On the pore structure and dewatering properties of the pulp fiber cell wall

Acta Polytechnica Scandinavica, Chemical Technology Series

Volumn , Issue 275, 2000, Pages 2-45

  Maloney, Thad C ^a  

^a AALTO UNIVERSITY   (Finland)

Author keywords

[No Author keywords available]

Indexed keywords

DEWATERING; DRYING; NATURAL FIBERS; POROSITY; PRESSING (FORMING); SWELLING; WOOD;

THERMOPOROSIMETRY;

PULP;

EID: 0033747657     PISSN: 12390518     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (108)

1. Stone, J. E., Scallan, A. M., and Abrahamson, B., Influence of beating on cell wall swelling and internal fibrillation. Svensk Papperstidn. 19(1968)10, pp. 687-694.
2. Stone, J. E. and Scallan, A. M., The effect of component removal upon the porous structure of the cell wall of wood. II. Swelling in water and the fiber saturation point. Tappi J. 50(1967)10, pp. 496-501.
3. Wahlström, P. B., The effect of water in the fiber wall in wet pressing. 44th Appita Annual General Conference, Rotorua, New Zealand, 1990, pp. A21.1-A21.24.
4. Szikla, Z., On the Basic Mechanisms of Wet Pressing. Doctoral Thesis, Helsinki University of Technology, Espoo, Finland, 1992.
5. Scallan, A. and Grignon, J., The effect of cations on pulp and paper properties. Svensk Papperstidn. 82(1979)2, pp. 40-47.
6. Salmen L., Responses of paper properties to changes in moisture content and temperature. Products of Papermaking, Transactions of the 10th Fundamental Research Symposium Held at Oxford, 1993, pp. 369-430.
7. Eriksson, I., Haglind, I., Lidbrandt, O., and Salmen, L., Fiber swelling favoured by lignin softening. Wood Sci. Technol. 25(1991)2, pp. 135-144.
8. Zauscher, S., Caulfield, D., and Nissan, A., Influence of water on the elastic modulus of paper. Tappi J. 80(1997)1, pp. 214-223.
9. Goring, D. A., The effect of cellulose on the structure of water: view 1. Fiber-Water Interactions in Paper-Making, Transactions of the Symposium Held at Oxford, 1977, pp. 43-62.
10. Li, T., Interactions Between Water and Cellulose Fibers, Application of NMR Techniques. Doctoral Thesis, Royal Institute of Technology, Stockholm , 1991.
11. Campbell, W. B., The surfaces of cellulose. Tappi J. 32(1949)6, pp. 265-271.
12. Lindström, T. and Carlsson, G., The effect of chemical environment of fiber swelling. Svensk Papperstidn. 85(1982)3, pp. R14-R20.
13. Zeronian, S. H., Intercrystalline swelling of cellulose. Cellulose Chemistry and Its Application. Edited by Novell, T. P. and Zeronian, S. H., Ellis Horwood Limited, 1985, pp. 138-158.
14. Mantanis, G. I., Young, R. A., and Rowell, R. M., Swelling of wood. Wood Sci. Technol. 28(1994)pp. 119-134.
15. Stone, J. E. and Scallan, A. M., A structural model for the cell wall of water swollen wood pulp fibers based on their accessibility to macromolecules. Cellul. Chem. Technol. 2(1968)3, pp. 343-358.
16. Kerr, A. J. and Goring, D. A. I., The ultrastructural arrangements of the wood cell wall. Cellul. Chem. Technol. 9(1975)6, pp. 563-573.
17. Stone, J. E. and Scallan, A. M., The effect of component removal upon the porous structure of the cell wall. Part III. A comparison between the sulfite and kraft processes. Pulp and Paper Magazine of Canada 69(1968)6, pp. 69-74.
18. Stone, J. E. and Scallan, A. M., The effect of component removal upon the porous structure of the cell wall of wood. J. Polym. Sci. (C) (1965)11, pp. 13-25.
19. Suurnäki, A., Li, T-Q., Buchert, J., Tenkanen, M., Viikari, L., and Ödberg, L., Effects of Enzymatic removal of xylan and glucomannan on the pore size distribution of kraft fibers. Holzforschung 51(1997)1, pp. 27-33.
