Phase separation at T junctions

Multiphase Science and Technology

Volumn 11, Issue 4, 1999, Pages 223-329

  Azzopardi, B J ^a  

^a UNIVERSITY OF NOTTINGHAM   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

FLOW PATTERNS; MATHEMATICAL MODELS; PHASE SEPARATION; PIPE FLOW;

FLOW SPLIT; PHASE MALDISTRIBUTION; T-JUNCTIONS;

TWO PHASE FLOW;

EID: 0033331596     PISSN: 02761459     EISSN: None     Source Type: Journal    
DOI: 10.1615/MultScienTechn.v11.i4.10     Document Type: Article

References (181)

1. Ageev, A.G., Babin, V.D., Dubovskii, V.B., Grtsyna, V.P., Kol'chugin, B.A., Osokin, G.V. and Tikhonenko, L.K. (1987), "An investigation of hydrodynamics of two-phase flow in a tee", Therm. Eng., 9, pp 502-504.
2. Anderson, J.L. and Owca, W.C. (1985), "Data report for the Tpfl Tee/critical flow experiments", NUREG/CR-4164., EGG-2377.
3. Anderson, J.L. (1987), "Entrainment and pull through phenomena at T-junction", AIChE Annual Meeting, New York City, NY, USA, November 15-20.
4. Arirachakaran, S. (1990), "Two-phase flow splitting phenomenon at a regular horizontal side-arm tee", PhD Thesis, University of Tulsa.
5. Armstrong, K.F., Parrott, S.D., Soliman, H.M., Sims, G.E. and Krishnan, V.S. (1991), "Theoretical and experimental study of the onset of liquid entrainment during dual discharge from large reservoirs", Int. J. Multiphase Flow, 18, pp 217-227.
6. Asali, J.C., Hanratty, T.J. & Andreussi, P. (1985), "Interfacial drag and film height for vertical annular flow", AIChE J, 31, pp 895-902.
7. th Multiphase Flow Symposium, '97 Lake Toya, pp 103-104.
8. Azzopardi, B.J. (1984), "The effect of side arm diameter on two phase flow split at a T junction", Int. J. Multiphase Flow, 10, pp 509-512.
9. Azzopardi, B.J. (1986), "Two-phase flows in junctions", in Encyclopedia of Fluid Mechanics, Gulf (Edited by N. Cheremsinoff), 3, Chapter 25, pp 677-713.
10. Azzopardi, B.J. (1988), "Measurements and observations of the split of annular flow at a vertical T junction", Int. J. Multiphase Flow, 14, pp 701-710.
11. Azzopardi, B.J. (1989), "The split of annular-mist flows at vertical and horizontal Ts", Proc. Eighth Int. Conf. on Offshore Mechanics and Arctic Engineering, The Hague, Netherlands, 19-23 March, ASME
12. Azzopardi, B.J. (1991a), "Liquid distribution in venturi scrubbers- The importance of liquid films on the channel walls", Chem. Eng. Sci., 48, pp 2807-2813.
13. Azzopardi, B.J. (1993b), "T-junctions as phase separators for gas liquid flows: possibilities and problems", Trans. I. Chem. E., 71A, pp 273-281.
14. Azzopardi, B.J. (1994), "The split of vertical annular flow at a large diameter T junction ", Int. J. Multiphase Flow, 20, pp 1071-1083.
15. Azzopardi, B.J. (1996), "Prediction of dryout and post-burnout heat transfer with axially non-uniform heat input by means of an annular flow model", Nucl. Eng. Des., 163, pp 51-57.
16. Azzopardi, B.J., (1997), "Drops in annular two-phase flow", Int. J. Multiphase Flow, 23, pp S1-S53.
17. Azzopardi, B.J. (1999), "The effect of side arm diameter on phase split at T-junctions", SPE Annual Technical Conference and Exhibition, Houston, October.
18. Azzopardi, B.J. and Whalley, P.B. (1982), "The effect of flow pattern on two phase flow in a T junction", Int. J. Multiphase Flow, 8, pp 481-507.
19. Azzopardi, B.J., Purvis, A. and Govan, A.H. (1987), "Annular two-phase flow split at an impacting T", Int. J. Multiphase Flow, 13, pp 605-614.
