Test methods and results for recent outdoor insulation in Japan

IEEE Transactions on Dielectrics and Electrical Insulation

Volumn 6, Issue 5, 1999, Pages 732-743

  Naito, K ^a   Matsuoka, R ^b   Irie, T ^c   Kondo, K ^c  

^a MEIJO UNIVERSITY   (Japan)

^b CHUBU UNIVERSITY   (Japan)

^c NGK INSULATORS LTD   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

ELECTRIC POTENTIAL; OVERHEAD LINES; POLYMERS; SEMICONDUCTOR MATERIALS;

LINE ARRESTERS;

ELECTRIC INSULATION TESTING;

EID: 0033333820     PISSN: 10709878     EISSN: None     Source Type: Journal    
DOI: 10.1109/94.798130     Document Type: Article

References (34)

1. S. Matsui, Y. Suzuki and O. Fujii, "State of the Art of Insulator Technology for Transmission Line in Japan", NGK Review, No. 22, pp. 19-28, 1998.
2. T. Fujimura, "The Evolution of Porcelain Insulator Technology", IEEE EI Magazine, Vol. 11, No. 3, pp. 26-36, 1995.
3. T. Imakoma, K. Sakamoto, S. Ito, K. Skanishi and Y. Utsumi, "Development of 1000 kV Bushing Shell", NGK Review, No. 56, pp. 1-10, 1996 (in Japanese)
4. The Japanese UHV Transmission Demonstration Test Committee Report, "Experimental Study of AC UHV Power Transmission", Report No. Z85803, 1985 (in Japanese)
5. T. Iwama, K. Kito, K. Naito and T. Irie, "Ultra-high Strength Suspension Insulators and Insulator String for UHV Transmission Line", IEEE Trans. on PAS, Vol. 101, No. 10, pp. 3780-3789, 1982.
6. K. Morita, Y. Suzki and H. Nozaki, "Study on Electrical Strength of Suspension Insulators on Steep Impulse Voltage Range", IEEE Trans. on PD, Vol. 12, No. 2, pp. 850-856, 1997.
7. M. Ueda, M. Honda, M. Hosokawa, K. Takahashi and K. Naito, "Performance of Contaminated Bushing of UHV Transmission Systems", IEEE Trans. on PAS, Vol. 104, No. 4, pp. 891-899, 1985.
8. Y. Tanaka, M. Sampei, T. Ono, O. Usuda, Y. Koga, Y. Kuroda, H. Saito, H. Ooi, Y. Nakanishi, K. Fujii and M. Kamiji, "Special Articles Technology of Kii-channel HVDC Interconnection and its Project", OHM, Vol. 1075, No. 1, pp. 44-79, 1999 (in Japanese).
9. T. Fujimura, K. Naito and Y. Suzuki, "DC Flashover Voltage Characteristics of Contaminated Insulators", IEEE Trans. on EI, Vol. 16, No. 3, pp. 189-198, 1981.
10. K. Naito, S. Matsui and Y. Suzuki, "Special Aspects of Insulators for HVDC Transmission Lines and Station", NGK Review, No. 15, pp. 29-42, 1991.
11. J. H. Mason, F. R. Silva Jr. and M. A. Sens, "DC Salt-fog Tests on Glass and Porcelain Cap and Pin Insulators", IEE 5th International Conference on Dielectric Material, Measurement and Applications, pp. 139-142, 1988.
12. K. Naito, R. Matsuoka, S. Ito and S. Morikawa, "An Investigation of the Horizontally Mounted Insulators for HVDC Stations", IEEE Trans. on PD, Vol. 4, No. 1, pp. 653-666, 1989.
13. M. Morita, R. Matsuoka, S. Matsui, Y. Suzuki and Y. Nakashima, "Practical Application of Semiconducting glazed Insulators", International Conference on Electrical Engineering, pp. 719-724, 1996.
14. NGK Technical Report, NGK Semiconducting Glazed Suspension Insulators, No. TN-96002, 1996.
15. H. Nakauchi, T. Kanada, H. Okada and S. Mori, "Aging Characteristics on High Strength Semiconducting Glaze Suspension Insulators", Proceeding of the Annual Conference of Power & Energy Society, IEE of Japan, Paper No. 356, 1998 (in Japanese).
16. T. Kawamura, K. Naito, A. Inoue, T. Yamada, I. Murasawa, Y. Yamamoto, T. Irie and M. Mochizuki, "Experience and Effectiveness of Application of Arresters to Overhead Transmission Lines", CIGRE Session Paper, No. 33-301, 1998.
