A strip yield analysis of fatigue crack growth in the residual stress field

International Journal of Fracture

Volumn 96, Issue 3, 1999, Pages 247-277

  Wang, G S ^a  

^a Aeronautical Research Institute of Sweden   (Sweden)

Author keywords

Crack closure; Fatigue crack growth; Residual stress; Stress intensity factors; Strip yield model; Weight functions

Indexed keywords

CRACKS; FATIGUE OF MATERIALS; FRACTURE MECHANICS; INTEGRAL EQUATIONS; LOADS (FORCES); MATHEMATICAL MODELS; RESIDUAL STRESSES; STRESS INTENSITY FACTORS; STRESS RELAXATION;

CRACK CLOSURE; FATIGUE CRACK GROWTH; FATIGUE LOADING; STRIP YIELD MODEL; WEIGHT FUNCTIONS;

CRACK PROPAGATION;

EID: 0033339605     PISSN: 03769429     EISSN: None     Source Type: Journal    
DOI: 10.1023/A:1018614813353     Document Type: Article

References (45)

1. Babuska, I. and Guo, B.Q. (1992). The h-, p and h-p version of the finite element method; basis theory and applications. Advances in Engineering. Software 15, 159-174.
2. Beghini, M. and Bertini, L. (1990). Fatigue crack propagation through residual stress fields with closure phenomena. Engineering of Fracture Mechanics 3, 379-387.
3. Budiansky, B. and Hutchinson, J.W. (1978). Analysis of closure in fatigue crack growth. Journal of Applied Mechanics 45, 267-276.
4. Bueckner, H.F. (1970). A novel principle for the computation of stress intensity factor. Z. Angew. Math. Mech 50, 529.
5. Cathey, W.H. and Grandt, A.F. Jr. (1980). Fracture mechanics consideration of residual stresses introduced by coldworking fastener holes. Trans. ASME, Journal of Engineering Materials and Technology 102, 85-91.
6. Cruse, T.A. and Besuner, P.M. (1975). Residual life prediction for surface cracks in complex structural details. Journal of Aircraft 12, 369-375.
7. Dill, H.D. and Saff, C.R. (1976). Spectrum crack growth prediction method based on crack surface displacement and contact analyses. ASTM STP 595, 306-319.
8. Dugdale, D.S. (1960). Yielding of steel sheets containing slits. Journal of Mechanics and Physics of Solids 8, 100-104.
9. Elber, W. (1970). Fatigue crack closure under cyclic tension. Engineering of Fracture Mechanics 2, 37-45.
10. Elber, W. (1971). The significance of fatigue crack closure. ASTM STP 486, 230-242.
11. Forman, R.G., Kearney, V.E., and Engle, R.M. (1966). Numerical analysis of crack propagation in cycle-loaded structures. ASME Paper No. 66-WA-MWT-4, American Society of Mechanical Engineers.
12. Fuehring, H. and Seeger, T. (1979). Dugdale crack closure analysis of fatigue cracks under constant amplitude loading. Engineering of Fracture Mechanics 11, 99-122.
13. Glinka, G. (1979). Effect of residual stresses on fatigue crack growth in steel weldments under constant and variable amplitude load. Fracture Mechanics, ASTM STP 677, 198-214.
14. Gurney, T.R. (1968). Fatigue of welded structures, Cambridge University Press.
15. Hsu, T.M., McGee, W.M., and Aberson, J.A. (1978). Extended study of flaw growth at fastener holes. AFFDL-TR-77-83, Air Force Flight Dynamics Laboratory, Wright-Patterson AFB OH.
16. Irwin, G.R. (1960). Plastic zone near a crack and fracture toughness. Proceeding of the 7th Sagamore Conference, P. IV-63.
17. Lin, R., Jaensson, B., Holden, T.M. , Rogge, R.B. and Root, J.H. (1995). Investigation of residual stresses in a sleeve cold worked lug specimen by neutron and X-ray diffraction. Advances in X-Ray Analysis. (Edited by P. Predecki et al.) 38, 455-461, Plenum Press, New York.
18. Lopez M.L. and Korsgren, P. (1993). Characterisation of initial defect distribution and weld geometry in welded fatigue test specimens. Proceeding of the 'Nordic Conference on Fatigue'. (Edited by A.F. Blom), EMAS Publishers, West Midlands, England.
19. Lopez M.L., R. Lin, Wang, D. and Blom, A.F. (1997). Investigation of residual stresses in as-welded and TIG-dressed specimens subjected to static/spectrum loading in 'Welded High-Strength Steel Structures'. (Edited by A.F. Blom), EMAS Publishing, 377-390.
20. Maddox, S.J. (1991). Fatigue strength of welded structures, Abington Publishing, Second Edition.