20. Alince, B. and van de Ven, T. G. M., Porosity of swollen pulp fibers evaluated by polymer adsorption. The Fundamentals of Papermaking Materials, Transactions of the 11th Fundamental Symposium Held at Cambridge, 1997, pp. 771-788.
21. Berthold, J., Water Adsorption and Uptake in the Fibre Cell Wall As Affected by Polar Groups and Structure. Doctoral Thesis, Royal Institute of Technology, Stockholm, 1996.
22. Selenius, P. and Lindström, M., Diffusion controlled kinetics of electrolyte transfer within the pulp fiber wall: estimation of the fiber wall pore structure. The Fundamentals of Papermaking Materials, Transactions of the 11th Fundamental Symposium Held at Cambridge, 1997, pp. 815-836.
23. Weise, U., Characterization and Mechanisms of Changes in Wood Pulp Fibres by Water Removal. Doctoral Thesis, Helsinki University of Technology, Espoo, Finland, 1997.
24. Dullien, F. A. L., Porous Media Fluid Transport and Pore Structure. Academic Press, New York, 1979.
25. Höpner, T, Jayme, G., and Ulrich, J. C., Bestimmung des wasserruckhaltevermögens (quellwertes) von zellstoffen. Papier 9(1955)19/20, pp. 476-482.
26. Scallan, A. M. and Carles, J. E., The correlation of water retention value with fiber saturation point. Svensk Papperstidn. 75(1972)17, pp. 699-703.
27. Gallegos, D. P. and Smith, D. M., A NMR technique for the analysis of pore structure: determination of continuous pore size distributions. J. Colloid Interface Sci. 122(1988)1, pp. 143-153.
28. Glaves, C. L. and Smith, D. M., Membrane pore structure analysis via NMR spin-lattice relaxation experiments. J. Membrane Sci. 46(1989)2+3, pp. 167-184.
29. Davis, P. J. and Smith, D. M., Using NMR spectroscopy to analyze the pore structure of coatings. Tappi J. 72(1989)5, pp. 85-89.
30. Whittall, K. P., Recovering compartment sizes from NMR relaxation data . J. Mag. Reson. 94(1991)3, pp. 486-492.
31. 2H NMR relaxation. Cellulose 5(1998)1, pp. 33-49.
32. Lindström, T., The concept and measurement of fiber swelling. Paper Structure and Properties. Edited by Bristow, J. A. and Kolseth, P., Marcel Dekker, New York, 1986, pp. 75-97.
33. Alince, B., Comments on the porosity of swollen pulp fibers analyzed by solute exclusion. Tappi J. 74(1991)11, pp. 200-202.
34. Maloney, T. C., Thermoporosimetry by isothermal step melting. ISWPC Pre-Symposium, Seoul, 1999, pp. 245-253.
35. Ström, G. and Kunnas, A., The effect of cationic polymers on the water retention value of various pulps. Nord. Pulp Pap. Res. J. 6(1991)1, pp. 13-19.
36. Moore, G. K., The characterisation of the factors affecting fiber flexibility and swelling using water retention values. Tappi Papermakers Conference, Chicago, 1988, pp. 214-228.
37. Jayme, G., Properties of wood celluloses. II. Determination and significance of water retention value. Tappi J. 41(1958)11, pp. 180A-183A.
38. Nanri. Y. and Uesaka, T., Dimensional stability of mechanical pulps-drying shrinkage and hydroexpansivity. Tappi J. 76(1993)6, pp. 62-66.
39. Law, K. N., Valade, J. L., and Yang, K. C., Fibre development in thermomechanical pulping: comparison between black spruce and jack pine. J. Pulp Pap. Sci. 24(1998)2, pp. 73-76.
40. Lebel, R. G., Nobleza, G C., and Paquet, R., Water retention value indicates machine runnability of pulp. Pulp Pap. Can. 80(1979)5, pp. T135-T140.
41. Abson, D. and Gilbert, R. D., Observations on water retention values. Tappi J. 63(1980)9, pp. 146-147.
42. Scallan, A. M. and Tigerström, A. C., Swelling and elasticity of the cell wall of pulp fibers. J. Pulp Pap. Sci. 18(1992)5, pp. J188-J193.
