Development and application of a crack tip opening displacement-based mixed mode fracture criterion

International Journal of Solids and Structures

Volumn 37, Issue 26, 2000, Pages 3591-3618

  Sutton, Michael A ^a   Deng, Xiaomin ^a   Ma, Fashang ^a   Newman Jr , James C ^b   James, Mark ^c  

^a University of South Carolina   (United States)

^b NASA LANGLEY RESEARCH CENTER   (United States)

^c Sunflower Networking Group   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER SIMULATION; CRACK INITIATION; CRACK PROPAGATION; FINITE ELEMENT METHOD; MODAL ANALYSIS;

CRACK-TIP OPENING DISPLACEMENT (CTOD); LOAD-CRACK EXTENSION; MIXED MODE FRACTURE CRITERIA;

FRACTURE MECHANICS;

EID: 0033895103     PISSN: 00207683     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0020-7683(99)00055-4     Document Type: Article

References (49)

1. Amstutz, B.E., Sutton, M.A., Dawicke, D.S., Newman Jr., J.C., 1995a. An experimental study of CTOD for mode I/II stable crack growth in thin 2024-T3 aluminum specimens. Fracture Mechanics ASTM STP 1256, 256-271.
2. Amstutz, B.E., Sutton, M.A., Dawicke, D.S., Boone, M.L., 1995b. Effects of mixed mode I/II loading and grain orientation on crack initiation and stable tearing in 2024-T3 aluminum. Fatigue and Fracture ASTM STP 1296, 105-125.
3. Arcan, M., Hashin, Z., Voloshin, A., 1978. A methods to produce uniform plane stress state with applications to fiber-reinforced materials. Experimental Mechanics 18, 141-146.
4. Begley, J.A., Landes, J.D., 1972. The J-integral as a fracture criterion. Fracture Toughness, Part II ASTM STP 560, 170-186.
5. Bruck, H.A., McNeill, S.R., Sutton, M.A., Peters, W.H., 1989. Determination of surface deformations using digital image correlation with the Nnewton Raphson method for partial differential corrections. Experimental Mechanics 29, 261-267.
6. Chao, Y.J., Sutton, M.A., 1994. On the fracture of solids characterized by one or two parameters: theory and practice. Journal of the Mechanics and Physics of Solids 42, 629-647.
7. IC determination. Mechanics of Crack Growth ASTM STP 590, 27-42.
8. Cotterell, B., Rice, J.R., 1980. Slightly curved or kinked cracks. International Journal of Fracture 16, 155-169.
9. Dawicke, D.S., Sutton, M.A., 1994. CTOA and crack-tunneling measurements in thin 2024-T3 aluminum alloy. Experimental Mechanics 34, 357-368.
10. Dawicke, D.S., Sutton, M.A., Newman Jr., J.C., Bigelow, C.A., 1995. Measurement and analysis of critical CTOA for aluminum alloy sheet. Fracture Mechanics ASTM STP 1220, 358-379.
11. Deng, X., Newman, J.C.Jr., 1997a. Implementation and application of a large-rotation finite element formulation in NASA code ZIP2DL. In: FAA-NASA Symposium on Continued Airworthiness of Aircraft Structures, Atlanta, Georgia, August 28-30 1996, vol. II, pp. 377-390 DOT/FAA/AR-97/2.
12. Deng, X., Newman, J.C.Jr., 1997b. ZIP2DL - An Elastic-Plastic, Large-Rotation Finite-Element Stress Analysis and Crack-Growth Simulation Program. NASA Langley Research Center (NASA Technical Memorandum 110332).
13. Erdogan, F., Sih, G.C., 1963. On the crack extension in plates under plane loading and transverse shear, Transactions of the ASME. Journal of Basic Engineering 85, 519-527.
14. Hallback, N., Nilsson, F., 1994. Mixed mode I/II fracture behavior of an aluminum alloy. Journal of the Mechanics and Physics of Solids 42, 1345-1374.
15. Han, G., Sutton, M.A., Chao, Y.J., 1994. A study of stationary crack tip deformation fields in thin sheets by computer vision. Experimental Mechanics 34, 125-141.
16. Han, G., Sutton, M.A., Chao, Y.J., 1995. A study of stable crack growth in thin SEC specimens of 304 stainless steel. Engineering Fracture Mechanics 52, 525-555.
17. Hancock, J.W., Reuter, W.G., Parks, D.M., 1993. Constraint and toughness parameterized by T. Constraint Effects in Fracture ASTM STP 1171, 41-63.
18. Hutchinson, J.W., Paris, P.C., 1979. Stability analysis of J-controlled crack growth. Elastic-plastic fracture ASTM STP 668, 37-64.
19. James, M.A., Swenson, D. 1998. A software framework for two-dimensional mixed mode I/II elastic-plastic fracture. In: Miller (Ed.), Mixed Mode Crack Behavior ASTM STP 1359, (in press).
20. Kanninen, M.F., Rybicki, E.F., Stonesifer, R.B., Broek, D., Rosenfiels, A.R., Marschall, C.W., Hahn, G.T., 1979. Elastic-Plastic fracture mechanics for two-dimensional stable crack growth and instability problems. Elastic-plastic fracture ASTM STP 668, 121-150.
21. Larsson, S.G., Carlsson, A.J., 1973. Influence of non-singular stress terms and specimen geometry on small-scale yielding at crack tip in elastic-plastic materials. Journal of the Mechanics and Physics of Solids 21, 263-278.
