Distinctive aspects of the physical metallurgy of warm rolling

ISIJ International

Volumn 39, Issue 9, 1999, Pages 856-873

  Barnett, M R ^a   Jonas, J J ^b  

^a DEAKIN UNIVERSITY   (Australia)

^b MCGILL UNIVERSITY   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

FERRITE; PHASE TRANSITIONS; PLASTIC DEFORMATION; PLASTIC FLOW; RECRYSTALLIZATION (METALLURGY); ROLLING; STEEL METALLURGY; THERMAL EFFECTS;

FERRITIC ROLLING; INTERSTITIAL FREE STEEL; WARM ROLLING;

CARBON STEEL;

EID: 0033356516     PISSN: 09151559     EISSN: None     Source Type: Journal    
DOI: 10.2355/isijinternational.39.856     Document Type: Article

References (77)

1. P. Harlet, F. Beco, P. Cantinieaux, D. Bouquegneau, P. Messien and J. C. Herman: Int. Symp. On Low C Steels for the 90's, ed. by R. Asfahani and G. Tither, TMS-AIME, Warrendale, PA. (1993), 389.
2. W. H. Parks, C. S. Haggerty and T. R. Rock: Iron Steet Eng., (1997), 35.
3. H. Grossheim, K. Schotten and W. Bleck: J. Materials Process. Technol, 60 (1996), 609.
4. P. Messien, J. C. Herman, V. Leroy, Ph. Harlet, F. Beco and L. Renard: Developments in the Annealing of Sheet Steels, ed. by R. Pradhan and I. Gupta, TMS-AIME, Warrendale, PA, (1992), 287.
5. M. Unemoto, A. Hiramatsu, A. Moriya, T. Watanabe, S. Nanba, N. Nakajima, G. Anan and Y. Higo: ISIJ Int., 32 (1992), 306.
6. P. A. Bagshaw and R. J. Kimber: Int. Conf. on Thermomechanical Processing of Steels and Other Materials (THERMEC'97), ed. by T. Chandra and T. Sakai, TMS-AIME, Warrendale, PA, (1998), 147. (Plus personal communications.)
7. Y. Saito: Trans. Iron Steel Inst. Jpn., 27 (1987), 419.
8. D. Vanderschueren, L. Kostens, P. Van Houtte, E. Aernoudt, J. Dilewijns and U. Meers: Mater. Sci. Technol., 6 (1990), 1247.
9. E. A. Simielli, S. Yuc and J. J. Jonas: Metall. Trans. A, 23A (1992), 597.
10. M. R. Barnett, P. D. Hodgson and J. J. Jonas: 37th MWSP Conf. Proc., ISS, Warrendale, PA, XXXII (1995), 385.
11. T. Senuma and H. Yada: Int. Conf. on Thermomechanical Processing of Steels and Other Materials (THERMEC'88), ed. by I. Tamura, TMS-AIME, Warrendale, PA, (1988), 636.
12. A. Schmickl, D. Yu, C. Killmore, D. Langley and T. Chandra: ISIJ Int., 36 (1996), 1279.
13. A. Laasraoui and J. J. Jonas: Metall. Trans. A, 22A (1991), 1545.
14. H. J. McQueen, W. Blum, Q. Zhu and V. Demuth: Advances in Hot Deformation Textures and Microstructures, TMS-AIME, Warrendale, PA, (1994), 235.
15. A. Schmitz: Doctoral Thesis, Univ. of Leuven, Belgium, (1995).
16. M. R. Barnett, G. Hamilton and W. Y. D. Yuen: Materials '98. ed. by M. Ferry, IMEA, Wollongong, (1998), 153.
17. M. R. Barnett and J. J. Jonas: ISIJ Int., 37 (1997), 697.
18. M.R. Barnett: Modern LC and ULC Sheet Steels for Cold Forming: Processing and Properties, ed. by W. Bleck, Verlag Mainz, Aachen, (1998), 61.
19. J. D. Baird and A. Jamieson: J. Iron Steel Inst., (1966), 793.
20. A. H. Cottrell: Dislocations and Plastic Flow in Crystals, Oxford University Press, London, (1953), 136.
