Cyclic oxidation - guidelines for test standardization, aimed at the assessment of service behaviour

Materials at High Temperatures

Volumn 17, Issue 3, 2000, Pages 413-428

  Nicholls, J R ^a   Bennett, M J ^b  

^a CRANFIELD UNIVERSITY   (United Kingdom)

^b Materials Research Consultant   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

ALLOYS; MATERIALS TESTING; SERVICE LIFE; STANDARDIZATION;

CRITICAL THICKNESS; CYCLIC OXIDATION TESTING; HIGH-VELOCITY DYNAMIC COMBUSTION RIGS;

OXIDATION;

EID: 0033666973     PISSN: 09603409     EISSN: None     Source Type: Journal    
DOI: 10.1179/mht.2000.17.3.005     Document Type: Article

References (87)

1. Barrett, C. A. and Lowell, C. E. Oxid. Met. 9, 307-355 (1975).
2. Barrett, C. A. and Lowell, C. E. Oxid. Met. 12, 293-311 (1978).
3. Probst, H. B. and Lowell, C. E. J. Mat. 40, 18-21 (1988).
4. Nesbitt, J. J. Electrochem. Soc. 136, 1511-(1989).
5. Lowell, C. E., Barrett, C. A., Palmer, R. W., Auping, J. V. and Probst, H. B. Oxid. Met. 36, 81 (1991).
6. Bennett, M. J., Perkins, R., Price, J. B. and Starr, F. In: Materials for Advanced Power Engineering (Coutsouradis, D. et al., eds) Kluwer, Dordrecht, 1553 (1994).
7. Quadakkers, W. J. and Bennett, M. J. Mat. Sci. Tech. 10, 126 (1994).
8. Bennett, M. J., Evans, H. E. and Shores, D. A. Mater. High Temp 12, 127-133(1994).
9. Harper, M. A., Barnes, J. E. and Lai, G. Y. In: Corrosion/97, NACE, Houston, TX, paper 97-132 (1997).
10. Chan, K. S. Met. Mater. Trans. 28A, 411-422 (1997).
11. Gleeson, B. A. and Harper, M. A. Oxid. Met. 49(3/4), 373-399 (1998).
12. Cheruvu, N. S., Chan, K. S and Leverant, G. R. ASME paper 98-GT-468 (1998).
13. Chan, K. S., Cheruvu, N. S. and Leverant, G. R. J. Eng. Gas Turbines Power 120, 609-614 (1998).
14. Cheruvu, N. S. reprint from the IGTI Conf. (1999).
15. Chan, K. S., Cheruvu N. S. and Leverant G. R. reprint from the IGTI Conf. (1999).
16. Nesbitt, J. A. and Heckel, R. W. Thin Solid Films, 119, 281-290 (1984).
17. Miller, R. J. Am. Ceram. Soc. 67(8), 517-521 (1984).
18. Morrell, P. and Rickerby, D.S. in Thermal Barrier Coatings AGARD report 823, paper 20, 1998.
19. Coatings for High Temperature Structural Materials, Report to the National Materials Advisory Board, NRC, Washington DC (1996).
20. Barrett, C. A., Johnston, J. R. and Sanders, W. A. Oxid. Met. 12, 343-377 (1978).
21. Ratzer-Schriebe, H. J., Fritscher, K. and Seiersten, M. High Temp. Technol. 7, (1998).
22. Wanhill, R. J. H., Mom, A. J. A., Hersbach, H. J. A., Kool, G. A., and Rogers, J. A. M. High Temp. Technol. 7, 202 (1989).
23. Immarigeon, J. P., Parameswaran, V. R., Chow, D., Morphy, D. D., Gougeon, P., Prystay, M. and Moreau, C. In: Thermal Barrier Coatings AGARD Report No. 823. paper 15 (1998).
24. Nicholls, J. R. and Saunders, S. R. J. High. Temp. Technol. 7, 193-201 (1989).
25. Saunders, S. R. J. and Nicholls, J. R. High Temp. Technol. 7, 232-240 (1989).
26. Quadakkers, W. J., Bongartz, K., Schubert, F., and Schuster, H. In: D. Coursouradis et al. (eds) Materials for Advanced Power Engineering, 2, 1533-1542, Kluwer Academic Publishers, Dordrecht (1994).
27. Robinson, J. and Manning, M. I. Mater. Sci. Tech. 6, 81-91 (1990).
28. Schutze, M. Corrosion Sci. 35, 955-963 (1993).
