The influence of quenchant agitation on the heat transfer coefficient and residual stress development in the quenching of steels

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

Volumn 214, Issue 7, 2000, Pages 555-567

  Sedighi, M ^a   McMahon, C A ^a  

^a UNIVERSITY OF BRISTOL   (United Kingdom)

Author keywords

Boiling heat transfer; Heat transfer coefficient; Quenchant agitation; Quenching; Residual stress

Indexed keywords

BOILING LIQUIDS; FINITE ELEMENT METHOD; HEAT TRANSFER COEFFICIENTS; PHASE TRANSITIONS; QUENCHING; RESIDUAL STRESSES; STRESS ANALYSIS; THERMAL STRESS; X RAY DIFFRACTION ANALYSIS;

AXIAL STRESS;

STEEL HEAT TREATMENT;

EID: 0033671884     PISSN: 09544054     EISSN: None     Source Type: Journal    
DOI: 10.1243/0954405001518251     Document Type: Article

References (47)

1. Beitz, W. and Kuttner, K. H. (Eds) Dubbel Handbook of Mechanical Engineering, 1994 (Springer-Verlag, London).
2. Buhler, H. and Schulz, E. H. Eigenspannungen bei der Warmebehhandlung von Stahl. Arch. Eisenhüttenwesen, 1932, 5, 413.
3. Bashun, T. V., Vasil'eva, L. A., Urban, T. P. and Shterenzou, A. M. Distribution of residual stress in alloy Ak4-1 drop forgings. J. Metal Sci. Heat Treatment, 1986, 30, 117-119.
4. Schajer, G. S. Measurement of non-uniform residual stress using the hole-drilling method. Parts I and II. Trans. ASME, J. Engng Mater. Technol., 1988, 110, 338-349.
5. Vomacka, P. and Walburger, D. Shot peening of case hardening steel: effect of tempering temperature, hard-machining and shot peening on induced residual stresses. In Proceedings of the Fifth International Conference on Residual Stresses (ICRS-5), Linköping, Sweden, 16-18 June 1997, 1998 (Institute of Technology, Linköping University, Linköping).
6. Zhu, W. Measurement and assessment of residual stresses for probabilistic fatigue life predictions. PhD thesis, Department of Mechanical Engineering, University of Bristol, 1996.
7. Niku-Lari, A., Lu, J. and Flavenot, D. Measurement of residual stress distribution by the incremental hole-drilling method. Adv. Surf. Treatment, 1987, 4, 199-219.
8. Prevery, P. S. X-ray diffraction residual stress technique, material characterisation. In Metals Handbook, Vol. 10, 9th edition, 1986, pp. 380-392 (American Society for Metals, Metals Park, Ohio).
9. Landau, H. G. and Weiner, J. H. Transient and residual stresses in heat treated plates. J. Appl. Mechanics, 1958, 25, 459-465.
10. Weiner, J. H. and Huddleston, J. V. Transient and residual stresses in heat treated cylinders. J. Appl. Mechanics, 1959, 26, 31-39.
11. Inouc, T. and Tanaka, K. An elastic-plastic stress analysis of quenching when considering a transformation. Int. J. Solids Structs, 1975, 17, 361-367.
12. Inoue, T. and Raniecki, B. Determination of thermal-hard-ening stress in steels by using thermo-plasticity theory. J. Mechanics Physics Solids, 1978, 26, 187-193.
13. Hildenwall, B. Prediction of the residual stresses created during quenching. Dissertation 39, Linköping University, Sweden, 1979.
14. Sjöstrom, S. The calculation of quench stresses in steel. Dissertation 84, Linköping University, Sweden, 1982.
15. Sjöstrom, S. Interaction and constitutive models for the calculation of quench stresses in steel. In Proceedings of the International Symposium on The Calculation of Internal Stresses in Heat Treatment, Sweden, 1985, Vol. 1, pp. 220-246.
16. Fernandas, F. M. B., Denis, S. and Simon, A. Mathematical model coupling phase transformation and temperature evolution during quenching of steels. In Proceedings of the International Symposium on The Calculation of Internal Stresses in Heat Treatment, 1984, pp. 275-297.
17. Scheil, E. Nucleation period of austenite transformation. Arch. Eisenhüttenwesen, 1935, 12, 565-567.
18. Denis, S., Sjöstrom, S. and Simon, A. Coupled temperature, stress, phase transformation calculation model numerical illustration of internal stresses evolution during cooling of a eutectoid carbon steel cylinder. Metall. Trans. A, 1987, 18, 1203-1212.
19. Inoue, T., Ju, D.-Y. and Arimoto, K. Metallo-thermomechanical simulation of quenching process: theory and implementation of computer code 'HEARTS'. In Proceedings of the First International Conference on Quenching and Control of Distortion, Chicago, Illinois, 1992, pp. 205-212.
20. Thuvander, A. Calculation of distortion during quenching of a case hardening steel. Project report, Swedish Institute for Metals Research, Stockholm, 1990.
21. Das, S., Upadhya, G. and Chanadra, U. Prediction of macro and micro residual stress in quenching using phase transformation kinetics. In Proceedings of the First International Conference on Quenching and Control of Distortion, Chicago, Illinois, 1992, pp. 229-234.
22. Segerberg, S. and Bodin, J. Variation of the heat transfer coefficient around components of different shapes during quenching. In Proceedings of the First International Conference on Quenching and Control of Distortion, Chicago, Illinois, 1992, pp. 165-170.