21. M. R. Barnett: Materials '98. ed. by M. Ferry, IMEA, Wollongong, (1998), 167.
22. J. Glen: J. Iron Steel Inst., (1957), 21.
23. K. Osakada and S. Fujii: J. Mech. Work. Technol., 2 (1978), 241.
24. E. V. Subramanian and D. L. Bourell: J. Appl. Metalwork., 3 (1984), 264.
25. A. S. Keh, Y. Nakada and W. C. Leslie: Dislocation Dynamics, ed. by A. R. Rosenfield, G. T. Hahn, A. L, Bement, Jr. and R. L Jaffee, McGraw-Hill, New York, (1967), 381.
26. G. E. Dieter: Mechanical Metallurgy. McGraw-Hill, London, (1988), 535.
27. G. Glover and C. M. Sellars: Metall. Trans., 4 (1973), 765.
28. T. Takeyama and H. Takahashi: Trans. Iron Steel Inst. Jpn., 13 (1973), 293.
29. R. J. McElroy and Z. C. Szkopiak: Int. Metall. Rev., 17 (1972), 175.
30. J. J. Jonas, C. M. Sellars and W. J. McG. Tegart: Metall. Rev., Review 130, (1969), 1.
31. Y. Matsubara, N. Tsuji and Y. Saito: Int. Conf. on Thermomechanical Processing of Steels and Other Materials (THERMEC'97), ed. by T. Chandra and T. Sakai, TMS-AIME, Warrendale, PA, (1997), 653.
32. T. Senuma, H. Yada, R. Shimizu and J. Harase: Acta Metall. Mater., 38 (1990), 2673.
33. M. R. Barnett: CRM Internal Report, (1997).
34. M. R. Barnett: ISIJ Int., 38 (1998), 78.
35. G. H. Akbari, C. M. Sellars and J. A. Whiteman: Acta Metall. Mater., 45 (1997), 5047.
36. B. Bay, N. Hansen, D. A. Hughes and D. Kuhlmann-Wilsdorf: Acta Metall. Mater., 40 (1992), 205.
37. D. A. Hughes and N. Hansen: Metall. Trans. A, 24A (1993), 2021.
38. K. Ushioda, H. Ohsone and M. Abe: Proc. 6th Int. Conf. on Textures of Materials (ICOTOM 6), ISIJ, Tokyo, (1981), 829.
39. A. Korbel, J. D. Embury, M. Hatherly, P. L. Martin and H. W. Erbsloh: Acta Metall., 34 (1986), 1999.
40. S. L Semiatin and J. J. Jonas: Formability and Workability of Metals - Plastic Instability and Flow Localisation, ASM, Metals Park, Ohio, (1984), 43.
41. S. Matsuoka, K. Sakata, S. Satoh and T. Kato: Textures Microstruct., 22 (1993), 113.
42. E. Aernoudt, P. Van Houtte and T. Leffers: Materials Science and Technology - A Comprehensive Treatment, Vol. 6, VCH, Weinheim, (1993), 89.
43. T. Sakai, Y. Saito and K. Kato: Trans. Iron Steel Inst. Jpn., 28 (1988), 1037.
44. Y. Shimizu, Y. Ito and Y. Iida: Metall. Trans. A, 17A (1986), 1323.
45. R. D. Doherty, D. A. Hughes, F. J. Humphreys, J. J. Jonas, D. Juul Jensen, M. E. Kassner, W. E. King, T. R. McNellcy, H. J. McQueen and A. D. Rollett: Mater. Sci. Eng., A238 (1997), 219.
46. J. Baczynski and J. J. Jonas: Metall. Trans. A, 29A (1998), 447.
47. A. Najafi-Zadeh, J. J. Jonas and S. Yue: Metall. Trans. A, 23A (1992), 2607.
48. R. Z. Wang and T. C. Lei: Scr. Met. Mater., 31 (1994), 1193.
49. S. Gohda, K. Watanabe and Y. Hashimoto: Trans. Iron Steel Inst. Jpn., 21 (1981), 6.
50. S. Gourdet and F. Monthelliet: J. Phys., 5 (1994), 255.
51. P. R. Cetlin, S. Yue, J. J. Jonas and T. M. Maccagno: Metall. Trans. A, 24A (1993), 1543.
52. M. R. Barnett: BHP Steel, unpublished work, (1998).