29. Nagal, M. M. and Evans, W. T. J. Mater. Sci. 28, 6247-6260 (1993).
30. Hancock, P. and Nicholls, J. R. Mater. High Temp. 12, 209-218 (1994).
31. Evans, H. E. Mater. High Temp. 12, 219-227 (1994).
32. Evans, H. E. Int. Mater. Rev. 40, 1-40 (1995).
33. Schutze, M. Mater. High Temp. 12, (1994) 237-247.
34. Evans, H. E. and Lobb, R. C. Corr. Sci. 24, 209-222 (1984).
35. Chan, K. S. Symposium on Cleavage Fracture Minerals, Metals and Materials Society, 207-220 (1997).
36. Evans, H. E. In: Schutze M. and Quadakkers W. J. (eds) Workshop on Cyclic Oxidation Testing as a Tool for High Temperature Materials Characterization, IoM Communications Ltd, London, 3-16 (1999).
37. Starr, F. and Stroosnijder, M. F. In: Corrosion 98, San Diego, NACE Paper No. 98-205, San Diego 1998
38. Wilber, J. P., Nicholls, J. R. and Bennett M. J. In: Schutze M. and Quadakkers W. J. (eds) Workshop on Cyclic Oxidation Testing as a Tool for High Temperature Materials Characterization, IoM Communications Ltd, London, 133-147 (1999).
39. Nicholls, J. R. In: Grabke, H. J. and Meadowcroft, D. B. (eds) Guidelines for Methods of Testing and Research in High Temperature Corrosion EFC-14, 11-36, Institute of Materials, (1995).
40. Schutze, M. and Quadakkers, W. J. Workshop on Cyclic Oxidation as a Tool for High Temperature Materials Characterisation, EFC Publication no. 27, IoM Communications Ltd, London, (1999).
41. Grabke, H. J. In: Grabke, H. J. and Meadowcroft, D. B. (eds) Guidelines for Methods of Testing and Research in High Temperature Corrosion EFC-14, 52-61, Institute of Materials, (1995).
42. Nicholls, J. R. , Smith, P. J. and Oakey, J. E. In: Coutsouradis, D. et al. (eds), Materials for Advanced Power Engineering Part II, 1273-1289, Kluwer Academic Publishers, Dordrecht (1984).
43. Nicholls, J. R. In: Costa, J. M. and Mercer A. D. (eds) Progress in the Understanding and Provision of Corrosion, Institute of Materials, London, Vol. 1, pp. 712-729 (1993).
44. Bennett, M. J., Perkins, R., Price, J. B. and Starr, F. In: Coutsouradis, D. et al. (eds) Materials for Advanced Power Engineering, 2, 1553-1562, Kluwer Academic Publishers.
45. Wood, N. J. and Starr, F. Microscopy of Oxidation-2, pp. 298-309, Newcomb, S. B. and Bennett, M. J. (eds), The Institute of Materials, London (1994).
46. First Draft Code of Practice for Discontinuous Corrosion Testing in High Temperature Gaseous Atmospheres, Authors Testcorr Partners, published by ERA Technology, Dec. 1998.
47. Meadowcroft, D. B. et al. Materials Science Forum, Vols 251-254, 973-978 (1997).
48. Hot Corrosion Task Force of the Gas Turbine Panel, ASTME Round Robin Test (1970); cited in S. R. J. Saunders and J. R. Nicholls, Thin Solid Films 119, 247-269, (1984).
49. Hot Corrosion Task Force of the Gas Turbine Panel, ASTME Round Robin Test (1970); cited in S. R. J. Saunders and J. R. Nicholls, Thin Solid Films 119, 247-269, (1984).
50. Saunders, S. R. J. and Nicholls, J. R. Mater. High Temp. 13, (1995).
51. Asher, J., Bennett, M. J., Hawes, R. H. W., Price, J. B., Tuson, A. T, Savage, D. J. and Sugden, S. Mater. Sci. Eng. 88, 143-150 (1987).
52. Asher, J., Sugden, S., Bennett, M.J., Hawes, R. W. M., Savage, D. J. and Price, J. B. Werkst. Korros. 38, 506-516 (1987).
