Continuity conditions at bending and shearing interfaces of rigid, perfectly plastic structural elements

International Journal of Solids and Structures

Volumn 37, Issue 27, 2000, Pages 3651-3665

  Li, Q M ^a,b  

^a UNIVERSITY OF LIVERPOOL   (United Kingdom)

^b NANYANG TECHNOLOGICAL UNIVERSITY   (Singapore)

Author keywords

[No Author keywords available]

Indexed keywords

BEAMS AND GIRDERS; BENDING (DEFORMATION); DYNAMIC RESPONSE; INTERFACES (MATERIALS); PLASTIC DEFORMATION; SHEAR DEFORMATION; STRESS ANALYSIS;

DISCONTINUITY INTERFACES; SHEARING INTERFACES;

STRUCTURAL ANALYSIS;

EID: 0033884594     PISSN: 00207683     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0020-7683(98)00310-2     Document Type: Article

References (43)

1. Corran, R.S.J., Shadbolt, P.J., Ruiz, C., 1983. Impact loading of plates - an experimental investigation. Int. J. Impact Engng 1, 3-22.
2. de Oliveira, J.G., Jones, N., 1978. Some remarks on the influence of transverse shear on the plastic yielding of structures. Int. J. Mech. Sci. 20, 759-765.
3. Drucker, D.C. 1951. A more fundamental approach to plastic stress-strain relations. In: Sternberg, E. (Ed.), Proceedings of First U.S. Congress of Applied Mechanics. ASME, New York, pp. 487-491.
4. Drucker, D.C., 1964. On the postulate of stability of material in the mechanics of continua. J. de Mecanique 3, 235.
5. Drugan, W.J., Shen, Y., 1987. Restrictions on dynamically propagating surfaces of strong discontinuity in elastic-plastic solids. J. Mech. Phys. Solids 35, 771-787.
6. Duffy, T.A. 1989. Dynamic rupture of shells. In: Wierzbicki, T., Jones, N. (Eds.), Structural Failure. John Wiley and Sons, New York, pp. 161-192.
7. Florence, A.L., First, R.D., 1965. Rigid-plastic beams under uniformly distributed impulses. ASME, J. Appl. Mech. 32, 481-488.
8. Hodge Jr., P.G., 1955. Impact pressure loading of rigid-plastic cylindrical shells. J. Mech. Phys. of Solids 3, 176-188.
9. Hopkins, H.G., Prager, W., 1954. On the dynamics of plastic circular plates. ZAMP 5, 317-330.
10. Jones, N., 1989. Recent studies on the dynamic plastic response of structures. Appl. Mech. Rev. 42, 95-115.
11. Jones, N., 1997. Structural Impact. Cambridge University Press, Cambridge.
12. Jones, N., de Oliveira, J.G., 1979. The influence of rotatory inertia and transverse shear on the dynamic plastic behaviour of beams. ASME, J. Appl. Mech. 46, 303-310.
13. Jones, N., de Oliveira, J.G., 1980. Dynamic plastic response of circular plates with transverse shear and rotaory inertia. ASME, J. Appl. Mech. 47, 27-34.
14. Jones, N., de Oliveira, J.G., 1983. Impulsive loading of a cylindrical shell with transverse shear and rotatory inertia. Int. J. Solids Struct. 19, 263-279.
15. Jones, N., Kims, S.B., Li, Q.M., 1997. Response and failure of ductile circular plates struck by a mass. ASME, J. of Pressure Vessel Tech. 119, 332-342.
16. Koiter, W.T., 1953. Stress-strain relations, uniqueness and variational theorems for elastic-plastic materials with a singular yield surface. Quart. Appl. Math. 11, 350-354.
17. Lee, E.H., Symonds, P.S., 1952. Large plastic deformation of beams under transverse impact. ASME J. Appl. Mech. 19, 308-314.
18. Li, Q.M., Jones, N., 1994. Blast loading of fully clamped circular plates with transverse shear effects. Int. J. Solids Struct. 31, 1861-1876.
19. Li, Q.M., Jones, N., 1995a. Blast loading of fully clamped beams with transverse shear effects. Mechanics of Structures and Machines 23, 59-86.