43. Luukko, K., Characterization and Properties of Mechanical Pulp Fines. Doctoral Thesis, Helsinki University of Technology, Espoo, Finland, 1999.
44. Abson, D., Observations on the centrifugal water retention test. Tappi Papermaker's Conference, Chicago, 1988, pp. 137-140.
45. Yiannos, P. N., Swellability of pulps determined by isopropanol retention. Tappi J. 48(1965)9, pp. 494-496.
46. Silvy, J., Sarret, G., and Jestin, F., Evaluation des fractions d'eau de rétention extra-fibres et intra-fibres dans la mesure du W.R.V. - application au Contrôle du Raffinage des pâtes à papier. EUCEPA Conference, Venice, Italy, 1964, pp. 169-185.
47. Yamauchi, T. and Hasegawa, A., Determination of PEG concentration in its aqueous solution using differential scanning calorimetry. J. Appl. Polym. Sci. 49(1993)9, pp. 1653-1658.
48. Galin, M. and Galin, J. C., Hydration of poly (pyridiumsulfonatopyl betaines). Makromol. Chem. 194(1993)pp. 3479-3491.
49. Nakamura, K., Hatakeyama, T., and Hatakeyama, H., DSC studies on monovalent and divalent cation salts of carboxymethylcellulose in highly concentrated aqueous solutions. Cellucon-86, Wood and Cellulosics, Wrexham, North Wales, 1986, pp. 97-103.
50. Galin, J. C. and Galin, M., Water sorption in poly (ammonium Sulfopropylbetaines). I. differential scanning calorimetry. J. Polym. Sci. (B: Polym. Phys.) 30(1992)10, pp. 1103-1111.
51. Galin, J. C. and Galin, M., Water sorption in poly (ammonium Sulfopropylbetaines). II. sorption isotherms. J. Polym. Sci. (B: Polym. Phys.) 30(1992)10, pp. 1113-1121.
52. Aoki, H. and Kodama, M., The behavior of water molecules in semi-crystalline bilayer structure of phosphatidylethanolamine. J. Therm. Anal. 49(1997)2, pp. 839-845.
53. Nagura, M., Saitoh, H., Gotoh, Y., and Ohkoshi, Y., States of water in poly(vinyl alcohol)/poly(sodium L-glutamate) blend hydrogels. Polymer 37(1996)25, pp. 5649-5652.
54. Kabeya, H., Effect of grinding on bound water in cellulosic materials. J. Jpn. Wood Res. Soc. 39(1993)11, pp. 1291-1297.
55. Hatakeyama, T., Nakamura, K., Tajima, T., and Hatakeyama, H., The effect of beating on the interaction between cellulose and water. International Paper Physics Conference, Quebec, 1987, pp. 87-91.
56. Hatakeyama, T. and Liu, Z., Handbook of Thermal Analysis. John Wiley & Sons, New York, 1998.
57. Yamauchi, T. and Murkami, K., Differential scanning calorimetry as an aid for investigating the wet state of pulp. J. Pulp Pap. Sci. 17(1991)6, pp. J223-J226.
58. Nakamura, K., Hatakeyama, T., and Hatakeyama, H., Studies on bound water of cellulose by differential scanning calorimetry. Journal of Textile Institute 72(1981)9, pp. 607-613.
59. Plouchly, J., Biros, J., and Benes, S., Makromol. Chem. Makromol. Chem. 180(1979)3, pp. 745-760.
60. Franks, F., Water a Comprehensive Treatise. Plenum Press, New York, 1978.
61. Deodhar, S. and Luner, P., Measurement of bound (nonfreezing) water by differential scanning calorimetry. Water in Polymers. Edited by Rowland, S. P., 1980, pp. 273-285.
62. Stapf, S., Kimmich, R., Seitter, R.-O., Maklakov, A. I., and Skirda, V. D., Proton and deuteron field cycling NMR relaxometry of liquids confined in porous glasses. Colloids Surf. 115(1996), pp. 107-114.
63. Hatakeyama, H., Nakamura, K., and Hatakeyama, T., DSC and NMR studies on the water-cellulosic polyelectrolyte systems. Tenth Cellulose Conference, Syracuse, New York, 1988, pp. 419-429.
64. Hatakeyama, H., Nakamura, K., and Hatakeyama, T., Structure and properties of the amorphous region of cellulose in the dry and wet states. International Paper Physics Conference, Quebec, 1987, pp. 101-105.
