. Blazynki, T.Z. (1986) Design of tool for deformation processes, Elsevier Applied Science Publishers LDT.
8. De Rossi, S. and Luridiana, S. (1998) 'Characterization of 10 μm thick TiN and CrN coatings for severe application', 11th Congress of the International Federation for Heat Treatment and Surface Engineering Proc., Florence, 19/21 October 1998, Vol. I, pp. 39-45.
9. Molinari, A., Straffelini, G., Roberti, R. and Pirovano, M. (1998) 'Microstructure and technological properties of AISI H11 hot work tool steel', 11th Congress of the International Federation for Heat Treatment and Surface Engineering Proc., Florence, 19/21 October 1998, Vol. II, pp. 151-160.
10. Rechberger, J., Brunner, P. and Dubach, R. (1993) 'High performance cutting tools with a solid lubricant physically vapour-deposited coating', Surface and Coating Techn., Vol. 62, pp. 393-398.
11. Klocke, F. and Eisenblätter. G. (1997) 'Dry cutting', Annals of the CIRP, Vol. 46, No. 2, pp. 519-526.
12. Fox-Rabinovich, G.S., Kovalev, A.I. and Afanasyev, S.N. (1996) 'Characteristic features of wear in tools made of high-speed steels with surface engineered coatings', Wear, Vol. 201, pp. 38-44.
13. Su, Y.L. and Kao, W.H. (1998) 'Optimum multilayer TiN-TiCN coatings for wear resistance and actual application', Wear, Vol. 223, pp. 119-130.
14. Norström, L.A., Johansonn, B. and Klarenfjord, B. (1993) 'Thermal fatigue and thermal shock behavior of some hot-work-tool steels', Tools for die casting, Uddeholm, pp. 177-202.
15. Faccoli, M., La Vecchia, G.M., Roberti, R. and Straffelini, G. (1988) 'Thermal fatigue behaviour and fracture toughness of a Vacuum treated H11 steel', 11th Congress of the International Federation for Heat Treatment and Surface Engineering Proc., Florence, 19/21 October 1998, Vol. III, pp. 437-448.
16. Guobin, Li, Xiangzhi, Li and Jianjun,Wu (1998) 'Study on the thermal fatigue crack initial life of H13 and H21 steels', Materials Processing Techn., Vol. 74, pp. 23-26.
17. Faccoli, M., La Vecchia, G.M., Roberti, R. and Straffelini, G. (1998), 'Resistenza a fatica termica e tenacità alla frattura di un acciaio AISI H11 per stampi da pressofusione temprato in vuoto', Brescia Ricerche, IX. No. 23, pp. 10-17 (in Italian).
18. Faccoli, M., La Vecchia, G.M., Roberti, R. and Molinari, A. (1998) 'Danneggiamento da fatica termica dell'acciaio H11 per stampi da pressofusione con differenti tipi di rivestimento', 27° Convegno Nazionale AIM Progettiamo il futuro Proc., Orvieto, 16/18 Settembre 1998, Vol. 2, pp. 428-434 (in Italian).
19. TM (1996) Technical note, Metal. It. No. 10, pp. 627-629 (in Italian).
20. Rickerby, D.S., Jones, A.M. and Perry, A.J. (1988) 'Structure of titanium nitride coatings deposited by physical vapour deposition: a unified structure model', Surface and Coating Techn., Vol. 36, pp. 631-646.
21. Rudigier, H., Bergmann, E. and Vogel, J. (1988) 'Properties of ion-plated TiN coatings grown at low temperatures', Surface and Coating Techn., Vol. 36, pp. 675-682.
22. Jindal, P.C. and Quinto, D.T. (1988) 'Load dependence of microhardness of hard coatings', Surface and Coating Techn., Vol. 36, pp. 683-694.
23. Molinari, A., Pellizzari, M., Straffelini, G. and Pirovano, M. 'Corrosion behaviour of a surface treated AISI H11 hot work tool steel in molten aluminum alloy', submitted to Surface and Coatings Technology.
24. Roberti, R., La Vecchia, G.M. and Colombo, G. (1992) 'A fracture mechanics approach to toughness characterisation of nitrided layers', Materials Science Forum, Vols. 102-104, pp. 27-278.
25. Molinari, A., Straffelini, G., Pellizzari, M. and Pirovano, M. (1998) 'Wear behaviour of the diffusion layer and of the compound layer of nitrided steels', Surface Engineering, Vol. 14, No. 6, pp. 489-495.