Spectrum load effects on the fretting behavior of Ti-6Al-4V

ASTM Special Technical Publication

Volumn , Issue 1367, 2000, Pages 100-115

  Kinyon, Steven E ^a   Hoeppner, David W ^b  

^a MTS Systems Corp   (United States)

^b University of Utah   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

FRETTING CORROSION; LOADS (FORCES); MECHANICAL TESTING; PRESSURE EFFECTS; TITANIUM ALLOYS;

FRETTING FATIGUE; MINERS RULE; SPECTRUM LOAD EFFECTS;

FATIGUE OF MATERIALS;

EID: 0033881360     PISSN: 10403094     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1520/stp14724s     Document Type: Conference Paper

References (40)

1. Hoeppner, D., and Chandrasekaran, V., "Fretting in Orthopedic Implants: A Review," Wear, Vol. 173, 1994, pp. 187-189.
2. Zhou, Z. R., Cardou, A., Fiset, M., and Goudreau, S., "Fretting Fatigue in Electrical Transmission Lines," Wear, Vol. 173, 1994, pp. 179-188.
3. Harris, S. J., Waterhouse, R. B., and McColl, I. R., "Fretting Damage in Locked Coil Steel Ropes," Wear, Vol. 170, 1993, pp. 63-70.
4. Waterhouse, R.B., "Fretting Fatigue in Aqueous Electrolytes," Fretting Fatigue, Pergamon Press, 1981, p. 159.
5. Boddington, P. H. B., Chen, K. C., Ruiz, C., "An Investigation of Fatigue and Fretting in a Dovetail Joint," Experimental Mechanics, September, 1984, pp. 208-217.
6. Hoeppner, D.W., and Poon, C., "The Effect of Environment on the Mechanism of Fretting Fatigue," Wear, Vol. 52, 197, pp. 175-191.
7. Hoeppner, D. W., "Mechanisms of Fretting Fatigue," International Conference on Fretting Fatigue, Keynote Presentation, Sheffield, England, 1993.
8. Eden, E. M., Rose, W. N., and Cunningham, F. L., "The Endurance of Metals," Proceedings of the Institute of Mechanical Engineers, 1911, p. 875.
9. Tomlinson, G. A., "The Rusting of Steel Surfaces in Contact," Proceedings of the Royal Society, Series A, Vol. 115, 1927, pp. 472-483.
10. Buckwalter, T. V., and Horger, O. J., "Investigation of Fatigue Strength of Axles, Press-fits, Surface Rolling, and Effect of Size," Transactions of American Society for Metals, Vol. 25, 1937, p. 229.
11. Peterson, R. E., and Wahel, A. M., "Fatigue of Shafts at Fitted Members, with Related Photo-elastic Analysis," Transactions of American Society for Mechanical Engineers, Journal of Applied Mechanics, Vol. 57, 1935, p. A-1.
12. Tomlinson, B. A., Thorpe, P. L., and Gough, H. J., "An Investigation of the Fretting Corrosion of Closely Fitting Surfaces," 1939.
13. Warlow-Davies, E. J., "Fretting Corrosion and Fatigue Strength: Brief Results of Preliminary Experiments," Proceedings of the Institute of Mechanical Engineers, Vol. 146, 1941, pp. 32-38
14. Mindlin, R. D., 1949, "Compliance of Elastic Bodies in Contact," Transactions of American Society for Mechanical Engineers, Journal of Applied Mechanics, Vol. 71, pp. 259-268.
15. Halliday, J. S., and Hirst, W., "The Fretting Corrosion of Mild Steel," Proceedings of the Royal Society, Vol. 236, March 1956, pp. 411-425.
16. Godet, M., 1984, "The Third-Body Approach: A Mechanical View of Wear, " Wear, Vol. 100, pp. 437-452.
17. Colombie, Ch., Berthier, Y., Floquet, A., Vincent, L., and Godet, M., "Fretting: Load Carrying capacity of Wear Debris," Transaction of the ASME, Journal of Tribology, Vol. 106, April, 1984, pp. 194-201.
18. Hoeppner, D. W., Gates, F. L., "Fretting Fatigue Consideration in Engineering Design," Wear, Vol. 70, 1981, pp. 155-164.
19. Beard, J., "The Avoidance of Fretting," Materials and Design, Vol. 9, No. 4 July, 1988.
