Fatigue analysis of multiple site damage in lap joint specimens

ASTM Special Technical Publication

Volumn , Issue 1360, 1999, Pages 214-226

  Wang, Hsing Ling ^a   Grandt Jr , Alten F ^a  

^a Purdue University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CRACK PROPAGATION; FAILURE ANALYSIS; FRACTURE MECHANICS; JOINTS (STRUCTURAL COMPONENTS); STRESS ANALYSIS;

LAP JOINTS; LOAD TRANSFER; MULTIPLE SITE DAMAGE;

FATIGUE OF MATERIALS;

EID: 0033331806     PISSN: 10403094     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (27)

1. Swift, T., "Widespread Fatigue Damage Monitoring Issues and Concern," The 5th International Conference on Structural Airworthiness of New and Aging Aircraft, Hamburg, Germany, 16-18 June 1993.
2. Moukawsher, E. J., Grandt, A. F., Jr., and Neussl, M. A., "Fatigue Life of Panels with Multiple Site Damage," Journal of Aircraft, Vol. 33, No. 5, September-October 1996, pp. 1003-1013.
3. Wang, H. L., Buhler, K., and Grandt, A. F., Jr., "Evaluation of Multiple Site Damage in Lap Joint Specimens," Proceedings of the 1995 USAF Structural Integrity Program Conference, ASIP, Vol. 1, August 1996, pp. 21-38.
4. Heinimann, M. B. and Grandt, A. F., Jr., "Analysis of Stiffened Panel with Multiple Site Damage," Proceedings of the 1996 USAF Structural Integrity Program Conference, San Antonio, TX, 3-5 Dec. 1996.
5. Grandt, A. F., Jr., Sexton, D. G., Golden, P. J., Bray, G. H., Bucci, R. J., and Kulak, M., "A Comparison of 2024-T3 and 2524-T3 Aluminum Alloys under Multi-Site Damage Scenarios," ICAF 97 Fatigue in New and Aging Aircraft, Vol. II, Poster Papers, R. Cook, and P. Poole, Eds., Proceedings of the 19th ICAF Symposium, International Committee on Aeronautical Fatigue, 18-20 June 1997, Edinburgh, Scotland, pp. 659-669.
6. Heinimann, M. B. and Grandt, A. F., Jr., "Fatigue Analysis of Stiffened Panels with Multiple Site Damage," First Joint DoD/FAA/NASA Conference on Aging Aircraft, Ogden, Utah, 8-10 July 1997.
7. Wang, H. L., "Evaluation of Multiple Site Damage in Lap Joint Specimens," Ph.D. thesis, School of Aeronautics and Astronautics, Purdue University, West Lafayette, IN, December 1998.
8. Beuth, J. L. and Hutchinson, J. W., "Fracture Analysis of Multiple Site Cracking in Fuselage Lap Joints," Durability of Metal Aircraft Structures, Proceedings, International Workshop on Structural Integrity of Aging Airplane, Atlanta, GA, 31 March-2 April 1992, Atlanta Technology Publications, 1992.
9. Beuth, J. L. and Hutchinson, J. W., "Fracture Analysis of Multi-Site Cracking in Fuselage Lap Joints," Computational Mechanics, Vol. 13, 1994, pp. 315-331.
10. Lee, E. U., "Effect of Load Transfer on Fatigue of Mechanically Fastened Metallic Joints," Fatigue in Mechanically Fastened Composite and Metallic Joints, ASTM STP 927, Philadelphia, 1986, pp. 95-117.
11. Huth, H., "Influence of Fastener Flexibility on the Prediction of Load Transfer and Fatigue Life for Multiple-Row Joints," Fatigue in Mechanically Fastened Composite and Metallic Joints, ASTM STP 927, Philadelphia, 1986, pp. 221-250.
12. Rich, D. L. and Impellizzeri, L. F., "Fatigue Analysis of Cold-Worked and Interference Fit Fastener Holes," Cyclic Stress-Strain and Plastic Deformation Aspects of Fatigue Crack Growth, ASTM STP 637, ASTM, Philadelphia, 1977, pp. 153-175.