21. Masubuchi, K. (1980). Analysis of welded structures, Pergamon Press, England.
22. Newman, J.C., Jr. (1974). Finite-element analysis of fatigue crack propagation - including the effects of crack closure. Ph. D. Thesis, Virginia Polytechnic Institute and State University, Blacksburg, Va.,
23. Newman, J.C., Jr. (1982). Prediction of fatigue crack growth under variable-amplitude and spectrum loading using a closure model. ASTM STP 761, 255-277.
24. Newman, J.C., Jr. (1984). A crack opening stress equation for fatigue crack growth. International Journal of Fracture 24, R131-R135.
25. Newman, J.C., Jr. and Edwards, P.R. (1988). Short-crack growth behaviour in an aluminum alloy - an AGARD Cooperative Test Programme, AGARD-R-732, Dec.
26. Niemi, E. (1995). Stress determination for fatigue analysis of welded components. IIW Document XIII-1458-92/XV-797-92. IIW, Abington Publ., UK.
27. Ohji, K., Ogura, K., and Ohkubo, Y. (1975). Cyclic analysis of a propagating crack and its correlation with fatigue crack growth. Engineering of Fracture Mechanics 1, 457-464.
28. Rice, J.R. (1972). Some remarks on elastic crack tip stress fields. International Journal of Solids Structure 8, 751.
29. Rich, D.L. and Impellizzeri, L.F. (1977). Fatigue analysis of cold-worked and interference fit fastener holes. ASTM STP 637, 153-175.
30. Schijve, J., Jacobs, F.A., and Meulman, A.E. (1978). Flight simulation fatigue tests on lugs with holes expanded according to the split sleeve cold work method. NLR Technical Report TR-78131 U. National Aerospace Laboratory NLR.
31. Shen, G. and Glinka, G. (1991). Weight function for a surface semi-elliptical crack in a finite thickness plate. Theoretical Applications of Fracture Mechanics 15, 247-255.
32. Vainshtok, V.A. and Varfolomeyev, I.V. (1988). A complete system of equations of the weight function method for three-dimensional crack problems. International Journal of Fracture 38, R71-74.
33. Wang, G.S. and Gustavsson, A.I. (1987). An analytical model to determine fatigue crack closure stress levels. Technical Report FFAP-H 869. The Aeronautical Research Inst. of Sweden.
34. Wang, G.S. (1991a). Numerical analysis of fatigue crack growth. Ph.D. thesis, Report No. 91-17, The Royal Institute of Technology, Stockholm, Sweden.
35. Wang, G.S. (1991b). Crack surface displacements for Mode I one-dimensional cracks in general two-dimensional geometry. Engineering of Fracture Mechanics 40, 535-548.
36. Wang, G.S. and Blom, A.F. (1991a). A strip model for fatigue crack growth predictions under general load conditions. Engineering of Fracture Mechanics 40, 507-533.
37. Wang, G.S. and Blom, A.F. (1991b). Fatigue crack propagation in residual stress fields. The 6th Inter. Conference on Mechanical Behaviour of Materials. (Edited by Masahiro Jono et al.), Pergamon Press, 29 July-2 August 4, 627-632.
38. Wang, G.S. (1992). Weight function estimation of SIF for Mode I part-elliptical crack under arbitrary load. Engineering of Fracture Mechanics 41, 659-684.
39. Wang, G.S. (1993a). A generalised WF solution for mode I 2D part-elliptical cracks. Engineering of Fracture Mechanics 45, 177-208.
40. Wang, G.S. (1993b). A generalised solution for the crack surface displacement of mode I two-dimensional part-elliptical crack. International Journal of Fracture 59, 161-187.
41. Wang, G.S. (1993c). The plasticity aspect of fatigue crack growth. Engineering of Fracture Mechanics 46, 909-930.
42. Wang, G.S. (1995). A numerical procedure for the approximate WF solution of Mode I SIFs in 3D geometries under arbitrary load. Computational Mechanics 15, 426-442.
43. Wang, G.S. (1996a). To analyse fatigue crack growth in residual stress field at welded joints. Proceeding of the 6th International Fatigue Congress, Fatigue 96. (Edited by G. Lütjering and H. Nowack), Vol. II, 6-10 May, Berlin. 1219-1224.
44. Wang, G.S. (1996b). Analysing the fatigue crack growth in structural details. Engineering of Fracture Mechanics 53, 345-361.
45. Wang, X. and Lambert, X.B. (1995). Local weight functions for semi-elliptical surface cracks in finite thickness plates. Theoretical and Application of Fracture Mechanics 23, 199-208.