23. Ramakrishnan, R. I. Quenching analysis of aerospace components using FEM. In Proceedings of the First International Conference on Quenching and Control of Distortion, Chicago, Illinois, 1992, pp. 235-242.
24. Ehlers, M., Muller, H. and Lohe, D. Simulation of stresses and residual stresses due to immersion cooling of tempering steel. In Proceedings of the Fifth International Conference on Residual Stresses (ICRS-5), Linköping, Sweden, 16-18 June 1997, 1998, Vol. 1, pp. 400-405 (Institute of Technology, Linköping University, Linköping).
25. Inoue, T., Nagaki, S., Kishino, T. and Monakwa, M. Description of transformation kinetics, heat conduction and elastic-plastic stress in the course of quenching and tempering of some steels. Ing.-Arch., 1982, 50, 315-325.
26. Inoue, T. and Wang, Z. Coupling phenomena between stress, temperature and metallic structures in the process of phase transformation. In Proceedings of the International Symposium on The Calculation of Internal Stresses in Heat Treatment, 1984, pp. 298-310.
27. Fischer, F. D. Simplified calculation of temperature field in heat treated cylinder using temperature measured at one point. J. Mater. Sci. Technol., 1992, 8, 468-473.
28. HEARTS, Theoretical Manual, Heat Treatment Simulation Program (Version 2.1), 1994 (CRC Research Institute, Chuo-Ku, Japan).
29. Bourdouxhe, M., Denis, S. and Simon, A. Computation of phase changes and deformations in long products undergoing thermal treatments. In Proceedings of the Third International Conference on Residual Stresses (ICRS-3), 1992, pp. 202-207.
30. Koistinen, D. P. and Marburger, M. Acta Metall., 1959, 7, 59-67.
31. Thuvander, A. and Melander, A. Calculation of distortion during quenching of a low alloy steel. Mater. Sci. Forum, 1992, 102-104, 767-782.
32. Denis, S., Guitier, E., Simon, A. and Beck, G. Stress phase transformation interactions, basic principles, modelization and their role in the calculation of internal stresses. J. Mater. Sci. Technol., 1985, 1, 805-813.
33. ANSYS Analysis Manual, 1996 (Finite Element Software, ANSYS Inc., Houston, Texas).
34. ANSYS Element Manual, 1996 (Finite Element Software, ANSYS Inc., Houston, Texas).
35. Sedighi, M. and McMahon, C. A. Modelling transformation behaviour and its effects on residual stress in a finite element system. In Proceedings of the Third International Conference on Modern Practice in Stress and Vibration Analysis, Dublin, Ireland, 1997, pp. 161-168 (Institute of Physics, Bristol).
36. Sedighi, M. Modelling the influence of manufacturing parameters on variation of residual stresses in quenched parts. PhD thesis, Department of Mechanical Engineering, University of Bristol, 1998.
37. Majorek, A., Scholtes, B., Muller, H. and Machcrauch, E. The influence of heat transfer coefficient on the development of stresses, residual stresses and distortions in martensitically hardened SAE 1045 and SAE 4140. In Proceedings of the First International Conference on Quenching and Control of Distortion, Chicago, Illinois, 1992, pp. 171-179.
38. Houghton, P. S. Heat Treatment of Metals for Manufacturing Processes and Services, Vol. 2, 1960 (Machinery Publishing Company, London).
39. Hernandes-Morales, B., Brimacombe, J. K., Hawbolt, E. B. and Gupta, S. M. Determination of quench heat-transfer coefficient using inverse techniques. In Proceedings of the First International Conference on Quenching and Control of Distortion, Chicago, Illinois, 1992, pp. 155-164.
40. Quenchmaster, An Integrated System for Quench Media Testing, 1994 (Drayton MacDhui Probes Limited, Stoke-on-Trent).
41. Davis, J. R. (Ed.) Metals Handbook, 1984 (American Society for Metals, Metals Park, Ohio).
42. Holman, J. P. Heat Transfer, 1986 (McGraw-Hill, New York).
43. Jain, V. K. and Goetz, R. L. Determination of contact heat transfer coefficient for forging of high temperature materials. In Proceedings of the National Heat Transfer Conference, Minneapolis, Minnesota, 1991, pp. 1-6 (American Society of Mechanical Engineers, New York).
44. Beck, J. V. and Osman, A. M. Analysis of quenching and heat treating processes using inverse heat transfer method. In Proceedings of the First International Conference on Quenching and Control of Distortion, Chicago, Illinois, 1992, pp. 147-153.
45. Ramakrishnan, R. I. Quenching analysis of aerospace components using FEM. In Proceedings of the First International Conference on Quenching and Control of Distortion, Chicago, Illinois, 1992, pp. 235-242.
46. Woolman, J. and Mottram, A. I. M. The Mechanical and Physical Properties of the British EN Steels, 1964 (Pergamon, Oxford).
47. Denis, S., Zandona, M., Mey, A., Boufassi, M. and Simon, A. Calculation of internal stresses during surface heat treatment of steels. In Residual Stress, 1993 (Informations-gesellschaft Verlag, Oberusel).