Design of novel plasma sprayed hydroxyapatite-bond coat bioceramic systems

Journal of Thermal Spray Technology

Volumn 8, Issue 4, 1999, Pages 597-604

  Heimann, R B ^a  

^a TU BERGAKADEMIE FREIBERG   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

BOND STRENGTH (MATERIALS); DENTAL PROSTHESES; HIP PROSTHESES; PLASMA SPRAYING; TITANIUM ALLOYS; TITANIUM OXIDES; ZIRCONIA;

BIOCERAMICS; HYDROXYAPATITE COATINGS;

SPRAYED COATINGS;

EID: 0033285412     PISSN: 10599630     EISSN: None     Source Type: Journal    
DOI: 10.1361/105996399770350304     Document Type: Article

References (39)

1. B. Barden, Failure Mechanisms in Total Hip and Knee Arthroplasty, Proc. Biomaterials: Fundamentals and Clinical Appl. (Essen, Germany), 8-9 Oct 1998, p 44
2. G. Willmann, Survival Rate and Reliability of Ceramic Femoral Heads for Total Hip Arthroplasty, Mater.wiss. Werkst.tech., Vol 29, 1998, p 595-604 (in German)
3. K. Soballe, H.B. Rasmussen, E.S. Hansen, and C. Buenger, Hydroxyapatite Coating Modifies Implant Membrane Formation. Controlled Micromotion Studies in Dogs, Acta Orthop. Scand., Vol 63 (No. 2), 1992, p 128-140
4. J. Beight, S.R. Radin, J. Cuckler, and P. Ducheyne, Effect of Solubility of Calcium Phosphate Coatings on Mechanical Fixation of Porous Ingrown Implants, Trans. 35th Annual Meeting Orthop. Res. Soc., Vol 14, 1989, p 334-342
5. R.T. Müller and T. Patsalis, Shear and Tensile Strength of Hydroxyapatite Coating under Loading Conditions. An Experimental Study in Dogs, Arch. Orthop. Trauma Surg., Vol 116, 1997, p 334-337
6. R.B. Heimann, Plasma Spray Coating. Principles and Applications, VCH Weinheim, 1996, 339 pages
7. R.B. Heimann, T.A. Vu, and M.L. Wayman, Biocerarnic Coatings: State-of-the-Art and Recent Development Trends, Eur. J. Mineral., Vol 9, 1997, p 597-615
8. J. Weng, X. Liu, X. Zhang, and X. Ji, Thermal Decomposition of Hydroxyapatite Structure Induced by Titanium and its Dioxide, J. Mater. Sci. Lett., Vol 13, 1994, p 159-161
9. H. Ji, C.B. Ponton, and P.M. Marquis, Microstructural Characterization of Hydroxyapatite Coatings on Titanium, J. Mater. Sci.: Mater. Med., Vol 3, 1992, p 283-287
10. M.L. Pereira, A.M. Abreu, J.P. Sousa, and G.S. Carvalho, Chromium Accumulation and Ultrastructural Changes in the Mouse Liver by Stainless Steel Corrosion Products, J. Mater. Sci.: Mater. Med., Vol 6, 1995, p 523-527
11. H. Tomas, G.S. Carvalho, M.H. Fernandes, A.P. Freire, and L.M. Abrantes, Effect of CoCr Corrosion Products and Corresponding Separate Metal Ions on Human Osteoblast-Like Cell Cultures, J. Mater. Sci.: Mater. Med., Vol 7, 1996, p 291-296
12. H.A. Schroeder, Trace Metals and Chronic Diseases, Adv. Int. Med., Vol 8, 1965, p 159-303
13. K. Soballe, Hydroxyapatite Ceramics for Bone Implant Fixation. Mechanical and Histological Studies in Dogs, Acta Orthop. Scand., Vol 64 (No. 255), 1993, 58 pages
14. P. Ducheyne and K.E. Healy, The Effect of Plasma-Sprayed Calcium Phosphate Ceramic Coatings on Metal Ion Release from Porous Titanium and Cobalt-Chromium Alloy, J. Biomed. Mater. Res., Vol 22, 1988, p 1137-1163
15. S.R. Sousa and M.A. Barbosa, The Effect of Hydroxyapatite Thickness on Metal Ions Release from Stainless Steel Substrates, J. Mater. Sci.: Mater. Med., Vol 6, 1995, p 818-823
16. C.C. Ribeiro, M.A. Barbosa, A.A.S.C. Machado, A. Tudor, and M.C. Davies, Modification in the Molecular Structure of Hydroxyapatite Induced by Titanium Ions, J. Mater. Sci: Mater. Med., Vol 6, 1995, p 829-834
17. C.Y. Yang, B.C. Wang, W.J. Chang, E. Chang, and J.D. Wu, The Influence of Plasma Spraying Parameters on the Characteristics of Hydroxyapatite Coatings: A Quantitative Study, J. Mater, Sci.: Mater. Med., Vol 7, 1996, p 167-174
