Hydrogen solubility, diffusion and trapping in high purity aluminum and selected Al-base alloys

Materials Science Forum

Volumn 331, Issue , 2000, Pages

  Scully, J R ^a   Young Jr , G A ^a   Smith, S W ^a  

^a University of Virginia   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AGING OF MATERIALS; ALUMINUM; CRYSTAL DEFECTS; DESORPTION; DIFFUSION IN GASES; DISLOCATIONS (CRYSTALS); HYDROGEN EMBRITTLEMENT; PHASE COMPOSITION; POLYCRYSTALLINE MATERIALS; PRECIPITATION (CHEMICAL); SOLID SOLUTIONS; SOLUBILITY;

ENVIRONMENTAL ASSISTED CRACKING; HYDROGEN DIFFUSION; HYDROGEN SOLUBILITY; HYDROGEN TRAPPING; PERMEATION;

ALUMINUM ALLOYS;

EID: 0033877338     PISSN: 02555476     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Article

References (85)

1. N.J.H. Holroyd, Environment-Induced Cracking of Metals: NACE-10, eds. R.P. Gangloff, M.B. Ives, (Houston, TX: NACE, 1990), pp. 311-343.
2. D.O. Sprowls, R.H. Brown, Fundamental Aspects of Stress Corrosion Cracking, (Houston, TX: NACE, 1969), p. 466.
3. W. Gruhl, Z. Metallkde, 75 (1984) p. 819.
4. R.J. Gest, A.R. Troiano, Corrosion, 30, (1974), pp. 274-279.
5. Hyatt, M.V. and M.O. Speidel, Stress-Corrosion Cracking of High-Strength Aluminum Alloys, Report No. D6-24840, Boeing, Seattle, WA, (1970).
6. Speidel, M.O., Hydrogen Embrittlement and Stress Corrosion Cracking of Aluminum Alloys, in Hydrogen Embrittlement and Stress Corrosion Cracking, Gibala and Hehemann, editors, ASM, (1984) p. 271-296.
7. Watkinson, F.E. and J.C. Scully, Corrosion Science, 11, (1971), p. 179-182.
8. Christodoulou, L. and H.M. Flower, Acta metall., 28, (1980), p. 481-487.
9. Tuck, C.D.S., Met. Trans. A, 16A, (1985), p. 1503-1514.
10. Scamans, G.M., R. Alani, and P.R. Swann, Corrosion Science, 16, (1976), pp. 443-459.
11. Scamans, G.M., Aluminium, 58, (1982), pp. 332-334.
12. Koch, G.H., Corrosion, 35, (1979), pp. 73-78.
13. Vennett, R.M., Trans. ASM, 62, (1969), pp. 1007.
14. Hardie, D., N.J.H. Holroyd, and R.N. Parkins, Metal Science, 13, (1979), pp. 603-610.
15. Scamans, G.M., Met. Trans. A, 11A, (1980), pp. 846-850.
16. Alani, R. and P.R. Swann, Br. Corr. Jour., 12(2), (1975), pp. 80-85.
17. Christodoulou, L. and H.M. Flower, in Hydrogen Effects in Metals, I.M. Bernstein and A.W. Thompson, editors, TMS, (1980), pp. 493-501.
18. Scamans, G.M., Journal of Materials Science, 13, (1978), pp. 27-36.
19. George A. Young, Jr. "Hydrogen Environment Assisted Cracking of an Al-Zn-Mg(Cu) Alloy, (Ph.D. dissertation, Univ. of Virginia., 1999).
20. Young, L.M., G.A. Young, J.R. Scully, and R.P. Gangloff, "The Effects of Electrode Potential and Temper on Environment Assisted Cracking in AA 7050" in Lightweight Alloys for Aerospace Applications IV., E.W. Lee, editor, TMS, (1997), pp. 3-18.
21. D.A. Hardwick, M. Taheri, A.W. Thompson, I.M. Bernstein, Met. Trans. A, 13A, (1982), pp. 235-239.
22. K. Higashi, T. Ohmishi, Y. Nakatani, K. Okabayshi, J. Japanese Light Metals, 31 (1981), p. 386.
23. K.S. Shin, S.S. Kim, E.W. Lee, Aluminum Lithium Alloys V, eds. E.A. Starke and T.H. Sanders, Birmingham, UK: MCE Publications, (1989), pp. 1319-1328.
