Effect of microstructure variations on the formation of deformation-induced martensite and associated tensile properties in a β metastable Ti alloy

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 31, Issue 4, 2000, Pages 1095-1106

  Grosdidier, T ^a,d   Combres, Y ^b   Gautier, E ^a   Philippe, M J ^c  

^a CNRS   (France)

^b UNIVERSITÉ DE TECHNOLOGIE DE BELFORT MONTBÉLIARD   (France)

^c Centre de Recherche   (France)

^d UNIVERSITÉ PAUL VERLAINE METZ   (France)

Author keywords

[No Author keywords available]

Indexed keywords

DEFORMATION; DISLOCATIONS (CRYSTALS); GRAIN SIZE AND SHAPE; MARTENSITIC TRANSFORMATIONS; METALLOGRAPHIC MICROSTRUCTURE; STATISTICAL METHODS; STRAIN HARDENING; STRESS ANALYSIS; TENSILE PROPERTIES; VOLUME FRACTION; YIELD STRESS;

DEFORMATION-INDUCED MARTENSITE;

TITANIUM ALLOYS;

EID: 0033751707     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-000-0105-3     Document Type: Article

References (49)

1. H. Funakubo: Shape Memory Alloys, Gordon and Breach Science Publishers, London, 1987.
2. T.W. Duerig, K.N. Melton, D. Stôckel, and C.M. Wayman: Engineering Aspect of Shape Memory Alloys, Butterworth-Heinemann, Stoneham, MA, 1990.
3. I. Tamura and C.M. Wayman: in Martensite, G.B. Olson and W.S. Owen, eds., ASM INTERNATIONAL, Materials Park, OH, 1992, pp. 227-42.
4. E. Patoor and M. Berveiller: Technologie des Alliages à Mémoire de Forme, Hermes Science Publisher, Paris, France, 1994.
5. J.R. Patel and M. Cohen: Acta Metall., 1953, vol. 1, p. 531.
6. V.F. Zackay, E.R. Parker, D. Farh, and R. Bush: Trans. ASM, 1967, vol. 60, p. 252.
7. G.B. Olson and M. Cohen: Metall. Trans. A, 1982, vol. 13A, pp. 1907-14.
8. E. Gautier, A. Simon, and G. Beck: Proc. Int. Conf. Martensitic Transformation, The Japan Institute of Metals, Sendai, 1986, p. 503.
9. T.W. Duerig, R.M. Middleton, G.T. Terlinde, and J.C. Williams: Proc. 4th Int. Conf. on Titanium, H. Kimura and O. Izumi, eds., TMS-AIME, Warrendale, PA, 1980, p. 1503.
10. T.W. Duerig, G.T. Terlinde, and J.C. Williams: Metall. Trans. A, 1980, vol. 11 A, pp. 1987-98.
11. U.M. Flower: Proc. 5th Int. Conf. on Titanium, Les Ulis, France, 1984, p. 1651.
12. S. Hanada and O. Izumi: Metall. Trans. A, 1986, vol. 17A,pp. 1409-20.
13. S. Hanada and O. Izumi: Metall. Trans. A, 1987, vol. I8A, pp. 265-71.
14. S. Ishiyama, S. Hanada, and O. Izumi: Iron Steel Inst. Jpn. Int., 1991, vol. 31, pp. 807-13.
15. A.I.P. Nwobu, H.M. Flower, and D.R.F. West: Proc. 7th Int. Conf. on Titanium-92, F.H. Froes and I.L. Caplan, eds., TMS, Warrendale, PA, 1993, pp. 531-538.
16. S. Ishiyama and S. Hanada: The Sumitomo Search, 1993, vol. 54, pp. 41-47.
17. A. Nieotra and M.J. Philippe: Proc. "Beta Titaniun Alloys, " A. Vassel, D. Eylon, and Y. Combres, eds., La Revue de Métallurgie, Paris, 1994, pp. 189-96.
18. H. Ohyama and T. Nishimura: Proc. 8th Int. Conf. on Titanium-95, P.A. Blenkinsop, W.J. Evans, and H.M. Flower: The Institute of Materials, London, 1996, pp. 2273-2280.