20. Azzopardi, B.J., Purvis, A. and Govan, A.H. (1988), "Flow split of churn flow at a vertical impacting T", Int. J. Eng. Fluid Mech., 1, pp 320-329.
21. Azzopardi B.J. and Memory, S.B. (1989), "The split of two-phase flow at a horizontal T - annular and stratified flow", 4th Int. Conf. on Multi-phase Flow, Nice, France, 19-21 June (Pub. BHRA)
22. Azzopardi, B.J. and Smith, P.A. (1992), "Flow split at a T junction: effect of side arm orientation and downstream geometry", Int. J. Multiphase Flow, 18, pp 861-875.
23. Azzopardi, B.J. and Hervieu, E. (1994), "Phase separation at junctions", Multiphase Science and Technology, 8, pp 645-714.
24. Azzopardi, B.J. and Teixeira, J.C.F. (1994), "Detailed measurements of vertical annular two phase flow - Part I: drop velocities and sizes", Trans ASME, J. Fluids Eng., 116, pp 792-795.
25. Azzopardi, B.J., Erlebach, C.B. and Roberts, P.A. (1994), "Dividing churn/slug flow at a vertical T-junction", 10th Int. Heat Transfer Conf., Brighton, August.
26. Azzopardi, B.J. and Zaidi, S.H. (1998), "Drop sizes and velocities in annular two-phase flow", Proc ILASS'98, pp 153-158.
27. Azzopardi, B.J. and Rea, S. (1999), "Modelling the split of horizontal annular flow at a T-junction", Trans. I. Chem. E., 77A, pp. 713-720.
28. Ballyk, J.D., Shoukri, M. and Chan, A.M.C. (1988), "Steam-water annular flow in a horizontal dividing T-junction", Int. J. Multiphase Flow, 14, pp 265-285.
29. Ballyk, J.D. and Shoukri, M. (1990), "On the development of a model for predicting phase separation phenomena in dividing two-phase flow", Nucl. Eng. and Des., 123, pp 67-75.
30. Banerjee, S., Rhodes, E. and Scott, D.S. (1967), "Film inversion of co-current two-phase flow in helical coils", AIChEJ, 13, pp. 189-191.
31. Bergman, D.F., Rasin Tek, M. and Katz, D. L. (1975), "Retrograde condensation in natural gas pipelines", American Gas Association, Pipelines Research Committee Project Report PR 26-69.
32. Bestion, D. and Lemonnier, H. (1989), "State of the art of two-phase steam water flow in piping junctions", CENG/SETh/LEML-EM/89-185.
33. Bos, A. and du Chatinier, J.G. (1985), "Simulation of gas liquid flow in slug catchers", Symposium on Pipelines, Utrecht, The Netherlands, Inst. Chem. Engrs..
34. Boulanger, F. (1991), "Pertes de pression dans un te parcouru par un ecoulement diphasique a bulles". These de Doctorat, Ecole Centrale (Paris), France.
35. Boulanger, F. and Lemonnier, H. (1992), "An analysis of Two-phase pressure drop at a tee-junction by two-dimensional modelling and experiments", to be presented at the 28th National Heat Transfer Conf., San Diego, August 9-12.
36. Buell, J. R., Soliman, H. M. and Sims, G. E. (1994), Two-phase pressure drop and phase distribution at a horizontal tee junction. Int. J. Multiphase Flow, 20, pp 819-836.
37. Butterworth, D., (1973), "An analysis of film flow for horizontal flow and condensation in a horizontal tube", UKAEA Report AERE R7575.
38. Butterworth, D. and Pulling, D.J., (1972), "A visual study of mechanisms in horizontal annular, air-water flow", UKAEA Report AERE M2556.
39. Butterworth, D. and Pulling, D.J., (1973), "Film flow and film thickness measurements for horizontal annular air-water flow", UKAEA Report AERE R7576.
40. Butterworth, D., 1980, Unresolved problems in heat exchanger design. Interflow 80 - The Fluid Handling Conference, Harrowgate.
41. Chadwick, M.A. (1965), "100 MW(e) protype steam generating heavy water reactor refuelling machine test rig", The British Ship Research Association, Marine Engineering Contract Report no. W.37.
42. Charron, Y. and Whalley, P.B. (1995), "Gas-liquid annular flow at a vertical tee junction - part I. Flow separation", Int. J. Multiphase Flow, 21, pp 569-589.