13. Singh, R., Park, J. H., and Atluri, S. N., "Growth of Multiple Cracks and Their Linkup in a Fuselage Lap Joint," AIAA Journal, Vol. 32, No. 11, November 1994, pp. 2261-2268.
14. Sampath, S. and Broek, D., "Estimation of Requirements of Inspection Intervals for Panels Susceptible to Multiple Site Damage," Structural Integrity of Aging Airplanes, Springer-Verlag, Berlin, Heidelberg, 1991, pp. 339-389.
15. Vleiger, H., "Results of Uniaxial and Biaxial Tests on Riveted Fuselage Lap Joint Specimens," FAA/NASA International Symposium on Advanced Structural Integrity Methods for Airframe Durability and Damage Tolerance, 4-6 May 1994, Hampton, VA.
16. Kamei, A. and Yokobori, T., "Two Collinear Asymmetrical Elastic Cracks," Report of the Research Institute for Strength and Fracture of Materials, Tohoku University, Vol. 10, Section 1-4, December 1974, pp. 41-42.
17. Barrois, W., "Stress and Displacements Due to Load Transfer by Fasteners in Structural Assemblies," Engineering Fracture Mechanics, 1978, Vol. 10, pp. 115-176.
18. Muller, R. P. G., "An Experimental and Analytical Investigation on the Fatigue Behavior of Fuselage Riveted Lap Joints - The Significant of the Rivet Squeeze Force and a Comparison of 2024-T3 and Glare 3," Ph.D. dissertation, Delft University of Technology, Faculty of Aerospace Engineering Structures and Materials Laboratory, The Netherlands.
19. Grandt, A. F., Jr. and Sinclair, G. M., "Stress Intensity Factors for Surface Cracks in Bending," Stress Analysis and Growth of Cracks, Proceedings of the 1971 National Symposium on Fracture Mechanics, Part I, ASTM STP 513, Philadelphia, 1972, pp. 37-58.
20. Fatigue Crack Growth Computer Program "NASA/FLAGRO" Version 2.0, Appendix C, December 1992.
21. Hsu, Y. C. and Forman, R. G., "Elastic-Plastic Analysis of an Infinite Sheet Having a Circular Hole Under Pressure," Journal of Applied Mechanics, June 1975, pp. 347-352.
22. Cathey, W. H. and Grandt, A. F., Jr., "Fracture Mechanics Consideration of Residual Stresses Introduced by Coldworking Fastener Holes," Journal of Engineering Materials and Technology, January 1980, Vol. 102, pp. 85-91.
23. Kullgren, T. E. and Grandt, A. F., Jr., "Tabulated Stress Intensity Factor Solutions for Flawed Fastener Holes," Engineering Fracture Mechanics, Vol. 18, No. 2, 1983, pp. 435-451.
24. Standard Aircraft Handbook, 5th ed., L. Reithmaier, Ed., originally compiled and edited by S. Leavell and S. Bungay, TAB/AERO, Division of McGraw-Hill, Inc., Blue Ridge Summit, PA.
25. Military Handbook, Metallic Materials and Elements for Aerospace Vehicle Structures, MIL-HDBK-5G, 1 Nov. 1994.
26. Schijve, J., "Some Elementary Calculations on Secondary Bending in Simple Lap Joints," NLR TR 72036 U, 1972.
27. Newman, J. C., Jr., Harris, C. E., James M. A., and Shivakumar, K. N., "Fatigue-Life Prediction of Riveted Lap-Splice Joints Using Small-Crack Theory," ICAF 97 Fatigue in New and Aging Aircraft, Vol. I, Poster Papers, R. Cook, and P. Poole, Eds., Proceedings of the 19th ICAF Symposium, International Committee on Aeronautical Fatigue, 18-20 June 1997, Edinburgh, Scotland, pp. 523-552.