R-curve behavior and crack-closure stresses in barium titanate and (Mg, Y)-PSZ ceramics

Journal of the American Ceramic Society

Volumn 83, Issue 2, 2000, Pages 353-361

  Meschke, Frank ^a   Raddatz, Oliver ^a   Kolleck, Arnd ^a   Schneider, Gerold A ^a  

^a HAMBURG UNIVERSITY OF TECHNOLOGY   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

ATOMIC FORCE MICROSCOPY; BARIUM TITANATE; COMPRESSIVE STRESS; CRACK PROPAGATION; FRACTURE TOUGHNESS; RESIDUAL STRESSES; STRESS CONCENTRATION; ZIRCONIA;

COMPACT TENSION SPECIMENS; CRACK CLOSURE STRESSES; FERROELASTIC DOMAIN SWITCHING;

CERAMIC MATERIALS;

EID: 0033741081     PISSN: 00027820     EISSN: None     Source Type: Journal    
DOI: 10.1111/j.1151-2916.2000.tb01197.x     Document Type: Article

References (40)

1. D. B. Marshall and M. V. Swain, "Crack Resistance Curves in Magnesia-Partially-Stabilized Zirconia," J. Am. Ceram. Soc., 71 [6] 399-407 (1988).
2. 2-Containing Ceramics," J. Am. Ceram. Soc., 70 [10] 689-98 (1987).
3. C.-S. Yu and D. K. Shetty, "Transformation Zone Shapes, Size, and Crack-Growth-Resistance (R-Curve) Behavior of Ceria-Partially-Stabilized Zirconia Polycrystals," J. Am. Ceram. Soc., 72 [6] 921-28 (1989).
4. A. G. Evans, "Perspective on the Development of High-Toughness Ceramics," J. Am. Ceram. Soc., 73 [2] 187-206 (1990).
5. R. M. McMeeking and A. G. Evans, "Mechanics of Transformation-Toughening in Brittle Materials," J. Am. Ceram. Soc., 65 [5] 242-46 (1982).
6. B. Budiansky, J. Hutchinson, and J. C. Lambropulos, "Continuum Theory of Dilatant Transformation Toughening in Ceramics," Int. J. Solids Struct., 19, 337-55 (1983).
7. A. G. Evans and R. M. Cannon, "Toughening of Brittle Solids by Martensitic Transformations," Acta Metall, 34, 761-800 (1986).
8. J. C. Lambropoulos, "Shear, Shape and Orientation Effects in Transformation Toughening," Int. J. Solids Struct., 22 [10] 1083-106 (1986).
9. D. M. Slump and B. Budiansky, "Finite Cracks in Transformation-Toughened Ceramics," Acta Metall., 37 [12] 3297-304 (1989).
10. 3 due to Stress-Induced Ferroelastic Domain Switching," J. Eur. Ceram. Soc., 17, 1143-49 (1997).
11. T. L. Baker, K. T. Faber, and D. W. Readey, "Ferroelastic Toughening in Bismuth Vanadate," J. Am. Ceram. Soc., 74 [7] 1619-23 (1991).
12. R. F. Cook, B. R. Lawn, and C. J. Fairbanks, "Microstructure-Strength Properties in Ceramics, 1: Effect of Crack Size on Toughness." J. Am. Ceram. Soc., 68 [11] 604-15 (1985).
13. G. G. Pisarenko, V. M. Chushko, and S. P. Kovalev, "Anisotropy of Fracture Toughness of Piezoelectric Ceramics," J. Am. Ceram. Soc., 68 [5] 259-65 (1985).
14. 3," J. Am. Ceram. Soc., 61 [1-2] 72-75 (1978).
15. A. V. Virkar and R. L. K. Matsumoto, "Ferroelastic Domain Switching as a Toughening Mechanism in Tetragonal Zirconia," J. Am. Ceram. Soc., 69 [10] C-224-C-226 (1986).
16. T. Fett and D. Munz, "Evaluation of R-Curve Effects in Ceramics," J. Mater. Sci., 28, 742-52 (1993).
17. T. Fett, "Evaluation of the Bridging Relation from Crack-Opening-Displacement Measurements by Use of the Weight Function," J. Am. Ceram. Soc., 78 [4] 945-48 (1995).
18. J. Rödel, J. F. Kelly, and B. R. Lawn, "In Situ Measurements of Bridged Crack Interfaces in the Scanning Electron Microscope," J. Am. Ceram. Soc., 73 [11] 3313-18 (1990).
19. T. Fett, D. Munz, J. Seidel, M. Stech, and J. Rödel, "Correlation between Long and Short Crack R-curves in Alumina Using the Crack Opening Displacement and Fracture Mechanical Weight Function Approach," J. Am. Ceram. Soc., 79 [5] 1189-96 (1996).
20. G. Pezzotti, O. Sbaizero, V. Sergo, N. Muraki, K. Maruyama, and T. Nishida, "In Situ Measurements of Frictional Bridging Stresses in Alumina Using Fluorescence Spectroscopy," J. Am. Ceram. Soc., 81 [3] 738-40 (1998).