43. Chien, S.F. and Rubel, M.T. (1992), "Phase splitting of wet steam in annular flow through a horizontal impacting tee", SPE Production Engineering, Nov, pp 368-374.
44. Chien, S.F. (1996), "Phase splitting of wet steam in annular flow through a horizontal branching tee", SPE Production & Facilities, May, pp 83-88.
45. Chisholm, D. (1972), "An equation for velocity ratio in two-phase flow", N.E.L.Report No. 535.
46. Collier, J.G. (1976), "Single-phase and two-phase behaviour in primary circuit components", Proc. N.A.T.O. Advanced Study Institute on Two-phase Flow and Heat Transfer, Istanbul, Turkey, Hemisphere, Washington, D.C., pp 322-333.
47. nd Int. Symp. on Two-phase Flow Modelling and Experimentation, Pisa, 23-26 May.
48. Dallman, J.C., Jones, B.G. & Hanratty, T.J. (1979), "Interpretation of entrainment measurements in annular gas-liquid flow", Two-phase Momentum Heat and Mass Transfer (Ed. F. Durst, G.V. Tsiklauri &N.H. Afgan), Hemisphere, Washington, DC, 2, 681-693.
49. Davis, M.R. and Fungtamasan, B. (1990), "Two-phase flow through pipe junctions", Int. J Multiphase Flow, 16, pp 799-817.
50. El Dessouky, H. (1995), "Non-equilibrium two-phase flow in a horizontal T-junction", Chem. Eng. Comm., 134, pp 211-230.
51. Fairhurst, C.P. (1986), "Two-phase flow distributions in branching systems", BHRA, Report, Cranfield, UK.
52. Fisher, S.A. and Pearce, D.L. (1978), "A theoretical model for describing horizontal annular flows", Presented at Int. Semin, on Momentum, Heat and Mass Transfer in Two-Phase Energy and Chemical Systems, Dubrovnik, Yugoslavia.
53. Fisher, S.A. and Pearce, D.L. (1993), "An annular flow model for predicting liquid carryover into austenitic superheaters", Int. J. Multiphase Flow, 19, pp 295-307.
54. Flores, A.G., Crowe, K.E. and Griffith, P. (1995), "Gas-phase secondary flow in horizontal stratified and annular two-phase flow", Int. J. Multiphase Flow, 21, pp 207-221.
55. Fryar, J.R. (1980), "Options are available for pipeline and compressor-station drip design", Oil and Gas J., 78, Mar 31, pp 154-161.
56. Fore, L.B. and Dukler, A.E. 1995 The distribution of drop size and velocity in gas-liquid annular flow. Int. J. Multiphase Flow, 21, pp 137-149.
57. Fortuin, J.M.H., Hamersma, P.J. and Hart, J. (1991), "Experiments verify predictions of condensate movements", Oil and Gas J., Jan 28, pp 91-93.
58. Fouda, A.E. and Rhodes, E. (1972), "Two-phase annular flow stream division", Trans. Inst. Chem. Engrs., 50, pp 353-363.
59. Fouda, A.E. and Rhodes, E. (1974), "Two-phase annular flow stream division in a simple tee", Trans. Inst. Chem. Engrs., 52, pp 354-360.
60. Fouda, A.E. (1975) "Two-phase flow behaviour in manifolds and networks", PhD Thesis, University of Waterloo, Canada.
61. nd Int. Conf. on Multiphase Flow, Kyoto, 3, pp P6-27-P6-32.
62. th Multiphase Flow Symposium, '96 Fukui, pp 61-64.
63. Fukano, T. and Ousaka, A. (1989), "Prediction of the circumferential distribution of film thickness in horizontal and near-horizontal gas-liquid annular flow", Int. J Multiphase Flow, 15, pp 403-419.
64. Gardel, A. (1957), "Les pertes de charge dans les ecoulementes au travers de branchements en te", Bulletin Technique de la Suisse Romande, 9, pp 122-130 and 10, pp 143-148.
65. Gardel, A. (1957), "Les pertes de charge dans les ecoulementes au travers de branchements en te", Bulletin Technique de la Suisse Romande, 9, pp 122-130 and 10, pp 143-148.
66. Gardel, A. and Rechsteiner, G.F. (1957), "Les pertes de charge dans les branchements en te des conduites circulaires", Bulletin Technique de la Suisse Romande, 25, pp 363-391.