17. T. Itabashi, K. Osada, T. Seta and K. Naito, "A Study of Short-time AC Flashover Voltage of Contaminated Insulators and a Consideration of its Application to transmission Line Insulation Design", IEEE Trans. on PAS, Vol. 95, No. 5, pp. 1723-1731, 1976.
18. S. Furukawa, O. Usuda, T. Isozaki and T. Irie, "Development and Application of Lightning Arresters for Transmission Lines", IEEE Trans. on PD, Vol. 4, No. 4, pp. 2121-2129, 1989.
19. K. Naito, K. Izumi, K. Takasu and R. Marsuoka, "Performance of Composite Insulators under Polluted Conditions", CIGEE Session Paper, No. 33-301, 1996.
20. R. Matsuoka, M. Ishiwari, H. Shinokubo and K. Kondo, "Field Test Results of Polymer Insulators", 10th ISH, pp. 257-260, 1997.
21. V. Higashimori, Z. Nakao, S. Nishimura, J. X. Zhu, Z. Iha, T. Tamaki, J. Kato, R. Kimata, T. Mugishima and T. Kobayashi, "Studies on Salt Contamination and Leakage Current of Silicone Rubber Insulators", ICEE, pp. 744-748, 1996.
22. H. Imagawa, R. Matsuoka, S. Ito, K. Sakanishi, K. Kondo, N. Okada and T. Yonezawa, "Comparative Contamination Degrees on Porcelain and Silicone Rubber Insulators in Field", NGK Review, No. 21, pp. 48-49, 1997.
23. R. Matsuoka, H. Shinokubo, K. Kondo, Y. Mizuno, K. Naito, T. Fujimura and T. Terada, "Assessment of Basic Contamination Withstand Voltage Characteristics of Polymer Insulators", IEEE Trans. on PD, Vol. 11, No. 4, pp. 1895-1900, 1996.
24. R. G. Houlgate and D. A. Swift, "Polymeric Insulators: ac Flashover Voltage under Artificial Salt-pollution of New and Naturally-aged units Compared to Porcelain", 6th ISH, Paper No. 47-30, 1989.
25. S. S. Low, D. J. Melvold, K. Naito and Y. Imano, "dc Comtamination and Flashover Characteristics of insulators under Naturally Contaminated HVDC Station Post Insulators", Joint IEEE/CSEE Conf. on HV Transmission Systems, Paper No. 76, 1987.
26. I. Urushihara, K. Naito, K. Sakanishi and R. Matsuoka, "A Method of Artificial Contamination Test on Composite Insulators", 8th ISH, Paper No. 47, 10, 1993.
27. A. De. La O, R. S. Gurur and J. Chang, "AC Clean Fog Test on Non-ceramic Insulating Materials and a Comparison with Porcelain", IEEE Trans. on PD, Vol. 9, No. 4, pp. 2000-2008, 1994.
28. K. Naito, T. Kawaguchi, M. Ito, H. Katsukawa and Y. Suzuki, "Influence of Fog Parameters on Withstand Voltage of Contaminated Insulators", IEEE Trans. on PAS, Vol. 102, No. 3, pp. 729-737, 1983.
29. R. Matsuoka, S. Ito, K. Tanaka and K. Kondo, "Contamination Withstand Voltage Characteristics of Polymer Insulators", 10th ISH, pp. 81-83, 1997.
30. I. Gutman, R. Harlings, R. Matsuoka and K. Kondo, "Experience with IEC 1109 1000 h Salt Fog Aging Test for Composite Insulators", IEEE EI Magazine, Vol. 13, No. 3, pp. 36-39, 1997.
31. M. Ieda, M. Kahle, J. H. Mason, T. Orbec and A. W. Stannett, "Testing of High Polymer Insulation for Outdoor Application Review, Analysis and Development", CI-GRE Session Paper, No. 15-11, 1986.
32. R. Matsuoka, I. Nakajima and H. Shinokubo, "Consideration into Accelerated Aging Test Methods for Composite Insulators", 11th International Conf. on Gas Discharges and their Application, 1995.
33. R. Matsuoka, T. Nakamura, H. Shinokubo and K. Kondo, "High Water Pressure Washing Test on Polymer Insulators", NGK Review, No. 19, pp. 24-25, 1995.
34. R. Matsuoka, T. Tanaka, H. Shinokubo and J. T. Burnham, "Damage of Nonceramic Insulator End Fittings by Power Arc Currents", Engineering Safety Maintenance and Operation of Lines, Paper No. 981-C-LI-1, pp. 278-284, 1998.