65. Bilinski, B. and Dawidowicz, A. L., Investigation of porous structure and surface properties of controlled porosity glasses. Colloids Surf. 118(1996)1-2, pp. 149-160.
66. Ishikiriyama, K. and Todoki, M., Pore size distribution (PSD) measurements of silica gels by means of differential scanning calorimetry II. Thermoporosimetry. J. Colloid Interface Sci. 171(1995)1, pp. 103-111.
67. Ishikiriyama, K. and Todoki, M., Evaluation of water in silica pores using differential scanning calorimetry. Thermochim. Acta 256(1995)28, pp. 213-226.
68. Ishikiriyama, K., Todoki, M., Min, K. H., Yonemori, S., and Noshiro, M., Thermoporosimetry - pore size distribution measurements for microporous glass using differential scanning calorimetry. J. Therm. Anal. 46(1996)3-4, pp. 1177-1189.
69. Gan, L. M., Liu, J., and Chew, C. H., Microporous polymeric composites from bicontinuous microemulsion polymerization using a polymerizable nonionic surfactant. Polymer 38(1997)1, pp. 5339-5345.
70. Jaroniec, M., Gadkaree, K. P., and Choma, J., Relation between adsorption potential distribution and pore volume distribution for microporous carbons. Colloids Surf. 118(1996)3, pp. 203-210.
71. Homshaw, L. G., Calorimetric determination of the porosity an pore size distribution PSD: effect of heat on porosity, pore form, and PSD in water-saturated polyacrylinitrile fibers. J. Colloid Interface Sci. 84(1981)7, pp. 127-140.
72. Rennie, G. K. and Clifford, J., Melting of ice in porous solids. J. Chem. Soc. Faraday 73(1977)4, pp. 680-689.
73. Ishikiriyama, K., Todoki, M., Kobayashi, T., and Tanzawa, H., Pore size distribution measurements of poly (methyl methacrylate) hydrogel membranes for artificial kidneys using differential scanning calorimetry. J. Colloid Interface Sci. 173(1995)2, pp. 419-428.
74. Jackson, C. L. and McKenna, G. B., The melting behavior of organic materials confined in porous solids. J. Chem. Phys. 93(1990)12, pp. 9002-9011.
75. Höhne, G., Hemminger, W., and Flammersheim, H.-J., Differential Scanning Calorimetry an Introduction for Practitioners. Springer, Berlin, 1996.
76. Favis, B. D. and Goring, D. A. I., A model for the leaching of lignin macromolecules from pulp fibres. J. Pulp Pap. Sci. 10(1984)5, pp. J139-J143.
77. Jayme, G., Mikro-Quellungsmessungen an Zellstoffen. Der Papier-Fabrikant/Wochenblatt fur Papierfabrikation 6(1944), pp. 187-194.
78. Kitayama, T., Okayama, T., and Oye, R., Changes of chemical pulp fibers during recycling. Symposium on Wood and Pulping Chemistry, Tsuka Science City, Japan, 1983, pp. 118-123.
79. Weise, U., Hornification mechanisms and terminology. Pap. Puu 80(1998)2, pp. 110-115.
80. Bawden, A. D. and Kibblewhite, R. P., Effects of multiple drying treatments on kraft fibre walls. J. Pulp Pap. Sci. 23(1997)7, pp. J340-J344.
81. Laivins, G. V. and Scallan, A. M., The mechanism of hornification of wood pulps. Products of Papermaking, Transactions of the 10th Fundamental Research Symposium Held at Oxford, 1993, pp. 1235-1260.
82. de Ruvo, A. and Htun, M., Fundamental and practical aspects of paper-making with recycled fibers . The Role of Fundamental Research in Paper-Making, Transactions of the Symposium Held at Cambridge, 1981, pp. 195-225.
83. Htun, M. and de Ruvo, A., The implication of fines fraction for the properties of bleached kraft sheet. Nord. Pulp Pap. Res. J. 81(1978)16, pp. 507-510.
84. Salmen, L., Tigerström, A., and Fellers, C., Fatigue of wood - characterization of mechanical defibration. J. Pulp Pap. Sci. 11(1985)3, pp. J68-J72.
85. Luukko, K. and Maloney, T. C., The swelling of mechanical pulp fines. Cellulose 6(1999)2, pp. 123-135.
