Analysis of compressing and shearing behavior of powders in high-speed elliptical-rotor-type powder mixer (HEM)

Journal of Chemical Engineering of Japan

Volumn 33, Issue 3, 2000, Pages 499-506

  Iwasaki, Tomohiro ^a   Koga, Takaomi ^a   Satoh, Munetake ^a  

^a Osaka Prefecture University   (Japan)

Author keywords

Elliptical rotor; Plastic equilibrium; Powder compression; Powder mixing; Torque curve

Indexed keywords

COMPRESSION; POWDER; SHEAR STRENGTH; SOLID-SOLID MIXING;

EID: 0033858601     PISSN: 00219592     EISSN: None     Source Type: Journal    
DOI: 10.1252/jcej.33.499     Document Type: Article

References (22)

1. Ata, A., Y. I. Rabinovich, R. K. Singh and W. Hendrickson; "Magnetically Assisted Impaction Coating Process to Synthesize Engineered Particulates with Controlled Surface Characteristics," Mater. Res. Soc. Symp. Proc., 501, 333-338 (1998)
2. Endoh, S., S. Koyanaka, H. Hatano, T. Tanimoto and M. Naito; "Characterization of Composite Particle Layer Formed with a High-Speed Elliptical-Rotor-Type Mixer," Kagaku Kogaku Ronbunshu, 25, 92-98 (1999)
3. Iwasaki, T., T. Yanagida and M. Satoh; "Effect of Operating Conditions in Powder Metal Compounding Process on Particle Size Change," J. Japan Soc. Powder and Powder Met., 45, 271-275 (1998a)
4. Iwasaki, T., T. Yanagida and M. Satoh; "Simulation of Composite Particle Growth in Dispersion and Compounding Process of Alloy Particle and Ceramic Powder," J. Japan Soc. Powder and Powder Met., 45, 362-367 (1998b)
5. Iwasaki, T., T. Koga and M. Satoh; "Dynamic Characteristics of High-Speed Elliptical-Rotor-Type Powder Mixer," J. Japan Soc. Powder and Powder Met., 45, 812-816 (1998c)
6. Iwasaki, T., T. Masuda, M. Satoh and T. Fujita; "Manufacturing Process and Evaluation of UV-Attenuating Powder Containing ZnO Fines," Preprint of the 37th Symposium on Powder Science and Technology, p. 91-94, Hokkaido, Japan (1999)
7. Jono, K., H. Ichikawa and Y. Fukumori; "Relation of Drug Release and Membrane Properties of Ethylcellulose Microcapsules Prepared by a High-Speed Elliptical-Rotor Type Powder Mixer," Preprint of the 36th Symposium on Powder Science and Technology, p. 35-39, Nagoya, Japan (1998)
8. Kaga, H., Y. Taya, H. Katayama, Y. Hamaguchi and K. Mukaida; "Physical Preparation of Metal-Oxide Composite Particles under Vacuum," Powder Technol., 91, 147-155 (1997)
9. Kano, J. and F. Saito; "Correlation of Ball Impact Energy with Yield of Soluble Vanadium Compound Produced in EP Dust by Dry Mechanochemical Treatment," J. Chem. Eng. Japan, 31, 1014-1015 (1998)
10. Kawakita, K., I. Hattori and M. Kishigami; "Characteristic Constants in Kawakita's Powder Compression Equation," J. Powder Bulk Solids Technol., 1, 3-8 (1977)
11. Koc, R. and S. V. Cattamanchi; "Synthesis of Beta Silicon Carbide Powders Using Carbon Coated Fumed Silica," J. Mat. Sci., 33, 2537-2549 (1998)
12. Naito, M., T. Hotta, S. Asahi and T. Tanimoto; "Deposition of Fine Particles on Surface of Core Particles by High-Speed Elliptical-Rotor-Type Mixer," Kagaku Kogaku Ronbunshu, 24, 52-56 (1998a)
13. Naito, M., T. Hotta, S. Asahi, T. Tanimoto and S. Endoh; "Effect of Processing Conditions on Particle Composite Process by a High-speed Elliptical-Rotor-Type Mixer," Kagaku Kogaku Ronbunshu, 24, 99-103 (1998b)
14. Naito, M., T. Hotta, T. Tanimoto, S. Endoh and K. Nogi; "Effect of Fine Particle Size on Particle Composite Process by a High-Speed Elliptical-Rotor-Type Mixer," Kagaku Kogaku Ronbunshu, 26, 62-67 (2000)
15. Satoh, M., K. Higashi, F. Hamano, K. Miyanami, T. Ito and H. Yoshida; "Dispersion of Ceramic Powders into Particulate Superplastic Al-Ni Alloy," J. Mat. Sci., 27, 5003-5007 (1992)
16. Satoh, M., T. Yoshida, K. Miyanami and Y. Okudaira; "Evaluation of the Performance of a High-Speed Elliptical-Rotor-Type Powder Mixer," J. Soc. Powder Technol., Japan, 31, 789-794 (1994)
17. Satoh, M., T. Iwasaki and K. Miyanami; "Characteristic Curves of Shearing for a Powder Bed Measured with a Rotary-Intrusion-Type Rheometer," J. Soc. Powder Technol., Japan, 33, 510-515 (1996)
18. Satoh, M., T. Yanagida and T. Iwasaki; "Dispersion and Compounding Process of Particulate Ag-Ni Alloy and Fine WC Powder Using a High-Speed Elliptical-Rotor-Type Powder Mill," J. Japan Soc. Powder and Powder Met., 44, 618-621 (1997)
19. Shinohara, K. and K. Ueno; "Surface Uniformity of Individual Fine Particles Coated by Rotational Impact," Kagaku Kogaku Ronbunshu, 25, 428-434 (1999)
20. Sugai, Y. and M. Satoh; "Application of a Tensile Test Method for the Evaluation of Unraveling State of Fibrous Filler in Powder-Fiber Mixtures," J. Soc. Powder Technol., Japan, 36, 10-15 (1999)
21. Yabune, H., J. Kano and F. Saito; "Daen-rota-gata Kongoki-nai Funtaikyodo no Shimyureshon," Proceedings of Autumn Meeting on Powder Technology, SPTJ, p. 113-116, Tokyo, Japan (1998) (in Japanese)
22. Zhang, D. L. and J. J. Richmond; "Microstructural Evaluation during Combustion Reaction between CuO and Al Induced by High Energy Ball Milling," J. Mat. Sci., 34, 701-706 (1999)