Wear mechanisms at the metal evaporated magnetic tape-head interface

Journal of Tribology

Volumn 121, Issue 2, 1999, Pages 408-415

  Bera, Pascal ^a   Kato, Koji ^a   Osaki, Hiroyuki ^b   Terazono, Toshiyuki ^c   Kapsa, Philippe ^d  

^a TOHOKU UNIVERSITY   (Japan)

^b SONY CORPORATION   (Japan)

^c BRIDGESTONE CORPORATION   (Japan)

^d ECOLE CENTRALE DE LYON   (France)

Author keywords

[No Author keywords available]

Indexed keywords

DEBRIS; MAGNETIC TAPE; SPALLING; WEAR;

ATMOSPHERIC HUMIDITY; ATOMIC FORCE MICROSCOPY; INTERFACES (MATERIALS); MAGNETIC HEADS; MAGNETIC TAPE; SCANNING ELECTRON MICROSCOPY; SPALLING; STICTION;

CONTACT MECHANICS THEORY;

WEAR OF MATERIALS;

EID: 0033279631     PISSN: 07424787     EISSN: 15288897     Source Type: Journal    
DOI: 10.1115/1.2833954     Document Type: Article

References (34)

1. Archard, J. F., 1957, “Elastic Deformation and the Laws of Friction,” Proc. Roy. Soc. Lond., Series A, Vol. 243, pp. 190-205.
2. Berthier, Y., Godet, M., and Brendle, M., 1989, “Velocity Accommodation in Friction,”Tribology Transactions, Vol. 32(1), pp. 490-496.
3. Bertram, Neal H., 1986, “Fundamentals of the Magnetic Recording Process,”Proc. IEEE, Vol. 74(11), pp. 1494-1512.
4. Bhushan, B., 1984, “Analysis of the Real Area of Contact Between a Polymeric Magnetic Medium and a Rigid Surface,” ASME Journal of Tribology, Vol. 106, pp. 26-34.
5. Bhushan, B., 1990, Tribology and Mechanics of Magnetic Storage Devices, Springer-Verlag, New-York.
6. Bhushan, B., and Dugger, M. T., 1990, “Real Contact Area Measurements on Magnetic Rigid Disks,”Wear, Vol. 137, pp. 41-50.
7. Bull, S. J., 1991, “Failure Modes in Scratch Adhesion Testing,”Surface and Coatings Technology, Vol. 50, pp. 25-32.
8. Chang, W. R., Etsion, I., and Bogy, D. B., 1988“Adhesion Model for Metallic Rough Surfaces,” ASME Journal of Tribology, Vol. 110, pp. 50-56.
9. Chiba, K., Sato, K., Ebine, Y., and Sasaki, T., 1989, “Metal Evaporated Tape for High Band 8 mm Video System,”IEEE Trans. Cons. Elec., Vol. 35(3), pp. 421-428.
10. Cuddihy, E. F., 1980, “Aging of Magnetic Recording Tape,”IEEE Trans. Magn., Vol. 16(4), pp. 558-568.
11. Diao, F., Kato, K., and Hayashi, K., 1998, “The Calculation Method of Maximum Tensile Stress on Hard Coating under Sliding Friction,” submitted to Tribology International.
12. Feuerstein, A., and Mayr, M., 1984, “High Vacuum Evaporation of Ferromagnetic Materials—A New Production Technology for Magnetic Tapes,”IEEE Trans. Magn., Vol. 20(1), pp. 51-56.
13. Fuller, K. N. G., and Tabor, D., 1975, “The Effect of Surface Roughness on the Adhesion of Elastic Solids,”Proc. Roy. Soc. Lond., Series A, Vol. 345, pp. 327-342.
14. Greenwood, J. A., and Williamson, J. B. P., 1966, “Contact of Nominally Flat Surfaces,”Proc. Roy. Soc. Lond., Series A, Vol. 295, pp. 300-319.
15. Hedenqvist, P., Olsson, M., and Jacobson S., 1990, “Failure Mode Analysis of TiN-Coated High Speed Steel: In Situ Scratch Adhesion Testing in the Scanning Electron Microscope,”Surface and Coatings Technology, Vol. 41, pp. 31-49.