20. Lum, D. W., and Crosby, J., J., "Fretting Resistant Coatings for Titanium Alloys," NACE International Conference on Corrosion Fatigue: Chemistry, Mechanics and Microstructure, 1971.
21. Miner, M. A., "Cumulative Damage in Fatigue," Journal of Applied Mechanics, 1945, pp. 159-164.
22. Ten Have, A. A., "European Approaches in Standard Spectrum Development," Development of Fatigue Loading Spectra, ASTM STP 1006, 1989, pp. 17-35.
23. Mutoh, Y., Tanaka, K., and Kondoh, M, "Fretting Fatigue in JIS S45C Steel Under Two-Step Block Loading," Japan Society of Mechanical Engineers International Journa, Vol. 30, 1987, pp. 386-393.
24. Mutoh, Y., Tanaka, K., and Kondoh, M, "Fretting Fatigue in SUP9 Spring Steel Under Random Loading," Japan Society of Mechanical Engineers International Journal, Vol. 32, 1989, pp. 274-281.
25. Edwards, P., Ryman, R., "Studies in Fretting Fatigue Under Service Loading Conditions," Eigth International Committee on Aeronautical Fatigue, Lausanne, Switzerland, 1975.
26. McQuillan, A. D., McQuillan, M. K., Metallurgy of the Rare Metals-4: Titanium, Academic Press, London, 1956, pp. 1-50.
27. Hunter, M. A., "Metallic Titanium," Journal of the American Chemical Society, Vol. 32, Part 1, 1910, pp. 330-338.
28. United States of America Federal Aviation Administration Aircraft Certification Service Engine and Propeller Directorate, "Titanium Rotating Components Review Team Report," Dec. 1990.
29. Ryder, J. T., Petit, D. E., Krupp, W. E., Hoeppner, D. W., Final Report: Evaluation of Mechanical Property Characteristics of IMI 685, Lockheed-California Company, Rye Canyon Laboratory, October 1973.
30. Hatch, A. J., Partridge, J. M., and Broadwell, R. G., "Room-Temperature Creep and Fatigue Properties of Titanium Alloys," Journal of Materials, Vol. 2, No. 2, March 1967, pp. 111-119.
31. Milestone, W. D., "A new Apparatus for Investigating Friction and Metal-to-Metal Contact in Fretting Joints," Effects of Environment and Complex Load History on Fatigue Life, ASTM STP 462, 1970, pp. 318-328.
32. Hoeppner, D. W., and Goss, G. L., "Research on the Mechanism of Fretting Fatigue," NACE International Conference on Corrosion Fatigue: Chemistry, Mechanics and Microstructure, 1971.
33. Salkind, M. J., Lucas, J., J., "Fretting Fatigue in Titanium Helicopter Components," NACE International Conference on Corrosion Fatigue: Chemistry, Mechanics and Microstructure, 1971.
34. Waterhouse, R., B., "The Effect of Fretting Corrosion in Fatigue Crack Initiation," NACE International Conference on Corrosion Fatigue: Chemistry, Mechanics and Microstructure, 1971.
35. Waterhouse, R. B., and Dutta, M. K. "The Fretting Fatigue of Titanium and Some Titanium Alloys in a Corrosive Environment," Wear, Vol. 25, 1973, pp. 171-175.
36. Waterhouse, R. B. and Wharton, M., H., "The Behavior of Three High-Strength Titanium Alloys in Fretting Fatigue in a Corrosive Environment," Lubrication Engineering, Vol. 32, 1976, pp. 294-298.
37. Goss, G. L., and Hoeppner, D. W., "Normal Load Effects in Fretting Fatigue of Titanium and Aluminum Alloys," Wear, Vol. 27, 1974, pp. 153-159.
38. Lutynski, C., Simansky, G., and McEvily, A., J., "Fretting Fatigue of Ti-6A1-4V Alloy," Materials Evaluation Under Fretting Conditions, ASTM STP 780, 1982, pp. 150-164.
39. Waterhouse, R. B., and Iwabuchi, A., "High Temperature Fretting Wear of Four Titanium Alloys," Wear, Vol. 106, 1985, pp. 303-313.
40. Wulpi, D. J., Understanding How Copmponents Fail, American Society of Metals, April 1987, pp. 183-204.