67. Hart, J., Hamersma, P.J. and Fortuin, J.M.H. (1989), "Correlations predicting frictional pressure drop and liquid holdup during horizontal gas-liquid pipe flow with a small liquid holdup", Int. J. Multiphase Flow, 15, pp 947-964.
68. Hart, J., Hamersma, P.J. and Fortuin, J.M.H. (1991a), "A model for predicting liquid route preference during gas-liquid flow through horizontal branched pipelines", Chem. Eng. Sci., 46, pp 1609-1622.
69. Hart, J., Hamersma, P.J. and Fortuin, J.M.H. (1991b), "Phase distribution during gasliquid flow through horizontal dividing junctions", Nucl. Eng. and Des., 126, pp 293-312.
70. Hassan, I.G., Soliman, H.M., Sims, G.E. and Kowalski, J.E. (1998), "Two-phase flow through a small side branch", Trans. ASME, J. Fluid Eng., 120, pp 605-612.
71. Hatziavramidis, D., Sun, B. and Gidaspow, D. (1997), "Gas-liquid flow through horizontal tees of branching and impacting type", A.I.Ch.E.J., 43, pp 1675-1683.
72. Henry, J.A.R. (1981), "Dividing annular flow in a horizontal tee", Int. J. Multiphase Flow, 1, pp 343-355.
73. Henstock, W.H. & Hanratty, T.J. (1976), "The interfacial drag and height of the wall layer in annular flows", AIChE J, 22, pp 990-1000.
74. Hervieu, E. (1988), "Ecoulement monophasique et diphasique a bulles dans un branchement en te: etude theorique et experimentale", These de Doctorat de l'Institut National Polytechnique de Grenoble, France.
75. Hewitt, G.F. and Govan, A.H. (1990), "Phenomenological modelling of non-equilibrium flows with phase change", Int. J. Heat & Mass Transfer, 33, pp 229-242.
76. Hewitt, G.F., Gill, L.E., Roberts, D.N. and Azzopardi, B.J. (1990), "The split of low inlet quality gas/liquid flow at a vertical T - Experimental data", UKAEA Report AERE M3801.
77. Hill, P.G. (1967), "Incompressible jet mixing in converging diverging axisymmetric ducts", TASME, J. Basic Engng., 89, pp 161-186.
78. Honan, T.J. and Lahey, R.T. (1981), "Measurement of phase separation in wyes and tees", Nucl. Eng. and Des., 64, pp 93-102.
79. Hong, K.C. (1978), "Two-phase flow splitting at a pipe tee", J. Pet. Technol., pp 290-296.
80. Hong, K.C. and Griston, S. (1995), "Two-phase flow splitting at an impacting tee", SPE Production & Facilities, Aug, pp 184-190.
81. Hoogerndoorn, C.J. and Welling, W.A. (1965), "Experimental studies on the characterisitics of mist flow in horizontal pipes", Symposium on Two-phase Flow, Exeter, 21-23 June, Paper C3.
82. Hurlburt, E.T. (1997), "Modeling of the evaporation and condensation of zeotropic refrigerant mixtures in horizontal annular flow", PhD Thesis, University of Illinois, Urbana.
83. Hwang, S.T., Soliman, H.M. and Lahey, R.T. (1988), "Phase separation in dividing two-phase flow", Int. J Multiphase Flow, 14, pp 439-458.
84. Hwang, S.T., Soliman, H.M. and Lahey, R.T. (1989), "Phase separation in impacting wyes and tees", Int. J Multiphase Flow, 15, pp 965-975.
85. Hwang, S.T. and Lahey, R.T. (1988), "A study on single-and Two-phase pressure drop in branching conduits", Exp. Thermal and Fluid Sci., 1, pp 111-125.
86. Issa, R.I. and Oliveira, P.J. (1994), "Numerical prediction of phase separation in two-phase flow through T-junctions", Computers Fluids, 23, pp 347-372.
87. Ito, H. and Imai, K., (1973), Energy losses at 90° pipe junctions. J. Hyd. Div., ASCE, 99, pp 1353-1368.
88. James, P.W., Wilkes, N.S. Conkie, W. and Burns, A. (1987), "Developments in the modelling of horizontal annular two-phase flow", Int. J. Multiphase Flow, 13, pp 173-198.
