Study of the influence of phase composition and iron content on the formability characteristics of zinc-iron electroplated sheet steel

Journal of Materials Engineering and Performance

Volumn 8, Issue 5, 1999, Pages 531-537

  De Wit, K ^a   De Boeck, A ^b   De Cooman, B C ^a  

^a GHENT UNIVERSITY   (Belgium)

^b Onderzoekscentrum voor de Aanwending van Staal   (Belgium)

Author keywords

[No Author keywords available]

Indexed keywords

BRITTLENESS; DELAMINATION; ELECTROPLATING; FORMABILITY; FRICTION; IRON; MICROHARDNESS; PHASE COMPOSITION; PROTECTIVE COATINGS; TRIBOLOGY; WEAR OF MATERIALS; ZINC ALLOYS;

CUP TEST; GALLING; V-BEND TEST;

STEEL SHEET;

EID: 0033357253     PISSN: 10599495     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11665-999-0005-7     Document Type: Article

References (33)

1. T. Hada, Present and Future Trends of Coated Steel Sheet for Automotive Industry, Proc. Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet (GALVATECH) (Tokyo), ISIJ, 1989, p 111
2. T. Adaniya, Trend of Corrosion Resistant Steels for Automobile Use in Japan, NKK Tech. Rev., (No. 63), 1991, p 1
3. T. Watanabe, M. Ohmura, T. Honma, and T. Adaniya, Iron Zinc Alloy Electroplated Steel for Automotive Body Panels, SAE Technical Paper Series, No. 820424, 1982
4. T. Hada, T. Fujiwara, T. Kanamaru, M. Nakayama, and T. Horita, Zinc-Iron Alloy Coated Steel Sheets for Automotive Corrosion Protection, Proc. Int. Conf. on Surface Modifications and Coatings, American Society for Metals, 1985, p 29
5. E. Gallo and D.K. Matlock, The Importance of Microstructure on the Formability of Galvannealed IF Sheet Steel, Proc. Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet (GALVATECH) (Chicago), ISIJ, 1995, p 739
6. T. Irie, Development of Zinc-Based Coatings for Automotive Steel Sheet in Japan, Zinc-Based Steel Coating Systems: Metallurgy and Performance, The Minerals, Metals and Materials Society/AIME, 1990, p 143
7. T. Kanamaru, M. Nakayama, Y. Ogawa, J. Morita, and K. Arai, Properties of Iron-Zinc Electroplated Galvannealed Steel Sheet, Nipp. Steel Tech. Rep., Vol 63, 1994, p 23
8. K. Kondo, Morphology and Microstructure of Electrodeposited Zinc-Iron Binary Alloys, ISIJ Int., Vol 29, 1989, p 517
9. K. De Wit, J. Dilewijns, A. De Boeck, and B. De Cooman, The Influence of Fe-Content and Phase Composition on the Application Properties of Zinc-Iron Electrodeposited Steel Sheet, Proc. Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet (GALVATECH), ISIJ, 1995, p 399
10. Y. Liu, Effect of Coating Characteristics on Friction and Formability of Zn-Fe Alloy Electroplated Sheet Steel, J. Mater. Eng. Perform., Aug 1996, p 469
11. H. Kojima, T. Yamamoto, K. Ito, T. Fujiwara, and T. Kanamaru, Properties of Zn-Fe Alloy Electroplated Steel Sheets, SAE Technical Paper Series, No. 840214, 1984
12. T. Adaniya, M. Sagiyama, and T. Honma, Phase Composition and Properties of Electrodeposited Zn-Fe Alloy, Nippon Kokan Tech. Rep., (No. 43), 1985, p 33
13. A. De Boeck, L. Vanlerberghe, and M. Vanthournout, Quantitative Analysis of Zinc and Zinc Alloy Coatings on Steel, La Revue de Métallurgie-CIT, Oct 1993, p 1277
14. M. Vermeulen, Development of a New Technique to Characterize the Tribological Behaviour of the Steel-Oil-Die System, Proceedings of the SIBETEX Seminar, OCAS, Zelzate, 1992