24. K.S. Shin, N.J. Austin, S.S. Kim, in Hydrogen Effects on Material Behavior, eds. N.R. Moody and A.W. Thompson, Warrendale, PA: TMS, (1990), pp. 1023-1031.
25. E.I. Meletis, W. Huang, Aluminum Lithium Alloys V, eds. E.A. Starke and T.H. Sanders, Birmingham, UK: MCE Publications, (1989), pp. 1309-1318.
26. E.I. Meletis, W. Huang, Mater.Sci. and Eng.A, A148, (1991), pp. 197-209.
27. R.S. Piascik and R.P. Gangloff, Metall. Trans. A, 22A, (1991), pp. 2415-2428.
28. R. Balasubramaniam, D.J. Duquette, K. Rajan, Acta. Mater., 39, (1991), pp. 2597-2605.
29. R. Balasubramaniam, D.J. Duquette, K. Rajan, Acta.Mater., 39, (1991), pp. 2607-2613.
30. Smith, S.W. and J.R. Scully, Hydrogen Trapping and its Correlation to the Hydrogen Embrittlement Susceptibility of Al-Li-Cu-Zr Alloys, in Hydrogen Effects in Metals, A.W. Thompson and N.R. Moody, editors, TMS, Moran, Wyoming, (1994), pp. 131-141.
31. R.M. Barrer, DIFFUSION IN AND THROUGH SOLIDS, Cambridge Press, p. 153, 1941.
32. R. Eborall, C.E. Ransley, Jour. Inst. Met., 71, (1945), pp. 525-552.
33. Hashimoto, H. and T. Kino, "Hydrogen Diffusion in Aluminium at High Temperatures", J. Phys. F, Metal Phys., Vol. 13, (1983), p. 1157-1165.
34. M.A.V. Devanathan, Z. Stachurski, Proc. Royal Soc., 270A, 90, (1962), pp. 90-102.
35. R. Edwards, W. von Eichenauer, Scripta Met., 14, (1980), pp. 971-973.
36. W. von Eichenauer, Z. Metallkde., 59, (1968), pp. 613-616.
37. J.W. Watson, "Hydrogen in Aluminum and Aluminum-Lithium Alloys", (Ph.D. dissertation, Northwestern University, 1988).
38. Ransley, C.E. and H. Neufeld, J. Inst. Met., 74, (1948), pp. 599-620.
39. W. von Eichenauer, A. Pebler, Z. Metallkde., 48, (1957), pp. 373-378.
40. Eichenauer, W., K. Hattenbach, and A. Pebler, "Die Loslicheit von Wasserstoff in festim und flussigem Aluminum", Z. Metallkde, 52(10), (1961), pp. 682-684.
41. P.N. Anyalebechi, D.E.J. Talbot, D.A. Granger, in Light-Weight Alloys for Aerospace Applications, eds. E.W. Lee, E.H. Chia, N.J. Kim, (Warrendale, PA: TMS, 1989), pp. 249-268.
42. P.N. Anyalebechi, Met. Trans. B, 21B, (1990), pp. 649-654.
43. P.N. Anyalebechi, in Light Metals, ed. B. Welch, TMS, (1998), pp. 827-842.
44. Csanady, A. and K. Papp, Materials Science & Engineering, 48, (1981), pp. 35-39.
45. G.M. Pressouyre, F.M. Faure, in Hydrogen Embrittlement - Prevention and Control, ASTM STP 962, L. Raymond Editor, ASTM Philadelphia. PA, (1988), pp. 353-371.
46. Matsuo, S. and T. Hirata, J. Japan Inst. Metals, 31, (1967), pp. 590-593.
47. Ichimura, M. and M. Imabayashi, Japan. Inst. Metals, 43, (1979), pp. 876-883.
48. Papp, K. and E. Kovacs-Csetenyi, Scripta Met., 15, (1981), pp. 161-164.
49. Outlaw, R.A., D.T. Petersen, and F.A. Schmidt, Scripta Met., 16, (1982), pp. 287-292.
50. Ishikawa, T. and R.B. McLellan, Acta metall., 34(6), (1986), pp. 1091-1095.
51. Saitoh, H., Y. Iijima, and H. Tanaka, Acta metall., 42(7), (1994), pp. 2493-2498.
52. Braun, R., H.-J. Schluter, H. Zuchner, and H. Buhl, in Hydrogen Transport and Cracking in Metals, A. Turnbull, editor, The Institute of Materials, Teddington, UK, (1994), pp. 280-288.