53. Bennett, M. J., Butler, D. J., Colledge, P. D., Price, J. B., Scruby, C. B. and Stacey, K. A. Mater. Sci. Eng. A. 120, 199 (1989).
54. Zeng, Y., Zou, D., Stout, J. H. and Shores, D.A., unpublished results; cited in ref. 8.
55. Haanappel, V. A.C. and Stroosnijder, M. F. In: Schutze, M. and Quadakkers, W. J. (eds) Workshop on Cyclic Oxidation Testing as a Tool for High Temperature Materials Characterization, IoM Communications Ltd, London, (1999).
56. Hancock, P. and Nicholls, J. R. Mater. Sci. Technol. 4, 398-406 (1988).
57. Wilber, J. P., Nicholls, J. R. and Bennett M. J. In: Newcomb, S. B. and Little, J. A. (eds) Microscopy of Oxidation-3, pp. 207-220, Institute of Materials, London, (1997).
58. Guttmann, V., Hukelmann, F. and Beaven, P. A. In: Schutze M. and Quadakkers W. J. (eds) Workshop on Cyclic Oxidation Testing as a Tool for High Temperature Materials Characterization, pp. 17-37, IoM Communications Ltd, London, (1999).
59. Pint, B.A. , Tortorelli, P. F. and Wright, I. G/. In: Schutze M. and Quadakkers W. J. (eds) Workshop on Cyclic Oxidation Testing as a Tool for High Temperature Materials Characterization, pp. 111-132, IoM Communications Ltd, London (1999).
60. Naumenko, D., Singheiser, L. and Quadakkers, W. J. In: Schutze M. and Quadakkers W. J. (eds) Workshop on Cyclic Oxidation Testing as a Tool for High Temperature Materials Characterization, pp. 287-306, IoM Communications Ltd, London, (1999).
61. Strehel, G., Rodriguez, L., Al-Badairy, H., Borchardt, G. and Tatlock, G. In: Schutze M. and Quadakkers W. J. (eds) Workshop on Cyclic Oxidation Testing as a Tool for High Temperature Materials Characterization, pp. 82-94, IoM Communications Ltd, London, (1999).
62. Bennett, M. J., DeVan, J. H. and Tortorelli, P. F. Microscopy of Oxidation-3 Newcomb, S. B. and Little, J. A. (eds), The Institute of Materials, London, pp. 233-245 (1994).
63. Schutze, M. Protective Oxide Scales and Their Breakdown, Holmes, D. (ed.) John Wiley, Chichester (1997).
64. Wilber, J. P., Bennett, M. J. and Nicholls, J. R. In: Lecomte-Beckers, J., Schubert, F. and Ennis, P. J. (eds) Materials for Advanced Power Engineering-1998, pp. 835-946, Forschungszentrum Julich, Germany (1998).
65. Nagl, M. M., Evans, W. T., Hall, D. J. and Saunders, S. R. J. Mater. Sci. Technol. 8,. 1043 (1992).
66. Nagl, M. M., Saunders, S. R. J., Evans, W. T. and Hall, D. J. Corros. Sci. 35, 965 (1993).
67. Nagl, M. M. and Evans, W. T. Mater. Sci. 28, 6247 (1993).
68. Gleeson, B. In: Schutze, M. and Quadakkers, W. J. (eds) Workshop on Cyclic Oxidation Testing as a Tool for High Temperature Materials Characterization, IoM Communications Ltd, London, (1999).
69. Steinkusch, W. In: Schutze, M. and Quadakkers, W. J. (eds) Workshop on Cyclic Oxidation Testing as a Tool for High Temperature Materials Characterization, pp. 307-323. IoM Communications Ltd, London, (1999).
70. Maier, M., and Norton, J. F. In: Schutze, M. and Quadakkers, W. J. (eds) Workshop on Cyclic Oxidation Testing as a Tool for High Temperature Materials Characterization, pp. 240-258, IoM Communications Ltd, London, (1999).
71. Vangeli, P. In: Schutze, M. and Quadakkers, W. J. (eds) Workshop on Cyclic Oxidation Testing as a Tool for High Temperature Materials Characterization, pp. 198-208, IoM Communications Ltd, London, (1999).
