Collapse of UOE manufactured steel pipes

Proceedings of the International Offshore and Polar Engineering Conference

Volumn 3, Issue , 2000, Pages 170-181

  Gresnigt, A M ^a   Van Foeken, R J ^b   Chen, Shilin ^c  

^a DELFT UNIVERSITY OF TECHNOLOGY   (Netherlands)

^b TNO   (Netherlands)

^c CSC (Canada)   (Canada)

Author keywords

Collapse; Design formula; FEA; Pipe; Tests; UOE

Indexed keywords

BENDING MOMENTS; BUCKLING; CODES (STANDARDS); FAILURE ANALYSIS; FINITE ELEMENT METHOD; MATHEMATICAL MODELS; PRESSURE EFFECTS; PROBABILITY;

BAUSCHINGER EFFECT; EXTERNAL PRESSURE; FOUR POINT BENDING TEST; SEAMLESS PIPE;

STEEL PIPE;

EID: 0033676978     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (29)

1. Bai, Y, Igland, R. and Moan, T. (1993), Tube collapse under combined pressure, tension and bending loads, Int. J. Offshore and Polar Engineering, IJOPE, Vol. 3, no. 2, 1993.
2. Corona, E. and Kyriakides, S. (1988), On the collapse of inelastic tubes under combined bending and pressure, Int. J. Solids and Structures, Vol. 24, 1988, pp 505-535.
3. DNV'96 (1996), Rules for submarine pipeline systems, Det Norske Veritas.
4. Foeken, R.J. van, and Gresnigt A.M. (1998), Buckling and collapse of UOE manufactured steel pipes. Report prepared for the Offshore and Onshore Design Applications Supervisory Committee of PRC International at the American Gas Association, Arlington. TNO report 96-CON-R0500.
5. Fowler, J.R. (1990), Recommended design procedures for offshore pipelines. Seminar Proceedings COLLAPSE OF OFFSHORE PIPELINES, February 20, 1990, AGA Catalogue No. L51646.
6. Fowler, J.R., Hormberg, B., Katsounas, A. (1990), Large scale collapse testing, Stress Engineering Services. Report prepared for the Pipeline Research Committee of the American Gas Association, August, 1990.
7. Gresnigt, A.M. (1986), Plastic design of buried steel pipelines in settlement areas, HERON, Vol. 31, 1986, no. 4.
8. Hirakawa, K., Tokimasa, K. and Tanaka, K. (1982), Effect of L/D on the collapsing pressure of seamless steel tubes for oil well casing under external pressure. The Sumitomo Search, No. 27, December 1982.
9. Kyriakides, S., Corona, E., Babcock, C.D. and Madhavan, R. (1985), Factors affecting pipe collapse, The University of Texas at Austin. Report prepared for the Pipeline Research Committee of the American Gas Association, August, 1985.
10. Kyriakides, S., Corona, E., Babcock, C.D. and Madhavan, R. (1987), Factors affecting pipe collapse Phase II, The University of Texas at Austin. Report prepared for the Pipeline Research Committee of the American Gas Association, August, 1987.
11. Kyriakides, S., Corona, E. (1991), On the effect of the UOE manufacturing process on the collapse pressure of long tubes, Offshore Technology Conference, OTC 6758.
12. Langner, C.G. (1990), History and review of collapse, Seminar Proceedings COLLAPSE OF OFFSHORE PIPELINES, February 20, 1990, AGA Catalogue No. L51646.
13. Langner, C.G. (1984), Design of Deepwater Pipelines, TNO-IWECO 30th Anniversary Symposium on Underwater Technology, The Hague, The Netherlands, 24th May 1984.
14. Lomeier, A., Small, N.C., Borin, H.J. and Connet, B. (1973), Collapse of ductile heat exchanger tubes with ovality under external pressure, Proceedings 2nd Int. Conference on Structural Mechanics in Reactor Technology, Berlin, September 1973.
15. Murphey, C.E. (1975), Ultimate pipe strength under bending, collapse and fatigue, Report 21-1, Shell Development Company, Deepwater Pipeline Feasibility Study, April 1975.
16. Nippon Steel Corporation (19??), Evaluation of the collapse strength with axial force for commercial casing.
17. Small, N.C. (1977), Plastic collapse of oval straight tubes under external pressure, Energy Technology Conference and Exhibit, Houston, Texas, September 18-22, 1977.
18. Stark, P.R. and Mc.Keehan, D.S. (1995), Hydrostatic collapse research in support of the Oman India Gas Pipeline. OTC paper 7705.
19. SUPERB, (1997), presentation of the project in several papers during the 1997 OMAE conference, i.e: Mork, K.J., Spiten, J., Torselletti, E., Ness, O.B. and Verley, R, The SUPERB project & DNV'96: Buckling and collapse limit state.
20. Jiao, G., Mork, K.J., Bruschi, R., and Sotberg, T., The SUPERB project: Reliability based design procedures and limit state design criteria for offshore pipelines.
21. Sotberg, T., Moan, T., Bruschi, R., Jiao, G. and Mork, K.J., The SUPERB project: Recommended target safety levels for limit state based design of offshore pipelines.
22. Collberg, L., Mork, K.J. and Bjornsen, T. DNV'96: Application of a limit state based design.
23. Tamano, et al (Nippon Steel) (1983), A new empirical formula for collapse resistance of commercial casing, ASME, Proceedings 2nd Int. Offshore Mechanics and Arctic Engineering Symposium, Houston pp 489-495, February 1983.
24. Timoshenko, S.P. (1961), Working stress for columns and thin walled structures (Tubes with External pressure), ASME, Journal Applied Mechanics, Vol. 1 1933 or Timoshenko, S.P., Gere, J.M., Theory of Elastic Stability, McGraw-Hill Book Company, pp. 287-297.
25. Vrouwenvelder, A.C.W.M. (1984), Statistische gegevens ten behoeve van het project Veiligheid van Bouwconstructies, (Statistical data for the project Safety of Building Structures) TNO-Building and Construction Research Report BI-84-4, (in Dutch language).
26. Vrouwenvelder, A.C.W.M., et al (1991), Reliability analysis for offshore structures, ECOR Document.
27. Winter, P.E. de, Stark, J.W.B., Witteveen, J. (1985), Collapse behaviour of submarine pipelines. Chapter 7 of Shell Structures, Stability and Strength. Edited by R. Narayanan, Elsevier, 1985.
28. Winter, P.E. de (1985), Strength and deformation properties of pipelines in deep water, Final report of the third stage of MATS project PL-III-8, TNO-IBBC report B-85-459, October 1985.
29. Yeh, M.K., Kyriakides, S. (1988), Collapse of deepwater pipelines, Journal of Energy Resources Technology, Transactions of the ASME, Vol. 110, pp 1-11.