Maintaining adhesion of protective Al2O3 scales

JOM

Volumn 52, Issue 1, 2000, Pages 22-25

  Smialek, James L ^a  

^a NASA GLENN RESEARCH CENTER   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ADHESION; ALUMINA; BONDING; DOPING (ADDITIVES); IMPURITIES; OXIDATION RESISTANCE; SCALE (DEPOSITS); SEGREGATION (METALLOGRAPHY); SULFUR; THERMODYNAMICS;

ALUMINA SCALES;

SUPERALLOYS;

EID: 0033881173     PISSN: 10474838     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11837-000-0110-4     Document Type: Article

References (38)

1. V.K. Tolpygo and D.R. Clarke, "Competition between Stress Generation and Relaxation during Oxidation of an FeCrAlY Alloy," Oxidation of Metals, 49 (1998), pp. 187-212.
2. C.E. Lowell et al., Oxidation of Metals, 36 (1/2) (1991), pp. 81-112.
3. J.A. Nesbitt and C.A. Barrett, "Predicting the Oxidation-Limited Lifetime of β-NiAl," Structural Intermetallics, ed. R. Darolia et al. (Warrendale, PA: TMS, 1993), pp. 601-609.
4. G.H. Meier, F.S. Pettit, and J.L. Smialek, "The Effects of Reactive Element Additions and Sulfur Removal on the Adherence of Alumina to Ni- and Fe-Base Alloys," Werstoffe und Korrosion, 46 (1995), pp. 232-240.
5. J.L. Smialek and G.H. Meier, "High Temperature Oxidation," Superalloys II, ed. C.T. Sims, N.S. Stoloff, and W.C. Hagel (New York: Wiley & Sons, 1987), pp. 293-326.
6. J. Doychak, C.A. Barrett, and J.L. Smialek, "Oxidation between 1100°C and 1600°C and Limiting Criteria for Use of Zr-doped β-NiAl and β/γ Alloys," Corrosion and Particle Erosion at High Temperatures, ed. V. Srinivasan and K. Vedula (Warrendale, PA: TMS, 1989), pp. 487-514.
7. C.A. Barrett, "The Effect of 0.1 Atomic Percent Zirconium on the Cyclic Oxidation Behavior of β-NiAl for 3000 Hours at 1200°C," Oxidation of High-Temperature Intermetallics, ed. T. Grobstein and J. Doychak (Warrendale, PA: TMS, 1988), pp. 67-83.
8. E. Lang, ed., The Role of Active Elements in the Oxidation Behavior of High Temperature Metals and Alloys (London: Elsevier, 1989).
9. W.E. King, ed., The Reactive Element Effect on High Temperature Oxidation - After Fifty Years (Aerdermannsdorf, Switzerland: Trans Tech Publications, 1989).
10. F.A. Golightly, F.H. Stott, and G.C. Wood, "The Relationship between Oxide Grain Morphology and Growth Mechanisms for Fe-Cr-Al and Fe-Cr-Al-Y Alloys," J. Electrochem. Soc., 126 (1979), pp. 1035-1042
11. J.K.Tien and F.S. Pettit, "Mechanism of Oxide Adherence on Fe-25Cr-4Al (Y or Sc) Alloys," Metall. Trans., 3 (1972), pp. 1587-1599.
12. B. A. Pint, "Experimental Observations in Support of the Dynamic-Segregation Theory to Explain the Reactive-Element Effect," Oxid. Met., 45 (1996), pp. 1-38.
13. J.G. Smeggil, A.W. Funkenbusch, and N.S. Bernstein, "A Relationship between Indigenous Impurity Elements and Protective Oxide Scale Adherence Characteristics," Metall. Trans. A, 17 (1986), pp. 923-932.
14. 3 Scales Formed on Undoped NiCrAl Alloy," N.L. Peterson Mem. Symp. Proc. on Oxidation and Associated Mass Transport (Warrendale, PA: TMS, 1986), pp. 297-313.
15. J.G. Smeggil, "Some Comments on the Role of Yttrium in Protective Oxide Scale Adherence," Mater. Sci. Engineer., 87 (1987), pp. 261-265.
16. W.Y. Lee et al., "Effects of Sulfur Impurity on the Scale Adhesion Behavior of a Desulfurized Ni-Based Superalloy Aluminized by Chemical Vapor Deposition," Metall. Trans., 29A (1998), pp. 833-841.
17. J.L. Smialek, "Toward Optimum Scale and TBC Adhesion on Single Crystal Superalloys," High Temperature Corrosion and Materials Chemistry, ed. P.Y. Hou et al. (Pennington, NJ: Electrochemical Society, 1998), pp. 211-221.