89. James, P.W., Azzopardi, B.J., Graham, D.I. and Sudlow, C.A. (1999), Int. J. Multiphase Flow.
90. Jayanti, S. Wilkes, N.S. Clarke, D.S. and Hewitt, G.F. (1990), "The prediction of turbulent flows over roughened surfaces and its application to interpretation of mechanisms of horizontal annular flow", Proc. Roy. Soc., A431, pp 71-88.
91. Jepson, W.P. (1988), "Liquid film thickness variation in horizontal annular flow in large diameter pipes", AERE Report R12991.
92. Johansen, S.E. (1979), "Experimental study of gas-liquid flow in a pipe tee", M.S. Thesis, University of Tulsa.
93. Johnston, A.J. (1988a), "An investigation into stratified co-and countercurrent two-phase flow", SPE Production Engineering, August, pp 393-399.
94. Johnston, A.J. (1988b), "Controlling effects in countercurrent two-phase flow", SPE Production Engineering, August, pp 400-404.
95. Kalkach-Navarro, S., Lee, S.J. and Lahey, R.T. (1990), "An analysis of two-phase pressure drop in branching conduits using a two-fluid model", Trans. Am. Nucl. Soc., 56, pp 392-394.
96. Kalkach-Navarro, S., Lee, S.J., Lahey, R.T. and Drew, D.A. (1990), "The prediction of phase separation in a branching conduit using a three dimensional two-fluid model",
97. Katsaounis, A., Furst, H.D., Kuhns, M. and Schultheiss, G.F. (1986), "Investigation of single-and two-phase flow pressure drop in T-junctions", Atomkenergie-Kerntechnik, 48, pp 27-31.
98. Katsaounis, A. (1987), "Flow pattern and pressure drop in tees", Chem. Eng. Commun., 54, pp 119-138.
99. th World Conf. on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Brussels (Ed. M.Giot, F. Mayinger and G.-P. Celata) Pub Edizione ETS. pp 1045-1052.
100. Katz, S. (1967), "Mechanical potential drops at a fluid branch", Trans ASME, ,pp 732-736.
101. Kimpland, R.H., Lahey, R.T., Azzopardi, B.J. and Soliman, H.M. (1992), "A contribution to the predictions of phase separation in branching conduits", Chem. Eng. Comm., 111, pp 79-105.
102. Kolnes, J. and Asheim, H. (1990), "New offshore slug catcher design", Int. Conf. on Basic Principles & Industrial Applications of Multiphase Flow, London, 24-25 April.
103. Lahey, R.T., Azzopardi, B.J. and Cox, M. (1985), "Modelling two-phase flow division at T-junctions", 2nd. Int. Conf. Multi-Phase Flow, London, U.K., 19-21 June, pub.,BHRA.
104. Lahey, R.T. (1986), "Current understanding of phase separation mechanisms in branching conduits", Nucl. Engng. Des., 55, pp 145-161.
105. Lahey, R.T. (1990), "The analysis of phase separation and phase distribution phenomena using two-fluid models", Nucl. Eng. and Des., 122, pp 17-40
106. Laurinat, J.E., Hanratty, T.J. and Jepson, W.P. (1985), "Film thickness distribution for gas-liquid annular flow in a horizontal pipe", Phys. Chem. Hydrodynam. 6, pp 179-195.
107. Lemonnier, H. and Hervieu, E. (1991), "Theoretical modelling and experimental investigation of single-phase and two-phase division at a tee junction", Nucl. Eng. and Des., 125, pp 201-213.
108. Lightstone, L., Osamusali, S.I. and Chang, J.-S. (1991), "Gas-liquid two-phase flow in symmetrically dividing horizontal tubes", A.I.Ch.E.J., 37, pp 111-122.
109. nd Int. Conf. On Multiphase Flow and Heat Transfer, Xi'an PRC, 1, pp 40-47.
110. Ma, Y.-P., Pei, B.-S., Lin, W.-K. and Hsu, Y.-Y. (1990), "Analysis of a fluid mechanic model of a horizontal tee-junction", Nucl. Tech., 92, pp 134-140.
111. Marti, S. and Shohham, O. (1997), "A unified model for stratified-wavy two-phase flow splitting at a reduced T junction with an inclined branch", Int. J. Multiphase Flow, 23, pp 725-748.
