On-line stator and rotor resistance estimation for induction motors

IEEE Transactions on Control Systems Technology

Volumn 8, Issue 3, 2000, Pages 570-579

  Marino, Riccardo ^a   Peresada, Sergei ^b   Tomei, Patrizio ^a  

^a UNIVERSITY OF ROME TOR VERGATA   (Italy)

^b NATIONAL TECHNICAL UNIVERSITY OF UKRAINE   (Ukraine)

Author keywords

[No Author keywords available]

Indexed keywords

ALGORITHMS; ELECTRIC CURRENT MEASUREMENT; ELECTRIC EXCITATION; ELECTRIC RESISTANCE; INDUCTION MOTORS; MAGNETIC FLUX; MATHEMATICAL MODELS; OBSERVABILITY; PARAMETER ESTIMATION; ROTORS (WINDINGS); STATORS; VOLTAGE MEASUREMENT;

ADAPTIVE OBSERVERS; FLUX OBSERVERS; ROTOR SPEED;

CONTROL SYSTEM SYNTHESIS;

EID: 0033685258     PISSN: 10636536     EISSN: None     Source Type: Journal    
DOI: 10.1109/87.845888     Document Type: Article

References (34)

1. W. Leonhard, "Microcomputer control of high dynamic performance ac-drives - A survey," Automatica, vol. 22, pp. 1-19, 1986.
2. Y. Hori, V. Cotter, and Y. Kaya, "A novel induction machine flux observer and its application to a high performance ac drive system," in 10th IFAC World Congr., Munich, Germany, 1987, pp. 363-368.
3. Y. Hori and T. Umeno, "Flux observer-based field orientation FOFO controller for high performance torque control," in IPEC, Tokyo, Japan, 1990, pp. 1219-1226.
4. D. I. Kim, I. J. Ha, and M. S. Ko, "Control of induction motors via feedback linearization with input-output decoupling," Int. J. Contr., vol. 51, pp. 863-883, 1990.
5. J. Holtz and T. Thimm, "Identification of the machine parameters in a vector-controlled induction motor drive," IEEE Trans. Ind. Applicat., vol. 27, pp. 1111-1118, 1991.
6. R. Marino and P. Valigi, "Nonlinear control of induction motors: A simulation study," in European Contr. Conf., Grenoble, France, 1991, pp. 1057-1062.
7. X. Roboam, C. Andrieux, B. de Fornel, and J. Hapiot, "Rotor flux observation and control in squirrel-cage induction motor: Reliability with respect to parameters variations," Proc. Inst. Elect. Eng., pt. D, vol. 139, pp. 363-370, 1992.
8. R. Marino, S. Peresada, and P. Valigi, "Adaptive input-output linearizing control of induction motors," IEEE Trans. Automat. Contr., vol. 38, pp. 208-221, 1993.
9. W. Leonhard, Control of Electrical Drives, 2nd ed. Berlin, Germany: Springer-Verlag, 1996.
10. R. Marino, S. Peresada, and P. Tomei, "Output feedback control of current-fed induction motors with unknown rotor resistance," IEEE Trans. Contr. Syst. Technol., vol. 4, pp. 336-347, 1996.
11. Y. Dote, "Stabilization of controlled current induction motor drive system via new nonlinear state observers," IEEE Trans. Ind. Electron., vol. 27, pp. 77-81, 1980.
12. A. Bellini, G. Figalli, and G. Ulivi, "Analysis and design of a microcomputer-based observer for an induction machine," Automatica, vol. 24, pp. 549-555, 1988.
13. G. C. Verghese and S. R. Sanders, "Observers for flux estimation in induction machines," IEEE Trans. Ind. Electron., vol. 35, pp. 85-94, 1988.
14. L. J. Garces, "Parameter adaptation for the speed-controlled static AC drive with a squirrel-cage induction motor," IEEE Trans. Ind. Applicat., vol. 16, pp. 173-178, 1980.
15. R. Gabriel and W. Leonhard, "Microprocessor control of induction motor," in Power Electron. Conf. IPEC, Orlando, FL, 1982, pp. 385-396.