53. H. Langner, W. Bleck and C. Greisert: Modern LC and ULC Sheet Steels for Cold Forming: Processing and Properties, 1, ed. by W. Bleck, Verlag Mainz, Aachen, (1998), 301.
54. M. R. Barnett and J. J. Jonas: ISIJ Int., 37 (1997), 706.
55. M. R. Barnett, J. J. Jonas and P. D. Hodgson: Iron Steelmaker, (1996), 39.
56. T. Senuma and K. Kawasaki: ISIJ Int., 34 (1994), 51.
57. B. J. Duggan, H. Ning and L. X. Zhang: Int. Conf. on Thermomechanical Processing of Steels and Other Materials (THERMEC'97), ed. by T. Chandra and T. Sakai, TMS, Warrendale, PA, (1998), 2305.
58. D. Vanderschueren, N. Yoshinaga and K. Koyama: ISIJ Int., 36 (1996), 1046.
59. T. Senuma: Modern LC and ULC Sheet Steels for Cold Forming: Processing and Properties, ed. by W. Bleck, Verlag Mainz, Aachen, (1998), 157.
60. W. B. Hutchmson: Int. Met. Rev., 29 (1984), 25.
61. S. Matsuoka, K. Sakata, S. Satoh and T. Kato: ISIJ Int., 34 (1994), 77.
62. P. Messien and J. Herman in Int. Symp. on Low C Steels for the 90's, Ed. by R. Asfahani and G. Tither, TMS-AIME. Warrendale, PA, (1993), 383.
63. S. Matsuoka, K. Sakata, O. Furukimi and T. Obara: Modern LC and ULC Sheet Steels for Cold Forming: Processing and Properties, Ed. by W. Bleck, Verlag Mainz, Aachen, (1998), 85.
64. A. Schmitz and J-C. Herman: 1st Int. Conf. on Modelling Metal Rolling Processes, Institute of Materials, London. (1993), 438.
65. V. B. Ginzburg: Steel Rolling Technology: Theory and Practice, Marcel Dekker, NY, (1989), 227, 241.
66. T. Sakai, Y. Saito, K. Hirano and K. Kato: Trans. Iron Steel Inst. Jpn., 28 (1988), 1028.
67. S. Matsuoka, M. Morita, O. Furukimi and T. Obara: ISIJ Int., 38 (1998), 633.
68. R. F. Gadellaa, P. J. Freijer, M. C. M. Cornelissen, B. Donnay, J. C. Herman and V. Leroy: Proc. METEC Cong. 94, Verein Deutscher Eisenhüttenleute, Dusseldorf, (1994), 382.
69. L. Meyer, W. Bleck and T. Heidelhauf: Int. Symp. on Low-Carbon Steels for the 90's, ed. by R. Asfahani and G. Tither, TMS, Warrendale, PA, (1993), 427.
70. O. Kwon, G. Kim and R. W. Chang: Metallurgy of Vacuum-Degassed Steel Products, Ed. by R. Pradhan, TMS-AIME, Warrendale, PA, (1990), 215.
71. V. Leroy and J. C. Herman: Microalloying '95, ISS, Warrendale, PA, (1995), 213.
72. S. Claessens, D. Vanderschueren, D. Bultinck, I. Bungelman and J. Dilewijns: Hot Workability of Steels and Light Alloys - Composites, CIM, Montreal, (1996), 341.
73. S. Hashimoto, T. Kashima, N. Nakajima, H. Shirasawa and M. Miyahara: Metallurgy of Vacuum-Degassed Steal Products, ed. by R. Pradhan, TMS-AIME, Warrendale, PA, (1990), 357
74. R. Smith, P. Edwards and J. Dock: BHP Steel, unpublished work, (1997).
75. K. M. Browne, J. Dryden and M. Assefpour: Recent Advances in Heat Transfer and Micro-Structure Modelling for Metal Processing, MD-Vol. 67, Ed. by R-M. Guo and J. J. M. Too, ASME, New York, (1995), 187.
76. A. De Paepe, J-C. Herman and V. Leroy: Steel Res., 68 (1997), 479.
77. M. R. Barnett: BHP Steel, unpublished work, (1998).