112. McCreery, G.E. (1984), "A correlation for phase separation in a tee", Multi-phase Flow and Heat Transfer III. Part B: Applications, pub. Elsevier Science Pub. B.V., Amsterdam (Ed. T.N. Veziroglu and A.E. Bergles), pp 165-178.
113. McCreery, G.E. and Banerjee, S. (1990), "Phase separation of dispersed mist and dispersed annular (rivulet or thin film) flow in a tee - I: Experiments", Int. J. Multiphase Flow, 16, pp 429-445.
114. McCreery, G.E. and Banerjee, S. (1991), "Phase separation of dispersed mist and dispersed annular (rivulet or thin film) flow in a tee - II: Analysis", Int. J. Multiphase Flow, 17, pp 309-325.
115. McNown, J.S. and Hsu, E.-N. (1951), "Application of conformal mapping to divided flow", Proc. of the midwestern conf. on Fluid Dynamics. State Univ. of Iowa, reprint 96, pp 143-155.
116. McNown, J.S. (1954), "Mechanics of manifold flow", ASCE Trans., 119, pp 1103-1142.
117. McQuillan, K.W. and Whalley, P.B. (1984), "The effect of orifices on the liquid distribution in annular two-phase flow", Int. J. Multiphase Flow, 10, pp 721-730.
118. McQuillan, K.W. and Whalley, P.B. (1985a), "A comparison between flooding correlations and experimental flooding data for gas-liquid flow in vertical circular tubes", Chem. Eng. Sci., 40, pp 1425-1440.
119. th Int. Topical Meeting on Nuclear Reactor Thermal-Hydraulics, Karlsruhe, 2, pp 1024-1030.
120. Mols, B. & Oliemans, R.V.A. (1998), "A turbulent diffusion model for particle dispersion and deposition in horizontal tube flow", Int. J. Multiphase Flow, 24, pp 77-92.
121. Mudde, R.F., Groen, J.S. and van den Akker, H.E.A. (1993), "Two-phase flow redistribution phenomena in a large T-junction", Int. J. Multiphase Flow, 19, pp 563-573.
122. st Int Conf. Multiphase Flows, Tsukuba, Japan, September 24-27.
123. Oranje, L. (1973), "Condensate behaviour in gas pipelines is predictable", Oil & Gas J., 71, pp 39-44.
124. Oranje, L. (1983), "Handling two-phase-condensate flow in offshore pipeline systems", Oil and Gas J., 81, pp 128-138.
125. Ottens, M., de Swart, A., Hoefsloot, H.C.J. and Hammersma, P.J. (1995), "Gas-liquid flow splitting in regular, reduced and impacting T-junctions", Impiantistica Italiana, 8, pp 23-33.
126. Ottens, M. (1998), "Gas-liquid flow through pipes and T-junctions", PhD Thesis, Delft University of Technology.
127. Ottens, M., Hoefsloot, H.C.J. and Hammersma, P.J. (1999), "Effect of small branch orientation on gas-liquid flow separation in T junctions", AlChEJ, 45, pp. 465-474.
128. Parrott, S.D., Soliman, H.M., Sims, G.E. and Krishnan, V.S. (1991), "Experiments on the onset of gas pull-through during dual discharge from a reservoir", Int. J. Multiphase Flow, 17, pp 119-129.
129. Peng, F., Shoukri, M. and Chan, A.M.C. (1996), "The effect of branch orientation on annular two-phase flow", Trans ASME, J. Fluids Eng., 118, 166-171.
130. Peng, F. and Shoukri, M. (1997), "Modelling of phase redistribution of horizontal annular flow divided in T-junctions", Can. J. Chem. Eng., 75, pp 264-271.
131. rd Int. Conf. On Multiphase Flow, Lyon, France, June 8-12.
132. Penmatcha, R., Ashton, P.J.N. and Shoham, O. (1996), "Two-phase flow splitting at a tee junction with an inclined branch", Int. J. Multiphase Flow, 22, pp 1105-1122.
133. Popp, M. and Sallet, D.W. (1983), "Experimental investigation of one and two-phase flow through a tee-junction", Paper B3, Int. Conf. on the Physical Modelling of Multiphase flow, Coventry, England, April 19-21.
134. Rea, S. and Azzopardi, B.J. (2000), "The split of horizontal stratified flow at a large diameter T-junction", submitted for publication.
135. Reimann, J. and Khan, M. (1984), "Flow through a small break at the bottom of a large pipe with stratified flow", Nucl. Sci. Eng., 88, pp 297-310.