18. J.C. Chae, J.P. Collier, M.B. Mayor, V.A. Surprenant, and L.A. Dauphinais, Enhanced Ingrowth of Porous-Coated CoCr Implants Plasma-Sprayed with Tricalcium Phosphate, J. Biomed. Mater. Res., Vol 26, 1992, p 93-102
19. K.A. Thomas, J.F. Kay, S.D. Cook, and M. Jarcho, The Effect of Surface Macrotexture and Hydroxyapatite Coating on the Mechanical Strength and Histological Profiles of Titanium Implant Materials, J. Biomed. Mater. Res., Vol 21, 1987, p 395-414
20. T. Smith, The Effect of Plasma-Sprayed Coatings on the Fatigue of Titanium Alloy Implants, J. Mater., Feb 1994, p 54-56
21. R.G.T. Geesink, K. de Groot, and C.P.A.T. Klein, Chemical Implant Fixation Using Hydroxyapatite Coatings, Clin. Orthop. Rel. Res., Vol 225, 1987, p 147-170
22. D. Lamy, A.C. Pierre, and R.B. Heimann, Hydroxyapatite Coatings with a Bond Coat on Biomedical Implants by Plasma Projection, J. Mater. Res., Vol 11 (No. 3), 1996, p 680-686
23. 2-Based Glasses: In Vitro Evaluation, J. Mater. Sci.: Mater. Med., Vol 1, 1990, p 239-244
24. E.M. Carlisle, Silicon: A Possible Factor in Bone Calcification, Science, Vol 167, 16 Jan 1970, p 279-280
25. K. Ogawa, N. Nagata, and T. Yogoro, Onoda Res. Rep., Vol 43, 2nd book (No. 125), 1991, p 46-54 (in Japanese)
26. S.R. Brown, I.G. Turner, and H. Reiter, Residual Stress Measurements in Thermal Sprayed Hydroxyapatite Coatings, J. Mater. Sci.: Mater. Med., Vol 5, 1994, p 756-759
27. H. Kurzweg, T. Troczynski, and R.B. Heimann, Adhesion of Thermally Sprayed Hydroxyapatite-Bond-Coat Systems Measured by a Novel Peel Test, J. Mater. Sci.: Mater. Med., Vol 9, 1998, p 9-16
28. H. Kurzweg, R.B. Heimann, T. Troczynski, and M.L. Wayman, Development of Plasma-Sprayed Bioceramic Coatings with Bond Coats Based on Titania and Zirconia, Biomaterials, Vol 19, 1998, p 1507-1511
29. R.B. Heimann, H. Kurzweg, and T.A. Vu, Hydroxyapatite-Bond Coat Systems for Improved Mechanical and Biological Performance of Hip Implants, Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, Ed., 25-29 May 1998, Nice, France, p 999-1005
30. O. Ohtsuka, M. Matsura, N. Chida, M. Yoshinori, T. Sumii, and T. Dérand, Formation of Hydroxyapatite on Pure Titanium Substrates by Ion Beam Dynamic Mixing, Surf. Coat. Technol., Vol 65, 1994, p 224-230
31. L.E. Samuels, Metallographic Polishing by Mechanical Methods, American Society for Metals, 1982, p 288
32. M. Sexsmith and T. Troczynski, Peel Adhesion Test for Thermal Sprayed Coatings, J.Therm. Spray Technol., Vol 3 (No. 4), 1994, p 404-409
33. A.D. Crocombe and R.D. Adams, Peel Analysis Using the Finite Element Method, J. Adhes., Vol 12, 1981, p 127-139
34. G. Willmann, Material Properties of Hydroxylapatite Ceramics, Interceram, Vol 42 (No. 4), 1993, p 206-208
35. T.W. Clyne and S.C. Gill, Residual Stresses in Thermal Spray Coatings and Their Effect on Interfacial Adhesion: A Review of Recent Work, J. Therm. Spray Technol., Vol 5 (No. 4), 1996, p 401-418
36. K. de Groot, R.T.G. Geesink, C.P.A.T. Klein, and P. Serekian, Plasma-Sprayed Coatings of Hydroxyl-Apatite, J. Biomed. Mater. Res., Vol 21, 1987, p 1375-1381
37. J. Weng, Q. Liu, J.G.C. Wolke, D. Zhang, and K. de Groot, J. Mater. Sci. Lett., Vol 16, 1997, p 335-337
38. R.Z. LeGeros, I. Orly, M. Gregoire, and G. Dalcusi, Substrate Surface Dissolution and Interfacial Biological Mineralization, The Bone-Biomaterial Interface, J.E. Davies, Ed., University of Toronto Press, 1991, p 76-88
39. R.Z. LeGeros, G. Dalcusi, I. Orly, T. Abergas, and W. Torres, Solution-Mediated Transformation of Octacalcium Phosphate (OCP) to Apatite, Scan. Microsc., Vol 3, 1989, p 129-138