16. Israelachvili, J., Fisher, L. R., Horn R. G., and Christenson, H. K., 1982, “Measurement of Adhesion and Short-Range Forces between Molecularly Smooth Surfaces in Undersaturated Vapours and in Organic Liquids,” Microscopic Aspects Of Adhesion and Lubrication, J. M. George, ed., Elsevier, Amsterdam, pp. 55-69.
17. Kato, K., 1993, Materials Science and Technology, H. Mughrabi, ed., Vol. 6, Plastic Deformation and Fracture of Materials, New York, Ch. 13, pp. 635-680.
18. Koka, R., Pitchford, T., Jesh, M., and Egbert, D., 1993, “Studies on Head/Disc Contact Area Increase during Start/Stop and Continuous Drag Testing of Thin Film Disks,”Tribology Transactions, Vol. 36, pp. 1-10.
19. Kurokawa, H., Mitani, T., and Yonezawa, T., 1987, “Application of Diamond Like Carbon Films to Metallic Thin Film Magnetic Recording Media,”IEEE Trans. Magn., Vol. 23(5), pp. 2410-2412.
20. Lancaster, J. K., 1990, “A Review of the Influence of Environmental Humidity and Water on Friction, Lubrication and Wear,”Tribology International, Vol. 29(6), pp. 371-389.
21. Lauer, J. M., and Jones, W. R., 1986, “Friction Polymers,”Tribology and Mechanics of Magnetic Storage Systems, ASLE SP-21, pp. 14-23.
22. Li, Y., andTalke, F. E., 1990, “A Model for the Effect of Humidity on Stiction of the Head/Disk Interface,”Tribology and Mechanics of Magnetic Storage Systems, STLE SP-29, pp. 79-84.
23. Matthewson, M. J., and Mamin, H. J., 1988, “Liquid Mediated Adhesion of Ultra-Flat Solid Surfaces,”Proc. Materials Research Society, Vol. 119.
24. McFarlane, J. S., and Tabor, D., 1950, “Adhesion of Solids and the Effect of Surface Films,”Proc. Roy. Soc. Lond., Series A, Vol. 202, pp. 224-243.
25. Novotny, V. J., and Karis, T. E., 1991, “Sensitive Triboiogical Studies on Magnetic Recording Systems,” Advances in Information Storage Systems, B. Bhushan, ASME Press Series, Vol. 2, pp. 137-152.
26. Okuwaki, T., Kawakita, T., Akahane, N., and Kusumoto, K., 1993, “Investigation on Tape-Head Contact in VTR,”IEEE Trans. Magn., Vol. 29(6), pp, 3954-3956.
27. Osaki, H., 1993, “Role of Surface Asperities on Durability of Metal-Evaporated Magnetic Tapes,”IEEE Trans. Magn., Vol. 29(1), pp. 11-20.
28. Osaki, H., Fukushi, K., and Ozawa, K., 1990, “Wear Mechanisms of Metal-Evaporated Magnetic Tapes in Helical Scan Videotape Recorders,”IEEE Trans. Magn., Vol. 26(6), pp. 3180-3185.
29. Osaki, H., Uchiyama, H., and Honda, N., 1993, “Wear Mechanisms of Co-Cr Sputter Deposited Magnetic Tapes in Helical Scan Video Tape Recorders,”IEEE Trans. Magn., Vol. 29(1), pp. 41-58.
30. Rabinowicz, E., 1965, Friction and Wear of Materials, Wiley, New York, p. 194.
31. Smallen, M., Mee, P. B., Ahmad, A., Freitag, W., and Nanis, L., 1985, “Observations on Electrochemical and Environmental Corrosion Tests for Cobalt Alloy Disk Media”IEEE Trans. Magn., Vol. 21(5), pp. 1530-1532.
32. Stolarsky, T. A., 1994, “Analysis of the Resistance to Motion in a Sliding Contact,”Wear, Vol. 171, pp. 203-209.
33. Tomago, A., Suzuki, T., and Kunieda, T., 1985, “Effects of the Surface Configuration of Magnetic Layers on Durability against Mechanical Stress,”IEEE Trans. Magn., Vol. 21(5), pp. 1524-1526.
34. Vom Wedge F., and Hornbogen, H., 1988, “Wear Properties of Metal-Evaporated Video Tape,”Wear, Vol. 128, pp. 291-305.