Wear of TiC-coated carbide tools in dry turning

Wear

Volumn 225-229, Issue I, 1999, Pages 354-367

  Lim, C Y H ^a   Lim, S C ^a   Lee, K S ^a  

^a NATIONAL UNIVERSITY OF SINGAPORE   (Singapore)

Author keywords

Carbide tools; TiC coatings; Wear maps; Wear mechanisms

Indexed keywords

ABRASION; CRACK INITIATION; METAL CUTTING; PLASTIC DEFORMATION; PROTECTIVE COATINGS; STEEL; TITANIUM CARBIDE; TURNING;

CRATER WEAR; DRY TURNING; FLANK WEAR;

CARBIDE CUTTING TOOLS;

CERAMICS; CUTTING TOOL; WEAR;

EID: 0033500556     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0043-1648(98)00366-4     Document Type: Article

References (49)

1. C. Wick, Manuf. Eng. 97 (1986) 26-31.
2. D.A. Payne, J.-M. Bind, I. Ham, J.V. Biggers, J. Eng. Ind. 97 (1975) 1126-1130.
3. T.E. Hale, D.E. Graham, Proc. Conf. Cutting Tool Materials, Ft. Mitchell, KY, September 15-17, 1980, American Society of Metals, Metals Park, OH, 1981, pp. 175-191.
4. P.A. Dearnley, J. Eng. Mater. Technol. 107 (1985) 63-82.
5. J.-E. Sundgren, H.T.G. Hentzell, J. Vac. Sci. Technol. A 4 (1986) 2259-2279.
6. Tool-Life Testing with Single-Point Turning Tools, International Standards, ISO 3685-1977 (E), International Organization for Standardization, Geneva, 1977.
7. Machining Data Handbook, Vols. 1 and 2, Machining Data Center, Metcut Associates, 3rd edn., Cincinnati, OH, 1980.
8. T.J. Drozda (Ed.), Tool and Manufacturing Engineers Handbook, Vol. 1, Machining, Society of Manufacturing Engineers, 4th edn., Dearborn, MI, 1983.
9. J.R. Davis (Ed.), Metals Handbook, Vol. 16, Machining, ASM International, Metals Park, 9th edn., OH, 1989.
10. V.A. Tipnis, in: M.B. Peterson, W.O. Winer (Eds.), Wear Control Handbook, American Society of Mechanical Engineers, 1980, pp. 891-930.
11. S.C. Lim, S.H. Lee, Y.B. Liu, K.H.W. Seah, Wear 170 (1993) 137-144.
12. J.P. Chubb, J. Billingham, Wear 61 (1980) 283-293.
13. B.P. Sarmah, M.K. Khare, Wear 127 (1988) 229-240.
14. K. Stjernberg, A. Thelin, Proc. Int. Conf. High Productivity Machining, Materials and Processes, ASM International, 1985, pp. 95-104.
15. E.M. Trent, Wear 128 (1988) 29-45.
16. E.M. Trent, Wear 128 (1988) 47-64.
17. P. Hedenqvist, M. Olsson, Tribol. Int. 24 (1991) 143-150.
18. P. Karapantev, Ann. CIRP 27 (1978) 79-85.
19. J.I. Elgomayel, J.F. Radavich, M. Tseng, Int. J. Mach. Tool Des. Res. 19 (1979) 205-219.
20. F. Heydari, J. Wallbank, I.R. Pashby, Proc. Int. Conf. Wear of Materials, Houston, TX, 1987, American Society of Mechanical Engineers, pp. 313-324.
21. E.M. Trent, Wear 128 (1988) 65-81.
22. E.M. Trent, Metal Cutting, 3rd edn., Butterworth-Heinemann, Oxford, 1991.
23. W.D. Sproul, M.H. Richman, Met. Technol. 3 (1976) 489-493.
24. D.S. Rickerby, P.J. Burnett, Surf. Coat. Technol. 33 (1987) 191-211.
25. D.E. Graham, T.E. Hale, Carbide Tool J., May-June 1982, pp. 34-38.
26. Y. Naerheim, E.M. Trent, Met. Technol. 4 (1977) 548-556.
27. H. Jonsson, Wear 32 (1975) 151-166.
28. A.W. Ruff, in: K. Holmberg, I. Nieminen (Eds.), Eurotrib 89-Proc. 5th Int. Congress on Tribology, Helsinki, 1989, Finnish Society for Tribology, Vol. 4, 1989, pp. 26-31.
29. H. Czichos, in: P.J. Blau (Ed.), Metals Handbook, Vol. 18, Friction, Lubrication and Wear Technology, ASM International, 10th edn., Metals Park, OH, 1992, pp. 489-492.
30. K.A. Kendall, in: P.J. Blau (Ed.), Metals Handbook, Vol. 18, Friction, Lubrication and Wear Technology, ASM International, 10th edn., Metals Park, OH, 1992, pp. 609-619.
31. S.C. Lim, M.F. Ashby, Acta Metall. 35 (1987) 1-24.
32. S.C. Lim, M.F. Ashby, J.H. Brunton, Acta Metall. 35 (1987) 1343-1348.
33. R. Antoniou, C. Subramanian, Scripta Metall. 22 (1988) 809-814.
34. Y. Liu, R. Asthana, P. Rohatgi, J. Mater. Sci. 26 (1991) 99-102.
35. P.M. Ramsey, T.F. Page, Br. Ceram. Trans. J. 87 (1988) 74-80.
36. S.C. Lim, Y.B. Liu, S.H. Lee, K.H.W. Seah, Wear 162-164 (1993) 971-974.
37. S.C. Lim, C.Y.H. Lim, K.S. Lee, Wear 181-183 (1995) 901-912.
38. C.Y.H. Lim, S.C. Lim, K.S. Lee, in: S. Bahadur, J. Magee (Eds.), Wear Processes In Manufacturing, ASTM STP 1362, American Society for Testing and Materials, Philadelphia, PA, 1999, in press.
39. R. Ljungqvist, Proc. 3rd Int. Conf. Chemical Vapour Deposition, American Nuclear Society, 1972, pp. 383-396.
40. B. Colding, Int. Cutting Tool Day, Sandviken, 1969, pp. 1-15.
41. A.K. Chattopadhyay, A.B. Chattopadhyay, Wear 80 (1982) 239-358.
42. S.C. Lim, S.H. Lee, Y.B. Liu, K.H.W. Seah, Tribotest 3 (1996) 67-88.
43. E.M. Trent, J. Inst. Prod. Eng. 38 (1959) 05-130.
44. H. Opitz, M. Gappisch, Int. J. Mach. Tool Des. Res. 2 (1962) 43-73.
45. M. Kodama, A.H. Shabaik, R.F. Bunshah, Thin Solid Films 54 (1978) 353-357.
46. P.A. Dearnley, E.M. Trent, Met. Technol. 9 (1982) 60-75.
47. W. Schintlmeister, W. Wallgram, J. Kanz, Thin Solid Films 107 (1983) 117-127.
48. K. Nakamura, K. Inagawa, K. Tsuruoka, S. Komiya, Thin Solid Films 40 (1977) 155-167.
49. H.S. Kalish, American Machinist, August, 1977, pp. 90-92.