16. W. Schumaker and W. Leonhard, "AC-servo drive with microprocessor control," in Power Electron. Conf. IPEC, Tokyo, Japan, 1983, pp. 1465-1476.
17. T. Matsuo and T. A. Lipo, "A rotor parameter identification scheme for vector controlled induction motor drives," IEEE Trans. Ind. Applicat., vol. 21, pp. 624-632, 1985.
18. L. C. Zai and T. A. Lipo, "An extended Kalman filter approach in rotor time constant measurement in PWM induction motor drives," in IEEE Ind. Applicat. Soc. Annu. Meet., Atlanta, GA, 1987, pp. 177-183.
19. R. D. Lorenz and D. B. Lawson, "A simplified approach to continuous, on-line tuning of field oriented induction machine drives," in IEEE Ind. Applicat. Soc. Annu. Meet., Pittsburgh, PA, 1988, pp. 444-449.
20. S. K. Sul, "A novel technique of rotor resistance estimation considering variation of mutual inductance," IEEE Trans. Ind. Applicat., vol. 25, pp. 578-587, 1989.
21. C. C. Chang and H. Wang, "An efficient method for rotor resistance identification for high-performance induction motor vector control," IEEE Trans. Ind. Electron., vol. 37, pp. 477-482, 1990.
22. D. Atkinson, P. Acarnley, and J. Finch, "Observers for induction motor state and parameter estimation," IEEE Trans. Ind. Applicat., vol. 27, pp. 1119-1127, 1991.
23. D. I. Kim, I. J. Ha, and M. S. Ko, "Control of induction motors for both high dynamic performance and high power efficiency," Proc. Inst. Elect. Eng., pt. D, vol. 139, pp. 363-370, 1992.
24. R. Marino, S. Peresada, and P. Tomei, "Exponentially convergent rotor resistance estimation for induction motors," IEEE Trans. Ind. Electron., vol. 42, pp. 508-515, 1995.
25. J. Stephan, M. Bodson, and J. Chiasson, "Real-time estimation of the parameters and fluxes of induction motors," IEEE Trans. Ind. Applicat., vol. 30, pp. 746-759, 1994.
26. R. Marino, S. Peresada, and P. Tomei, "Global adaptive output feedback control of induction motors with uncertain rotor resistance," in IEEE 35th Conf. Decision Contr., Kobe, Japan, 1996, pp. 4701-4706.
27. T. von Raumer, J. M. Dion, and L. Dugard, "Adaptive nonlinear speed control of induction motors," Int. J. Adaptive Contr. Signal Processing, vol. 7, pp. 435-455, 1993.
28. A. D. Ndoudi-Likoho, S. I. Seleme, and C. Canudas-de-Wit, "Full adaptive control of induction motor drives," in Europ. Contr. Conf., Groningen, The Netherlands, 1993, pp. 597-602.
29. P. Vedagarbha, D. Dawson, W. Rhodes, and T. Burg, "Nonlinear control of induction motors: The observed field oriented control scheme," in IEEE 35th Conf. Decision Contr., Kobe, Japan, 1996, pp. 4707-4712.
30. H. K. Khalil and E. Strangas, "Robust speed control of induction motors using position and current measurements," IEEE Trans. Automat. Contr., vol. 41, pp. 1216-1220, 1996.
31. H. Kubota and K. Matsuse, "Adaptive flux observer of induction motor and its stability,"Elect. Eng. Japan, vol. 111, pp. 97-104, 1991.
32. A. E. Fitzgerald, C. Kingsly, and S. D. Umans, Electric Machinery. New York: McGraw-Hill, 1983.
33. P. C. Krause, Analysis of Electric Machinery. New York: McGraw-Hill, 1986.
34. R. Marino and P. Tomei, Nonlinear Control Design - Geometric, Adaptive and Robust. Englewood Cliffs, NJ: Prentice-Hall, 1995.