15. W. Warnecke and N. Müschenborn, Formability Aspects of Galvannealed Steel Sheet, BDDRG Conference Proceedings (Amsterdam, The Netherlands), May 1985
16. R. Krämer, "Study of Methods for Evaluation of the Powdering and Flaking Behavior of Coated Sheet", thesis, Rheinische Fachhoch-schule Köln, 1992 (in German)
17. J. Hisamoto, K. Ikeda, N. Yamamura, and H. Satoh, The Effect of Coating Hardness on the Peeling-Off Behavior of Electrogalvanized Steel Sheets and Some Aspects of Their Press Formability, Zinc-Based Steel Coating Systems: Metallurgy and Performance, The Minerals, Metals and Materials Society/AIME, 1990, p 333
18. J.M. Van der Hoeven, Simulation of Friction and Galling in Drawing Processes, Proceedings of the SIBETEX Seminar, OCAS, Zelzate, 1992
19. Y. Yau and S.O. Fountoulakis, Characterization of the Coating-to-Steel Interface Strength in ZnNi Coated Sheet Steel, Zinc-Based Steel Coating Systems: Metallurgy and Performance, The Minerals, Metals and Materials Society/AIME, 1990, p 371
20. C. Ortlieb and A. De Boeck, Internal document, OCAS N.V., J. Kennedylaan, 3, B 9060 Zelzate, Belgium, June 1995
21. C.A. Drewien, Phase Transformations in Electrodeposited Iron-Zinc Alloy Coatings, Ph.D. dissertation, Lehigh University, June 1992
22. K. Kondo, S. Hinotani, and Y. Ohmori, Crystal Structure and Morphology of Electrodeposited Zinc-Iron Binary Alloys, J. Appl. Electrochem., Vol 18, 1988, p 154
23. T. Fujieda, A. Naganawa, M. Toyota, S. Higuchi, and S. Takahashi, Structure of Electrodeposited Zn-Fe Alloy in the Zn-Rich Region, ISIJ Int., Vol 32, 1992, p 1044
24. 78, Acta Cryst., Vol 37B, 1981, p 1905
25. D.J. Meuleman, S.G. Denner, and F.L. Cheng, The Effect of Zinc Coatings on the Formability of Automotive Sheet Steels, SAE Technical Paper Series, No. 840370, 1984
26. M. Pimminger, F.M. Androsch, and S. Wiesinger, Zinc-Nickel Alloy Electroplated Steel Sheet - Production and Properties, Conference Proceedings of the Fourth International Zinc Coated Steel Conference (Paris), 1994, S1F
27. G. Claus, J. Dilewijns, B.C. De Cooman, and U. Meers, Determination of the Process Window for Optimal Galvannealing of Ti-IF Steel, Proc. Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet (GALVATECH), ISIJ, 1995, p 107
28. G. Claus, J. Dilewijns, H. Storms, J. Scheers, and B.C. De Cooman, Microstructure and Deformation Properties of Galvannealed Coatings on Ti-IF Steels, La Revue de Métallurgie-CIT, June 1995, p 805
29. K.P. Imlau, Production and Properties of Electrolytically Deposited ZnFe Alloy Coatings, Forschungsvorhaben der EGKS, April 1991 (in German)
30. A. De Boeck, "Study of Electrodeposited Zinc and Zinc-Nickel on Sheet Steel", Ph.D. thesis, University of Ghent, Belgium, April 1994 (in Dutch)
31. S.H. Deits and D.K. Matlock, Formability of Coated Sheet Steels: An Analysis of Surface Damage Mechanisms, Zinc-Based Steel Coating Systems: Metallurgy and Performance, The Minerals, Metals and Materials Society/AIME, 1990, p 297
32. K. Meseure, C. Xhoffer, B.C. De Cooman, I. Hertveldt, and J. Dilewijns, The Shear Strength of Galvannealed Coatings on IF-Steels, Conference Proceedings of the Fifth International Zinc Coated Steel Conference (Birmingham), 1997
33. Y. Adachi, M. Arai, and T. Nakamori, Coating Adhesion and Interface Structure of Galvannealed Steel, Tetsu-to-Hagané, Vol 80 (No. 3), 1994, p 225 (in Japanese)