136. Reimann, J. and Seeger, W. (1986), "Two-phase flow in a T-junction with a horizontal inlet - Part II: pressure differences", Int. J. Multiphase Flow, 12, pp 587-608.
137. Reimann, J. (1987), "A new gas separator for stratified and slug flow", 3rd Int. Conf. on Multiphase Flow, The Hague, The Netherlands, 18-20 May, pub., BHRA.
138. Reimann, J., Brinkmann, H.J. and Domanski, R. (1988), "Gas-liquid flow in dividing tee-junction with horizontal inlet and different branch orientations and diameters", Kernforschungszentrum Karlsruhe, Institute fur Reaktorbauelemente Report KfK 4399.
139. Roberts, P.A. (1994), "Two-phase flow at T-junctions", PhD Thesis, Nottingham University.
140. Roberts, P.A., Azzopardi, B.J. and Hibberd, S. (1995), "The split of horizontal semiannular flow a large diameter T-junction", Int. J. Multiphase Flow, 21, pp 455-466.
141. Roberts, P.A. and Hibberd, S. (1996), "Internal hydraulic jumps at T-junctions", J. Fluid Mech., 314, pp 331-347.
142. Roberts, P.A., Azzopardi, B.J. and Hibberd, S. (1997), "The split of horizontal annular flow a T-junction", Chem. Eng. Sci., 52, pp 3441-3453.
143. Rubel, M.T., Soliman, H.M. and Sims, G.E. (1988), "Phase distribution during steam-water flow in a horizontal T-junction", Int. J. Multiphase Flow, 14, pp 425-438.
144. Rubel, M.T., Timmerman, B.D., Soliman, H.M., Sims, G.E. and Ebadian, M.A. (1988), "Phase distribution of high-pressure steam-water flow at a large diameter tee junction", Trans ASME, J. Fluids Eng, 116, pp 592-598.
145. Saba, N. and Lahey, R.T. (1982), "Phase separation phenomena in branched conduits", NUREG/CR-2590.
146. Saba, N. and Lahey, R.T. (1984), "The analysis of phase separation phenomena in branched conduits", Int. J. Multiphase Flow, 10, pp 1-20.
147. th Int. Heat Transfer Conf., San Franciso, pp 2307-2311.
148. Seeger, W., Reimann, J. and Muller, U. (1986), "Two-phase flow in a T-junction with a horizontal inlet - Part II: phase separation", Int. J. Multiphase Flow, 12, pp 575-586.
149. Seeger, W. (1986), "Untersuchungen zum Druckabfall und zur Massenstromumvertielung von Zweiphasenstromungen in rechtwinklingen Rohrverzweigungen", KfK 3876.
150. Shoham, O., Brill, J.P. and Taitel, Y. (1987), "Two-phase flow splitting in a Tee junction - experiment and modelling", Chem. Eng. Sci., 42, pp 2667-2676.
151. Shoham, O., Arirachakaran, S. and Brill, J. P. (1989), "Two phase flow splitting in a horizontal reduced pipe tee", Chem. Eng. Sci., 44, pp 2388-2391.
152. Skorek, T. (1995), "Modelling of two-phase flow in dividing T-junctions with horizontal inlet pipe", Two-phase Flow Modelling and Experimentation 1995 (Ed. G.P. Celata and R.K. Shah), Editizione ETS, pp 339-346.
153. Skorek, T. (1999), "Modelling of two-phase flow in dividing T-junctions with horizontal inlet pipe", Two-phase Flow Modelling and Experimentation 1999 (Ed. G.P. Celata and R.K. Shah), Editizione ETS, pp 803-810.
154. Sliwicki, E. and Mikielewicz, J. (1988), "Analysis of an annular-mist flow model in a T-junction", Int. J. Multiphase Flow, 14, pp 321-331.
155. Sliwicki, E. (1992), "Two-phase flow distribution in brandling conduits", private communication.
156. Smoglie, C. and Reimann, J. (1986), "Two-phase flow through small branches in a horizontal pipe with stratified flow", Int. J. Multiphase Flow, 12, pp 609-626.
157. Smoglie, C., Reimann, J. and Muller, U. (1987), "Two-phase flow through small breaks in a horizontal pipe with stratified flow", Nucl. Eng. Des., 99, pp 117-130.