21. T. Fett, "Calculation of Phase Transformation Zones and Residual COD Fields in Transformation Toughened Zirconia"; pp. 127-40 in Fracture Mechanics of Ceramics, Vol. 11, R-Curve Behavior, Toughness Determination, and Thermal Shock. Edited by R. C. Bradt, D. P. H. Hasselmann, D. Munz, M. Sakai, and V. Ya. Shevchenko. Plenum Press, New York, 1996.
22. F. Meschke, P. Alves-Riccardo, G. A. Schneider, and N. Claussen, "Failure Behavior of Alumina and Alumina/Silicon Carbide Nanocomposites with Natural and Artificial Flaws," J. Mater. Res., 12 [12] 3307-15 (1997).
23. D. B. Marshall, M. C. Shaw, R. H. Dauskhardt, R. O. Ritchie, M. J. Readey, and A. H. Heuer, "Crack-Tip Transformation Zone in Toughened Zirconia," J. Am. Ceram. Soc., 73 [9] 2659-66 (1990).
24. M. S. Dadkhah, D. B. Marshal, W. L. Morris, and B. N. Cox, "Direct Measurement of Transformation Zone Strains in Toughened Zirconia," J. Am. Ceram. Soc., 74 [3] 584-92 (1991).
25. Ch.-S. Yu and D. K. Shetty, "Transformation Zone Shape, Size, and Crack-Growth Resistance (R-Curve) Behavior of Ceria-Partially-Stabilized Zirconia Polycrystals," J. Am. Ceram. Soc., 72 [6] 921-28 (1989).
26. M. Göken, M. Maβmann, F. Thome, and H. Vehoff, "Microscopic Fracture Behavior of Single Crystalline Intermetallics"; presented at the 2nd International Symposium on Structural Intermetallics (ISSI-2), Seven Springs, PA, Sept. 21-26, 1997.
27. M. Göken, H. Vehoff, and P. Neumann, "Atomic Force Microscopy Investigations of Loaded Crack Tips in NiAl," J. Vac. Sci. Technol., B14 [2] 1157-61 (1996).
28. F. Meschke, N. Claussen, G. De Portu, and J. Rödel, "Phase Stability of Fine-Grained (Mg,Y)-PSZ Ceramics," J. Am. Ceram. Soc., 78 [7] 1997-99 (1995).
29. F. Meschke, M. Hoffmann, and J. Rödel, "Interrelation between Transformability, R-Curve Behavior and Fracture Strength of (Mg,Y)-PSZ"; pp. 161-68 in Fourth Euro Ceramics, Vol. 3. Edited by S. Meriani and V. Sergo, Faenza Editrice Iberica S.L., San Vicente, Spain, 1996.
30. "Standard Test Method for Plane-Strain Fracture Toughness of Metallic Materials," ASTM Designation E 399-83, pp. 680-715 in 1987 ASTM Annual Book of Standards, Vol. 3.01. American Society for Testing and Materials, Philadelphia, PA, 1987.
31. B. Lawn, Fracture of Brittle Solids. Cambridge University Press, Cambridge, U.K., 1993.
32. T. Fett, "Evaluation of the Bridging Relation from Crack-Opening-Displacement Measurements by Use of the Weight Function," J. Am. Ceram. Soc., 78 [4] 945-48 (1995).
33. H. Bückner, "A Novel Principle for the Computation of Stress Intensity Factors," Z. Angew. Math. Phys., 50, 529-46 (1970).
34. J. R. Rice, "Some Remarks on Elastic Crack-Tip Stress Fields," Int. J. Solids Struct., 8, 751-58 (1972).
35. H. Tada, P. C. Paris, and G. R. Irwin. The Stress Analysis of Cracks Handbook. Del Research Corporation, Hellertown, PA, 1973.
36. X. Wu and A. J. Carlsson, Weight Functions and Stress Intensity Factor Solutions. Pergamon Press, New York, 1991.
37. T. Fett and D. Munz, Stress Intensity Factors and Weight Functions. Computational Mechanics Publications, Southampton, U.K., 1997.
38. R. C. Pohanka, S. W. Freiman, K. Okazaki, and S. Tashiro, "Fracture of Piezoelectric Materials"; pp. 353-64 in Fracture Mechanics of Ceramics, Vol. 5, Surface Flaws, Statistics, and Microcracking. Edited by R. C. Bradt, A. G. Evans, D. P. H. Hasselmann, and F. F. Lange. Plenum Press, New York, 1983.
39. 2," J. Am. Ceram. Soc., 64 [3] 215 (1986).
40. T. Fett, "Computation of Residual Stress Intensity Factors for Non-propagated Cracks with Phase-Transformation Zones in Finite Bodies," Eng. Fract. Mech., 56 [3] 397-408 (1997).