Sensor placement study for online flow monitoring in liquid composite molding

Polymer Composites

Volumn 21, Issue 3, 2000, Pages 436-449

  Kueh, Sylvia R M ^a   Advani, Suresh G ^a   Parnas, Richard S ^b  

^a UNIVERSITY OF DELAWARE   (United States)

^b NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER SIMULATION; CURING; FIBER OPTIC SENSORS; ONLINE SYSTEMS;

LIQUID COMPOSITE MOLDING (LCM); ONLINE FLOW MONITORING;

PLASTICS MOLDING;

EID: 0033705655     PISSN: 02728397     EISSN: None     Source Type: Journal    
DOI: 10.1002/pc.10200     Document Type: Article

References (48)

1. S. G. Advani, M. V. Bruschke, and R. S. Parnas, in Flow and Rheology in Polymer Composites Manufacturing; S. G. Advani, ed., Elsevier Applied Science Publishers, New York (1994).
2. C. Binetruy, B. Hilaire, and J. Pabiot, Automated Compos., Sept. (1995).
3. Y.-T. Chen, H. T. Davis, and C. W. Macosko, AIChE J., 41, 2261 (1995).
4. A. Kikuchi, E. Higuerey, and J. Coulter, Trans. ASME J. Eng. Mater. Technol., 117, 89 (1995).
5. S. M. Milkovich, State-of-the-Art Review on the Use of Sensors and Controls as it Relates to Resin Transfer Molding (RTM) of Composite Materials, MTIAC SOAR-98-01 (1998).
6. N. Patel, V. Rohatgi, and L. J. Lee, Polym. Compos., 14, 161 (1993).
7. S. H. Ahn, W. I. Lee, and G. S. Springer, J. of Compos. Mater., 29, 714 (1995).
8. S. Bickerton, H. Stadfeld, K. V. Steiner, and S. G. Advani, Proc. 13th ASC Techn. Conf. Compos. Mater., 232 (1998).
9. M. V. Bruschke and S. G. Advani, Polym. Compos., 11, 398 (1990).
10. B. K. Fink, S. M. Walsh, D. C. DeSchepper, J. W. Gillespie Jr., R. L. McCullough, R. C. Don, and B. J. Waibel, Proc. 1995 ASME MD Inter. Mechanical Eng. Congress and Exposition, 69, 999 (1995).
11. D. A. Klosterman and T. E. Saliba, 38th Inter. SAMPE Symp., 38, 1322 (1993).
12. D. E. Kranbuehl, P. Kingsley, S. Hart, G. Hasko, B. Dexter, and A. C. Loos, Polym. Compos., 15, 299 (1994).
13. R. E. Lyon, K. E. Chike, and S. M. Angel, J. Appl. Polym. Sci. 53, 1805 (1994).
14. N. Patel, V. Rohatgi, and L. J. Lee, Polym. Compos., 14, 161 (1993).
15. R. S. Parnas and F. R. Phelan, Jr., 36th Inter. SAMPE Symp., 506 (1991).
16. F. R. Phelan, Jr., Proc. 7th ASC Techn. Conf., 90 (1992).
17. T. Sadiq, R. Parnas, and S. G. Advani, 24th Inter. SAMPE Techn. Conf., 24, T660 (1992).
18. A. D. Schwab, R. L. Levy, and G. G. Glover, Polym. Compos., 17, 312 (1996).
19. D. L. Woerdeman, K. M. Flynn, J. P. Dunkers, and R. S. Parnas, J. Reinforced Plast. Compos., 15, 922 (1996).
20. R. J. Young, J. Microscopy, 185, 199 (1997).
21. A. A. Skordos, P. I. Karkanas, and I. K. Partridge, Novel Dielectric Sensor Setup for Flow and Cure Monitoring in Resin Transfer Molding, Proceedings of the 12th International Conference on Composite Materials (1999).
22. Z. Cai and D. J. Lawrie, 24th Inter. SAMPE Techn. Conf., T675 (1992).
23. Y. M. Ismail and G. S. Springer, J. Compos. Mater., 31, 954 (1997).
24. P. Simacek, E. M. Sozer, and S. G. Advani, User Manual for Drape 1.1 and LIMS 4.0; CCM Report 98-101.
25. F. Trochu, R. Gauvin, D. M. Gao, and J. Boudreault, J. Reinforced Plast. Compos., 13, 262 (1994).
26. C.-J. Wu and L.-W. Huorng, Polym. Eng. Sci., 35, 1272 (1995).
27. J. R. Bernstein and J. W. Wagner, Rev. Scientific Instrumentation, 68, 2156 (1997).
28. J. P. Dunkers, K. M. Flynn, and M. T. Huang, Proc SPE ANTEC '97, 2451 (1997).
29. Y. M. Liu, C. Ganesh, J. P. H. Steele, and J. E. Jones, J. Compos. Mater., 3, 87 (1997).
30. R. A. Neff, D. L. Woerdeman, and R. S. Parnas, Polym. Compos., 18, 518 (1997).
31. F. W. Wang and B. M. Fanconi, In-situ Characterization of the Interface of Glass Reinforced Composites, U.S. Army Research Office (1987).
32. D. L. Woerdeman and R. S. Parnas, Plast. Eng., October 1995, p. 25.
33. D. L. Woerdeman and R. S. Parnas, Proc. SPE ANTEC '95; II, 2805 (1995).
34. D. L. Woerdeman, J. L. Spoerre, K. M. Flynn, and R. S. Parnas, Polym. Compos., 18, 133 (1997).
35. D. L. Woerdeman, K. M. Flynn, and R. S. Parnas, Automated Composites, Sept. (1995).
36. D. L. Woerdeman, Characterization of the Liquid Molding Process of Composite Manufacturing, PhD. Thesis, John Hopkins University (1996).
37. G. G. Guilbalt, Practical Fluorescence: Theory, Methods and Techniques, 2nd Edition, Marcel Dekker Inc., New York (1990).
38. N. J. Harrick, Internal Reflection Spectroscopy, Harrick Scientific Corporation, New York (1987).
39. J. Hecht, Understanding Fiber Optics, Second Edition; Sams Publishing (1993).
40. D. A. Krohn, Fiber Optic Sensors: Fundamentals and Application, 2nd Edition, Instrument Society of America, Research Triangle Park, NC (1992).
41. J. R Lakowicz, Z. Gryczynski, and I. Gryczynski, Photochemistry and Photobiology, 64, 5635 (1995).
42. D. Marcuse, The Bell System Technical Journal, 55, 1463 (1976).
43. A. Messica, A. Greenstein, and A. Katzir, Appl. Optics, 35, 2274 (1996).
44. O. S. Wolfbeis, Fiber Optic Chemical Sensors and Biosensor, VoL 1; CRC Press Inc., Boca Raton, FL (1991).
45. C. Egami, K. Takeda, M. Isai, and M. Ogita, Optics Communications, 122, 122 (1996).
46. V. Ruddy, B. D. MacCraith, and J. A. Murphy, J. Appl. Phys., 67, 376 (1996).
47. J. D. Andrade, R. A. van Wagenen, D. E. Gregonis, K. Newby, and J. N. Lin, IEEE Trans. Electron Devices, ED-132, 1175 (1985).
48. E. F. Carome, G. A. Coghlan, C. N. Sukenik, and J. E. Zull, Sensors and Actuators, B, 13-14, 732 (1993).