53. Ransley, C.E. and D.E.J. Talbot, Z. Metallk., 46(5), (1955), p. 328-337.
54. Papp, K. and E. Kovacs-Csetenyi, Scripta Metall., 11, (1977), pp. 921-923.
55. G.A. Young, Jr., J.R. Scully, Acta mater., 46(18), (1998), pp. 6337-6349.
56. Talbot, D.E.J., International Metallurgical Reviews, 20, (1975), pp. 166-184.
57. Popovic, Z.D. and M.J. Stott, Phys. Rev. Lett., 33(19), (1974), pp. 1164-1167.
58. Itoh, G., K. Koyama, and M. Kanno, Scripta Mat., 35(6), (1996), pp. 695-698.
59. Schaefer, H.-E., R. Gugelmeier, M. Schmolz, and A. Seeger, Materials Science Forum, (1987), pp. 111-116.
60. Rajainmaki, H., S. Linderoth, R.M. Nieminen, and H.E. Hansen, Materials Science Forum, 15-18, (1987), pp. 611-616.
61. Watson, J.W. and M. Meshii, in Hydrogen Effects on Material Behavior, N.R. Moody and A.W. Thompson, editors, TMS, (1989), pp. 241-248.
62. Birnbaum, H.K., et al., J. of Alloys and Compounds, 253-254, (1997), pp. 260-264.
63. Watson, J.W., "Hydrogen in Aluminum and Aluminum-Lithium Alloys," Ph.D., Northwestern University, 1988.
64. Gest, R.J. and A.R. Troiano, Corrosion, 30(8), (1974), pp. 274-279.
65. Gest, R.J. and A.R. Troiano, Hydrogen Embrittlement and Stress Corrosion Cracking in Aluminum Alloys, in L'Hydrogene dans les Metaux, Editions Science et Industrie, Paris, p. 427-432, 1972.
66. Nakashima, M., M. Saeki, Y. Aratono, and E. Tachikawa, J. Nucl. Mats, 116(141-146), (1983), pp. 141-146.
67. Onuchukwu, A.I. and S. Trasatti, Electrochemica Acta, 33(10), (1988), pp. 1425-1430.
68. Tuck, C.D.S. and G.M. Scamans. Comparative Hydrogen Permeation Studies of Aluminum Alloys Exposed to Water Vapor, in Second International Congress on Hydrogen in Metals. (1977), Paris, France.
69. Wefers, K. and C. Misra, Oxides and Hydroxides of Aluminum, Technical Paper No. 19, Alcoa Laboratories, Alcoa Center, 1987.
70. Gasem, Z., Ph.D. Thesis, University of Virginia, Charlottesville, 1999.
71. Gingell, A.D.B., Corrosion Fatigue Crack Growth and Hydrogen Embrittlement in High Strength Aluminum Alloy 7150, Ph.D., Cambridge University, Cambridge, 1994.
72. Holroyd, N.J.H. and D. Hardie, Corros. Sci. 23(6), (1983), pp. 527-546.
73. Edwards, A.H. and W. Eichenauer, Scripta Met., 14, (1980), pp. 971-973.
74. Siegel, R.W., J. Nuc. Mater., 69&70, (1978), pp. 117-146.
75. Leger, M. and G.R. Piercy, Phil. Mag. A, 43(2), (1981), pp. 337-385.
76. Saitoh, H., Y. Iijima, and K. Hirano, 29, (1994), pp. 5739-5743.
77. Iijima, Y., et al., J. Mat. Sci., 27(21), (1992), pp. 5735-5738.
78. S.W. Smith, J.R. Scully, Metall. and Mat. Trans. A, March, 2000.
79. Hidvega, E. and E. Kovacs-Csetenyi, Mat. Sci. Eng., 27, (1977), pp. 39-43.
80. Turnbull, A., R.B. Hutchings, and D.H. Ferriss, Mat. Sci. and Eng., A238, (1977), pp. 317-328.
81. DeIasi, R. and P.N. Adler, Met. Trans. A, 8A, (1977), pp. 177-1190.
82. Adler, P.N., Met. Trans. A, 8A, (1977), pp. 1185-1190.
83. Wert, J.A., Scripta Met., 15, (1981), pp. 445-447.
84. Staley, J.T., Met. Trans., 5, (1974), pp. 929-932.
85. Chinh, N.Q., et al., Z. Metallkd., 88(8), (1997), pp. 607-611.