86. Ehrnrooth, E. M. L., Softening and Mechanical Behavior of Single Wood Pulp Fibers - the Influence of Matrix Composition and Physical Characteristics. Doctoral Thesis, University of Helsinki, Finland, 1982.
87. Stone, J. E., Scallan, A. M., and Aberson, G. M. A., The wall density of native cellulose fibres. Pulp Pap. Can. 67(1966)5, pp. T263 - T268.
88. Campbell, W. B., A physical theory of the beating process. Pap. Trade J. 95(1932), pp. 29-33.
89. Rance, H. F., Effect of water removal on sheet properties, the water evaporation phase. Tappi J. 37(1954)12, pp. 640-654.
90. Nanko, H., Asano, S., and Ohsawa, J., Shrinkage behavior of pulp fibers during drying. International Paper Physics Conference, Kona, Hawaii, 1991, pp. 365-371.
91. Gibson, L. J., Cellular Solids: Structural Properties. Pergamon, Oxford, 1988.
92. Carlsson, G., Some Fundamental Aspects of the Wet Pressing of Paper. Doctoral Thesis, Royal Institute of Technology, Stockholm, 1983.
93. Busker, L. H. and Cronin, D. C., The relative importance of wet press variables in water removal. Pulp Pap. Can. 85(1984)6, pp. T138-T147.
94. Laivins, G. V. and Scallan, A. M., Removal of water from pulps by pressing - part 1: inter and intra wall water. Tappi Engineering Conference, Orlando, Florida, 1993, pp. 741-748.
95. Swerin, A., Ödberg, L., and Lindström, T., Deswelling of hardwood kraft fibers by cationic polymers. Nord. Pulp Pap. Res. J. 5(1990)4, pp. 188-196.
96. Szikla, Z. and Paulapuro, H., Wet pressing laboratory simulation. 2nd International Pira Conference on Modern Technologies in Pressing and Drying, Bournemouth, England, 1990, pp. 1-29.
97. Van Den Akker, J. A., Wink, W. A., and Bobb, F. C., Some experiments on the water cellulose fiber system. Tappi J. 42(1959)4, pp. 340-344.
98. Lee, P. and Hinds, J., Measurements of heat and mass transport within a sheet of papermaking fibres during drying. Drying' 80. Edited by Mujumdar, A., Hemisphere Publishing, New York, 1980, pp. 523-528.
99. Menon, A. and Mujumdar, A., Drying of solids: principles, classification and selection of dryers. Handbook of Industrial Drying. Edited by Mujumdar, A., Marcel Dekker, New York, 1987, pp. 3-46.
100. Lampinen, M. and Toivonen, K., Application of a thermodynamic theory to determine capillary pressure and other fundamental material properties affecting the drying process. Drying'84. Edited by Mujumdar, A., Hemisphere Publishing, New York, 1984, pp. 228-224.
101. Cowan, F., The mechanism of hot-surface drying. Tappi J. 47(1964)12, pp. 808-811.
102. Lee, P. and Hinds, J., Optimizing dryer performance. A technique for measuring the drying characteristics of fibre webs. Tappi J. 62(1979)4, 1979.
103. Göttsching L. and Rhodius, D., Der trocknungsverlauf von papier und pappe in abhängigkeit von trocknungstechnischen und papiertechnologischen parametern, Teil I: Übersicht und erläuterung der Versuchsmethodik zur konvektionstrocknung. Papier 31(1977)10, pp. 419-427.
104. Johansson, T., Development of Paper Properties in Drying and Methods to Characterise Evaporation Rate Curves. Licentiate Thesis, Helsinki University of Technology, Espoo, Finland, 1998.
105. Paltakari, J., Apparatus and Method for Determining Drying Parameters of Paper. Licentiate Thesis, Helsinki University of Technology, Espoo, Finland, 1995.
106. Stamm, A., Wood and Cellulose Science. The Ronald Press Company, New York, 1964.
107. Kirk, L. and Jones, G., Hot surface drying of paper. Pap. Technol. 11(1970)5, pp. 347-352.
108. Kobari, M., Shimizu, Y., Endo, M., and Inazumi, H., Contact drying of fibrous sheets. Third International Drying Symposium, England, 1982, pp. 483-493.