72. Antoni, L. and Herbelin, J. M. In: Schutze, M. and Quadakkers, W. J. (eds) Workshop on Cyclic Oxidation Testing as a Tool for High Temperature Materials Characterization, pp. 187-197, IoM Communications Ltd, London, (1999).
73. Leyens, C., Wright, I. G., Pint, B. A. and Tortorelli, P. T. In: Schutze, M. and Quadakkers, W. J. (eds) Workshop on Cyclic Oxidation Testing as a Tool for High Temperature Materials Characterization, pp. 168-186, IoM Communications Ltd, London, (1999).
74. Chang, S. Y., Wollmann, M., Krupp, U. and Christ, H. J. In: Schutze, M. and Quadakkers, W. J. (eds) Workshop on Cyclic Oxidation Testing as a Tool for High Temperature Materials Characterization, IoM Communications Ltd, London, (1999).
75. Martinz, H. P., Müller, F. and Prandini, K. In: Schutze, M. and Quadakkers, W. J. (eds) Workshop on Cyclic Oxidation Testing as a Tool for High Temperature Materials Characterization, pp. 95-108, IoM Communications Ltd, London, (1999).
76. Jönsson, B., Westerlun, A. and Landor, G. In: Schutze, M. and Quadakkers, W. J. (eds) Workshop on Cyclic Oxidation Testing as a Tool for High Temperature Materials Characterization, pp. 324-335, IoM Communications Ltd, London, (1999).
77. Janakiraman, R., Meier, G. H. and Pettit, F.S. In: Schutze, M. and Quadakkers, W. J. (eds) Workshop on Cyclic Oxidation Testing as a Tool for High Temperature Materials Characterization, pp. 38-62, IoM Communications Ltd, London, (1999).
78. Singheiser, L. Private communication (1999).
79. Quadakkers, W. In: Schutze, M. and Quadakkers, W. J. (eds) Workshop on Cyclic Oxidation Testing as a Tool for High Temperature Materials Characterization, pp. 339-356, IoM Communications Ltd, London, (1999).
80. Schmackers, T. and Reimers, W. In: Schutze, M. and Quadakkers, W. J. (eds) Workshop on Cyclic Oxidation Testing as a Tool for High Temperature Materials Characterization, pp. 357-372, IoM Communications Ltd, London, (1999).
81. Fritscher, K. In: Schutze, M. and Quadakkers, W. J. (eds) Workshop on Cyclic Oxidation Testing as a Tool for High Temperature Materials Characterization, pp. 383-391, IoM Communications Ltd, London, (1999).
82. Swadzba, L. In: Schutze, M. and Quadakkers, W. J. (eds) Workshop on Cyclic Oxidation Testing as a Tool for High Temperature Materials Characterization, pp. 392-407, IoM Communications Ltd, London, (1999).
83. Hearley, J. A., Little, J. A. and Sturgeon, A. J. In: Schutze, M. and Quadakkers, W. J. (eds) Workshop on Cyclic Oxidation Testing as a Tool for High Temperature Materials Characterization, pp. 408-420.
84. IoM Communications Ltd, London, (1999).
85. Weber, T. and Schutze, M. In: Schutze, M. and Quadakkers, W. J. (eds) Workshop on Cyclic Oxidation Testing as a Tool for High Temperature Materials Characterization, pp. 259-269, IoM Communications Ltd, London, (1999).
86. Kerkhoff, G., Vaßen, R. and Stöver. D. In: Schutze, M. and Quadakkers, W. J. (eds) Workshop on Cyclic Oxidation Testing as a Tool for High Temperature Materials Characterization, pp. 373-382, IoM Communications Ltd, London, (1999).
87. Bennett, M. J. and Houlton, M. R. In: Bachelet, E. et al. (eds) High Temperature Materials for Power Engineering, pp. 227-238, Kluwer Academic Publishers, Dordrecht (1990).