20. Li, Q.M., Jones, N., 1995b. Blast loading of a "short" cylindrical shell with transverse shear effects. Int. J. Impact Engng 16, 331-353.
21. Li, Q.M., Jones, N., 1998a. Formation of a shear localization in structural elements under transverse dynamic loads. Impact Research Centre Report, No. IRC/170/98, Department of Engineering, University of Liverpool.
22. Li, Q.M., Jones, N., 1998b. Shear failure in an impulsively loaded fully clamped beam. Impact Research Centre Report, No. IRC/ 171/98, Department of Engineering, University of Liverpool.
23. Liu, D., Stronge, W.J., 1995. Perforation of rigid-plastic plate by blunt missile. Int. J. Impact Engng 16 (5/6), 739-758.
24. Menkes, S.B., Opat, H.J., 1973. Broken beams. Exp. Mech. 13, 480-486.
25. Nemat-Nasser, S., Gao, Y.C., 1988. Discontinuities in elastic-plastic solids. Mechanics of Material 7, 215-229.
26. Nonaka, T., 1967. Some interaction effects in a problem of plastic beam dynamics, Part 1-3. ASME, J. Appl. Mech. 34, 623-643.
27. Nonaka, T., 1977. Shear and bending response of a rigid-plastic beam to blast-type loading. Ingenieur-Archiv 46, 35-52.
28. Nowacki, W.K., 1978. Stress Waves in Non-elastic Solids. Pergamon Press.
29. Reid, S.R., Gui, X.G., 1987. On the elastic-plastic deformation of cantilever beams subjected to tip impact. Int. J. Impact Engng 6, 109-127.
30. Ross, C.A, Strickland, W.S., Sierakowski, R.L., 1977. Response and failure of simple structural elements subjected to blast loading. Shock and Vib. Digest 9, 15-26.
31. Shadbolt, P.J., Corran, R.S.J., Ruiz, C., 1983. A comparison of plate perforation models in the sub-ordnance impact velocity range. Int. J. Impact Engng 1, 23-49.
32. Shen, W.Q., Jones, N., 1992. A failure criterion for beams under impulsive loading. Int. J. Impact Engng 12, 101-121; 329.
33. Symonds, P.S. 1968. Plastic shear deformation in dynamic load problems. In: Heyman, J., Leckie, F.A (Eds.), Engineering Plasticity. Cambridge University Press, Cambridge, pp. 647-664.
34. Symonds, P.S., Fleming Jr., W.T., 1984. Parkes revised: on rigid-plastic and elastic plastic dynamic structural analysis. Int. J. Impact Engng 2, 1-36.
35. Symonds, P.S., Yu, T.X., 1985. Counterintuitive behavior in a problem of elastic-plastic beam dynamics. ASME, J. Appl. Mech. 52, 517-522.
36. Wang, L.L., Jones, N., 1996. An analysis of the shear failure of rigid-linear hardening beams under impulsive loading. Acta Mechanica Sinica (English Series) 12 (4), 338-348.
37. Wen, H.M., Jones, N., 1996. Low-velocity perforation of punch-impact-loaded metal plates. Trans. ASME J. Pressure Vessel Tech. 118, 181-187.
38. Wen, H.M., Reddy, T.Y., Reid, S.R., 1995. Deformation and failure of clamped beams under low speed impact loading. Int. J. Impact Engng 16, 435-454.
39. Youngdahl, C.K., 1971. Influence of pulse shape on the final plastic deformation of a circular plate. Int. J. Solids Struct. 7, 1127-1142.
40. Yu, T.X. 1993. Elastic effect in the dynamic plastic response of structures. In: Jones, N., Wierzbicki, T. (Eds.), Structural Crashworthiness and Failure. Elsevier, pp. 341-384.
41. Yu, T.X., Yang, J.L., Reid, S.R., 1997. Interaction between reflected elastic flexural waves and a plastic 'hinge' in the dynamic response of pulse loaded beams. Int. J. Impact Engng 19, 457-475.
42. Zener, C. 1948. The micro-mechanism of fracture. In: Sachs, G. (Ed.), Fracturing of Metals. American Society for Metals, Cleveland, Ohio, pp. 3-31.
43. Zhu, G., Huang, Y.G., Yu, T.X., Wang, R., 1986. Estimation of the plastic structural response under impact. Int. J. Impact Engng 4, 228-271.