22. Lee, K., Lee, J.D., Liebowitz, H., 1997. Finite element analysis of the slow crack growth process in mixed mode fracture. Engineering Fracture Mechanics 4, 551-577.
23. Lloyd, W.R., Piascik, R.S., 1995. Three-dimensional crack growth assessment by microtopographic examination. Fracture Mechanics: ASTM STP 1256 26, 303-318.
24. Ma, F., Deng, X., Sutton, M.A., Newman Jr, J.C. 1999. A CTOD based mixed mode fracture criterion. In: Mixed Mode Crack Behavior, pp. 86-110.
25. Maccagno, T.M., Knott, J.F., 1991. The low temperature brittle fracture behavior of steel in mixed modes I and II. Engineering Fracture Mechanics 38, 111-128.
26. Maccagno, T.M., Knott, J.F., 1992. The mixed mode I/II fracture behavior of lightly tempered HY130 steel at room temperature. Engineering Fracture Mechanics 41, 805-820.
27. Newman Jr., J.C., 1977. Finite element analysis of crack growth under monotonic and cyclic loading. ASTM STP 637, 56-80.
28. Newman Jr., J.C., 1984. An elastic-plastic finite element analysis of crack initiation, stable crack growth, and instability. Fracture Mechanics STP 833, 93-117.
29. Newman, J.C.Jr., Dawicke, D.S., Bigelow, C.A., 1992. Finite Element Analyses and Fracture Simulation in Thin Sheet Aluminum Alloy NASA TM-107662.
30. Nuismer, R.J., 1975. An energy release rate criterion for mixed mode fracture. International Journal of Fracture 11, 245-250.
31. Palaniswamy, K., Knauss, W.G., 1978. On the problem of crack extension in brittle solids under general loading. In: Nemat-Nasser, S. (Ed.), Mechanics Today, vol. 4. Pergamon Press, pp. 87-148.
32. Paris, P.C., Taha, H., Zahoor, A., Ernst .19, H., 1979. The theory of instability of the tearing mode of elastic-plastic crack growth. Elastic-plastic fracture ASTM STP 668, 5-36.
33. Pawliska, P., Richard, R.H., Kiekmann, P., 1993. The behavior of cracks in elastic-plastic materials under plane normal and shear loadings. International Journal of Fracture 62, 43-54.
34. Pettit, R., 1998. Private Communication with M.A. Sutton.
35. Rice, J.R., 1974. Limitations to the small scale yielding approximation for crack tip plasticity. Journal of the Mechanics and Physics of Solids 22, 17-26.
36. Rice, J.R., Sorensen, E.P., 1978. Continuing crack tip deformation and fracture for plane strain crack growth in elastic-plastic solids. Journal of the Mechanics and Physics of Solids 26, 163-186.
37. Roose, E., Eisele, U., Silcher, H., 1993. Effect of stress state on the ductile fracture behavior of large-scale specimens. Constraint Effects in Fracture ASTM STP 1171, 41-63.
38. Shih, C.F., deLorenzi, H.G., Andrews, W.R., 1979. Studies on crack initiation and stable crack growth. Elastic-Plastic Fracture ASTM STP 668, 65-120.
39. Shih, C.F., 1981. Relationship between the J-integral and the crack opening displacement for stationary and extending cracks. Journal of the Mechanics and Physics of Solids 29, 305-326.
40. Sih, G.C., 1974. Strain energy-density factor applied to mixed mode crack problem. International Journal of Fracture 10, 305-321.
41. Sih, G.C., Liebowitz, H., 1968. Mathematical theories of brittle fracture. In: Liebowtz, H. (Ed.), Fracture, An Advanced Treatise, vol. 2. Academic Press, pp. 67-190.
42. Sumi, Y., Nemat-Nasser, Y., Keer, L.M., 1985. On crack path stability in a finite body. Engineering Fracture Mechanics 22, 759-771.
43. Sutton, M.A., McNeill, S.R., Jang, J., Babai, M., 1988. The effects of subpixel image restoration on digital correlation error estimates. Optical Engineering 27, 173-185.
44. Sutton, M.A., Zhao, W., Boone, M.L., Reynolds, A.P., Dawicke, D.S., 1997a. Prediction of crack growth for mode I/II loading using small-scale yielding and void initiation/growth concepts. International Journal of Fracture 83, 275-290.
45. Sutton, M.A., Zhao, W., Deng, X., Dawicke, D.S., Newman, J.C.Jr., 1997b. Numerical Investigations Into the Viability of CTOD as a Fracture Parameter for Mixed-Mode I/II Tearing of Thin Aluminum Sheets. In: Proceedings of the FAA-NASA Symposium on Continued Airworthiness of Aircraft Structures, Atlanta, Georgia, August 28-30 1996, vol. II, pp. 461-472 DOT/FAA/AR-97/2.
46. Swenson, D., James, M., 1997. FRANC2D/L: A Crack Propagation Simulator for Plane Layered Structures, User's Guide, Version 1.4.
47. Tracey, D.M., 1976. Finite element solutions for crack tip behavior in small scale yielding. ASME Journal of Engineering Materials and Technology 98, 146-151.
48. Well, A.A., 1961. Unstable crack propagation in metals: cleavage and fast fracture. Proceedings of the Cranfield Crack Propagation Symposium 1, 210-230.
49. Yang, S., Chao, Y.J., Sutton, M.A., 1993. Higher order asymptotic crack tip fields in a power law hardening material. Engineering Fracture Mechanics 45, 1-20.