18. D.T. Jayne and J.L. Smialek, "A Sulfur Segregation Study of PWA 1480 NiCrAl and NiAl Alloys," Microscopy of Oxidation II, ed. S.B. Newcomb and M.J. Bennett (London: Institute of Metals, 1993), pp. 183-196; also NASA TM 106289 (1993).
19. Miyahara et al., "Sulfur Segregation on Nickel," Scripta Met., 19 (1985), pp. 117-121.
20. J.L. Smialek, "Oxidation Resistance and Critical Sulfur Content of Single Crystal Superalloys," Paper ASME 96-GT-519 (New York: ASME, 1996), pp. 1-7.
21. P.Y. Hou and J. Stringer, "Oxide Scale Adhesion and Impurity Segregation at the Scale/Metal Interface," Oxid. Met., 83 (1992), pp. 323-345.
22. 2O and in Air," Electrochemical Society Proceedings, 96-26 (Pennington, NJ: Electrochem. Soc., 1996), pp. 344-356.
23. P.R. Aimone and R.L. McCormick, "The Effects of Yttrium and Sulfur on the Oxidation Resistance of an Advanced Single Crystal Nickel Based Superalloy," Superalloys '92, ed. S.D Antolovich et al. (Warrendale, PA: TMS, 1992), p. 817.
24. Broomfield et al., "Development and Turbine Engine Performance of Three Advanced Rhenium Containing Superalloys for Single Crystal and Directionally Solidified Blades and Vanes," Congress of the IGTI (New York: ASME, 1997), 97-GT-117.
25. J.L. Smialek, C.A. Barrett, and J.C. Schaeffer, "Design for Oxidation," Design for Properties, ASM Handbook, 20 (Materials Park, OH: ASM, 1997), pp. 589-602.
26. S.Y. Hong, A.B. Anderson, and J.L. Smialek, "Sulfur at Nickel-Alumina Interfaces," Surface Science, 230 (1990), pp. 174-183.
27. H.E. Evans et al., "Creep Effects of an Alumina Layer from a NiCrAlY Coating," Mat. Sci. Engineer., A225 (1997), pp. 1-8.
28. K.L. Luthra and C.L. Briant, "Thermodynamics of Segregation in Alloys," Metall. Trans., 19A (1988), pp. 2091-2098.
29. J.L. Smialek and R. Browning, "Current Viewpoints on Oxide Adherence Mechanisms," NASA TM-87143 (October 1985); also Electrochem. Soc. Symp. Proc. on High Temp. Matls. Chem. III, ed. Z.A. Munir and D. Cubicciotti (Pennington, NJ: Electrochem. Soc., 1986), pp. 259-271.
30. D.R. Sigler, "Adherence Behavior of Oxide Grown in Air and Synthetic Exhaust Gas on Fe-Cr-Al Alloys Containing Strong Sulfide-Forming Elements: Ca, Mg, Ce, La, Ti, and Zr," Oxid. Met., 40 (1993), pp. 555-583.
31. 3 Scale Grain Boundaries," Microscopy of Oxidation, 3, ed. S.B. Newcomb and J.A. Little (London: IOM, 1997), pp. 153-165.
32. W.J. Quadakkers, "Influence of Sulfur Impurity on Oxidation Behavior of Ni-10Cr-9Al in Air at 1000°C," Mat. Sci. Techn., 4 (1988), pp. 1119-1125.
33. A.S. Khanna, H. Jonas, and W.J. Quadakkers, "Use of Acoustic Emission Technique to Study the Spalling Behavior of Oxide Scales on Ni-10Cr-8Al Containing Sulphur and/or Yttrium Impurity," Werkstoffe und Korrosion, 40 (1989), pp. 552-558.
34. J.L. Smialek, "The Effect of Sulfur and Zirconium Co-doping on the Oxidation of NiCrAl," Proc. High Temp. Materials Chemistry IV, ed. Z.A. Munir, D. Cubicciotti, and H Tagawa (Pennington, NJ: Electrochem. Soc., 1988), pp. 241-253.
35. R.M. Crispin and M. Nicholas, "The Wetting and Bonding Behavior of Some Nickel Alloy-Alumina Systems," J. Mat. Sci., 11 (1976), pp. 17-21.
36. J.E. McDonald and J.G. Ebehart, "Adhesion in Aluminum Oxide-Metal Systems," Trans. TMS-AIME, 233 (New York: TMS-AME, 1965), pp. 512-517.
37. S.V. Pepper, "Shear Strength of Metal-Sapphire Contacts," J. Appl. Phys., 47 (1976), pp. 801-808.
38. 3Al-Based Alloy," Microscopy of Oxidation, 4, ed. S.B. Newcomb (in press).