19. T. Grosdidier, C. Roubaud, M.J. Philippe, and Y. Combres: Proc. 8th Int. Conf. on Titanium-95, P.A. Blenkinsop, W.J. Evans, and H.M. Flower, eds., The Institute of Materials, London, 1996, pp. 2345-2352.
20. T. Grosdidier, C. Roubaud, M.J. Philippe, and Y. Combres: Scripta Mater., 1997, vol. 36, pp. 21-28.
21. B. Prandi, E. Alheritiere, F. Schwartz, and M. Thomas: 6th World Conf. on Titanium, Part II P. Lacombe, R. Tricot, and G. Béranger, eds., Les Editions de Physique, Les Ulis, 1988, pp. 811-18.
22. T. Grosdidier, C. Roubaud, M.J. Philippe, S. Zaefferer, M. Zandona, E. Gautier, and Y. Combres: J. Phys. IV, 1996, vol. 6, pp. 435-44.
23. C. Servant, C. Quesne, T. Baudin, and R. Penelle: 7th World Conf. on Titanium, Part III, F.H. Froes and I.L. Caplan, eds., TMS, Warrendale, PA, 1992, pp. 89-96.
24. Y. Combres, G. Dumas, A.M. Chaze, and B. Champin: 7th World Conf. on Titanium, Part III, F.H. Froes and I.L. Caplan, eds., TMS, Warrendale, PA, 1992, pp. 101-112.
25. A. Henry: Ph.D. Thesis, University of Paris, Paris, eds., 1993.
26. R. Sanguinetti, M. Zandona, A. Pianelli, and E: Gautier: J. Phys. IV, 1993, Coll. C7;pp. 527-31.
27. J. Béchet, C. Angelier, B. Cormier, O. Lacagne, and M. Lhermitte: 7th World Conf. on titanium. Part HI, F.H. Froes and I.L. Caplan, eds., TMS, Warrendale, PA, 1992, pp. 643-50.
28. C. Angelier: Ph.D. Thesis, CNAM-Paris, Paris, 1993.
29. J. Lacaze and G. Lesoult: Proc. "Nature and Properties of Semi Solid Materials, " J.A. Sekhar and J.A. Dantzig, eds., TMS, Warrendale, PA, 1991, pp. 105-41.
30. J.L. Pouchou and F. Pichoir: J. Phys., 1984, Coll. C2 (45), pp. 17-20.
31. "CAMEBAX SX 50," Cameca Technical Document, Courbevois, France, 1993.
32. Nakajima and Koiwa: Iron Steel Inst. Jpn. Int. 1991, vol. 31, p. 757.
33. M.Umemoto and W.S. Owen: Metall. Trans., 1974, vol. 5, pp. 2041-46.
34. S. Kajiwara: Metall. Trans. A, 1986, vol. 17A, pp. 1693-1702.
35. S. Sujimoto, H. Sakamoto, T. Harar and H. Tsuchiya: J. Phys. IV, -1995, vol. 5 (C8), p. 925.
36. I. Dvorak and E.B. Hawbolt: Metall. Trans. A, 1975, vol. 6A, pp. 95-99.
37. G.N. Sury and L.C. Brown: Metall. Trans. A, 1984, vol. 15 A, pp. 1613-21.
38. Y. Liu, Z.L. Xie, H. Hanninen, J. Van Humbeeck, and J. Pietikainen: J. Phys. IV, 1995, vol. 5 (C8), p. 179.
39. Y.H. Wen, S. Denis, and E. Gautier: J. Phys. IV, 1996, vol. 6, p. 475.
40. M. Tokizane: Scripta Metall., 1976, vol. 10, pp. 459-62.
41. M. Tokizane and Y. Maruyama: Scripta Metall, 1978, vol. 12, p. 233.
42. K. Wakasa and T. Nakamura: Scripta Metall., 1978, vol. 12, p. 459.
43. G. Collette: Ph.D. Thesis, Ecole des Mines, Nancy, 1980.
44. J.R.C. Guimaraes and J.C. Shyne: Metall. Trans., 1971, vol. 2, pp. 2063-65.
45. D.R. Wollman and J.R.C. Guimaraes: Scripta Metall., 1973, vol. 7, pp. 355-60.
46. T.N. Durlu and J.W. Christian: Proc. ICOMAT-79, 1979, pp. 343-48.
47. F. Lecroisey and A. Pineau: Metall. Trans., 1972, vol. 3, pp. 387-96.
48. T. Grosdidier and M.J. Philippe: 9th World Conf. on Titanium, St Petersburg, Russia, June 7-11, 1999, in press.
49. A. Eberhardt and P. Barbe: University of Metz, Metz, private communication, 1998.