158. Soliman, H.M. and Ebadian, M.A., (1994), "Correlation of the two-phase pressure drops in horizontal tee junctions. In Contributed Papers in Fluids Engineering, ASME FED 182 pp 65-73.
159. Stacey, T., Azzopardi, B.J. and Conte, G. (2000), "The split of annular two-phase flow at a small diameter T-junction" accepted by Int. J. Multiphase Flow.
160. Sutharshan, B., Kawaji, M. and Ousaka, A. (1995), "Measurement of circumferential and axial film velocities in horizontal annular flow", Int. J. Multiphase Flow 21, pp 193-206.
161. Suu, T. (1992), "Air-water two-phase flow through a pipe junction (effect of the Reynolds number on the local void fraction distribution", JSME Int. J. Ser. II, 35, pp 76-81.
162. Taitel, Y. and Dukler, A.E. (1976), "A model for predicting flow regime transitions in horizontal and near-horizontal gas-liquid flow", AlChEJ, 22, pp 47-55.
163. Teyssandier, R.G. and Wilson, M.P. (1974), "An analysis of the flow through sudden enlargements in pipes", J. Fluid Mech., 64, pp 85-95.
164. Trick, M. and Mogensen, A.C. (1998), "Measurements of gas-condensate field pressures to determine the phase split across a vertical impacting tee", Proc. Multiphase Technology 1998, Banff, pp 17-39.
165. Van Gorp, C. (1998), MSc Thesis, University of Manitoba.
166. Wallis, G.B. (1961), "Flooding velocities for air and water in vertical tubes", UKAEA Report AEEW-R123.
167. Walters, L.C., Soliman, H.M. and Sims, G.E. (1998), Two-phase pressure drop and phase distribution at reduced tee junctions", Int. J. Multiphase Flow, 24, pp 775-792.
168. Whalley, P.B., Azzopardi, B.J., Hewitt, G.F. and Owen, R.G. (1982), "A physical model for two-phase flows with thermodynamic and hydrodynamic non-equilibrium", 7th Int. Heat Transfer Conf, Munich. Paper CS29.
169. Williams, L.R., Dykhno, L.A. & Hanratty, T.J. (1996), "Droplet flux distributions and entrainment in horizontal gas-liquid flows", Int. J. Multiphase Flow, 22, pp 1-18.
170. nd Int. Symp. on Two-phase Flow Modelling and Experimentation, Pisa, 23-26 May.
171. Yonomoto, T. and Tasaka, K. (1988), "New theoretical model for two-phase flow discharged from stratified two-phase region through small break", J. Nucl. Sci. Tech., 25, pp 441-455.
172. Yonomoto, T. and Tasaka, K. (1991), "Liquid and gas entrainment to a small break hole from a stratified two-phase region", Int. J. Multiphase Flow, 17, pp 745-765.
173. Zetzmann, K. (1984), "Phase separation of air-water flow in a vertical T-junction", Ger. Chem. Eng., 7, pp 305-312.
174. Ashton, P.J.N. (1993), "Two-phase flow splitting at a tee junction with an inclined side arm", MSc Thesis, University of Tulsa.
175. Azzopardi, B.J. and Baker, S.R. (1981), "Two-phase flow in a T-junction: the effect of flow pattern in vertical upflow", UKAEA Report AERE R10174.
176. Azzopardi, B.J. and Freeman-Bell, G. (1982), "The effect of side arm diameter on the two-phase flow split at a "T" junction", UKAEA Report AERE M3290.
177. Azzopardi, B.J. and Purvis, A. (1987), "Measurements of the split of a two-phase flow at a vertical T-junction", UKAEA Report AERE R12441.
178. Azzopardi, B.J., Wagstaff, D., Patrick, L., Memory, S.B. and Dowling, J. (1988), "The split of two-phase flow at a horizontal T - annular and stratified flow", UKAEA Report AERE R13059.
179. Azzopardi, B.J., Patrick, L. and Memory, S.B. (1990), "The split of two-phase flow at a Horizontal T junction with a reduced diameter side arm", UKAEA Report AERE R13614.
180. Whalley, P.B. and Azzopardi, B.J. (1980), "Two-phase flow at a T junction", UKAEA Report AERE R9699.
181. Whalley, P.B. and Fells, N. (1981), "Two-phase flow in a T junction: further experimental results", UKAEA Report AERE M3149.