Free jet impingement heat transfer of a high prandtl number fluid under conditions of highly varying properties

Journal of Heat Transfer

Volumn 121, Issue 3, 1999, Pages 592-597

  Leland, J E ^a   Pais, M R ^b  

^a AIR FORCE RESEARCH LABORATORY   (United States)

^b Cudo Technologies   (United States)

Author keywords

Cooling; Forced convection; Heat transfer; Jets

Indexed keywords

HEAT FLUX; HEAT LOSSES; HEAT TRANSFER COEFFICIENTS; JETS; LAMINAR FLOW; NOZZLES; NUSSELT NUMBER; PRANDTL NUMBER; REYNOLDS NUMBER; VISCOUS FLOW;

FREE JET IMPINGEMENT HEAT TRANSFER;

HEAT TRANSFER;

COOLING; HEAT TRANSFER; JET IMPINGEMENT; LUBRICANT; OIL;

EID: 0033238180     PISSN: 00221481     EISSN: 15288943     Source Type: Journal    
DOI: 10.1115/1.2826020     Document Type: Article

References (30)

1. Azuma, T., and Hoshino, T., 1984a, “The Radial Flow of a Thin Liquid Film. First Report, Laminar-Turbulent Transition,” Bulletin of the Japanese Society of Mechanical Engineers, Vol. 27, No. 234, pp. 2739-2746.
2. Azuma, T., and Hoshino, T., 1984b, “The Radial Flow of a Thin Liquid Film. Second Report, Liquid Film Thickness,” Bulletin of the Japanese Society of Mechanical Engineers, Vol. 27, No. 234, pp. 2747-2754.
3. Downs, S. J., and James, E. H., 1987, “Jet Impingement Heat Transfer—A Literature Survey,” ASME Paper No. 87-HT-35.
4. Ellison, B., and Webb, B. W., 1994, “Local Heat Transfer to Impinging Liquid Jets in the Initially Laminar, Transitional, and Turbulent Regimes,” International Journal of Heat and Mass Transfer, Vol. 37, No. 8, pp. 1207-1216.
5. Ferreira, C. A., and Richter, E., 1993, “A Detailed Design of a 250 kw Switched Reluctance Starter/generator for an Aircraft Engine,” SAE Journal of Aerospace, Vol. 102, pp. 289-300.
6. Gardon, R., and Cobonpue, J., 1961, “Heat Transfer Between a Flat Plate and Jets of Air Impinging on it,” Proceedings of the Second International Heat Transfer Conference, Boulder CO, ASME, New York, pp. 454-460.
7. Goldstein, R. J., Behbahani, A. I., and Kieger Heppelmann, K., 1986, “Streamwise Distribution of the Recovery Factor and the Local Heat Transfer Coefficient to an Impinging Circular Air Jet,” International Journal of Heat and Mass Transfer, Vol. 29, No. 8, pp. 1227-1235.
8. Gu, C. B., Su, G. S., Chow, L. C., and Pais, M. R., 1993, “Comparison of Spray and Jet Impingement Cooling,” ASME Paper No. 93-HT-20.
9. Jiji, L. M., and Dagan, Z., 1987, “Experimental Investigation of Single Phase Multi-Jet Impingement Cooling of an Array of Microelectronic Heat Sources.” Proceedings of the International Symposium on Cooling Technology, Pacific Institute for Thermal Engineering, pp. 265-283.
10. Kays, W. M., and Crawford, M. E., 1980, Convective Heat and Mass Transfer, McGraw-Hill, New York, pp. 296-297.
11. Kline, S. J., and McClintock, F. A., 1953, “Describing Uncertainties in SingleSample Experiments,” Mechanical Engineering, Vol. 75, Jan., pp. 3-8.
12. Lee, X. C., Ma, C. F., Zheng, Q., Zhuang, Y., and Tian, Y. Q., 1997, “Numerical Study of Recovery Effect and Impingement Heat Transfer with Submerged Circular Jets of Large Prandtl Number Liquid,” International Journal of Heat and Mass Transfer, Vol. 40, No. 11, pp. 2647-2653.
13. Leland, J. E., 1994, “The Effects of Channel Curvature and Protrusion Height on Nucleate Boiling and the Critical Heat Flux of a Simulated Electronic Chip,” Ph.D. dissertation, University of Kentucky, Lexington, KY.
14. Liu, X., Lienhard, V. J. H., and Lombara, J. S., 1991, “Convective Heat Transfer by Impingement of Circular Liquid Jets,” ASME Journal of Heat Transfer, Vol. 113, pp. 571-582.
15. Livingood, J. N. B., and Hrycak, P., 1973, “Impingement Heat Transfer from Turbulent Air Jets to Flat Plates—A Literature Survey,” NASA TM X-2778.
16. Ma, C.-F., Sun, H., Auracher, H., and Gomi, T., 1990, “Local Convective Heat Transfer From Vertical Heated Surfaces to Impinging Circular Jets of Large Prandtl Number Liquids,” Proceedings of the 9th International Heat Transfer Conference, Vol. 2, Jerusalem, Hemisphere, Washington, DC, pp. 441-446.
17. Ma, C. F., Zheng, Q., Sun, H., and Wu, K., 1997a, "Local Characteristics for Impingement Heat Transfer with Oblique Round Free-Surface Jets of Large Prandtl Number Liquid,” International Journal of Heat and Mass Transfer, Vol. 40, No. 10, pp. 2249-2259.
18. Ma, C. F., Zheng, Q., Lee, S. C., and Gomi, T., 1997b, “Impingement Heat Transfer and Recovery Effect with Submerged Jets of Large Prandtl Number Liquid—L Unconfined Circular Jets,” International Journal of Heat and Mass Transfer, Vol. 40, No. 6, pp. 1481-1490.
19. Ma, C. F., Zhuang, Y., Lee, S. C., and Gomi, T., 1997c, “Impingement Heat Transfer and Recovery Effect with Submerged Jets of Large Prandtl Number Liquid-—II. Initially Laminar Confined Slot Jets,” International Journal of Heat and Mass Transfer, Vol. 40, No. 6, pp. 1491-1500.
20. Martin, H., 1977, “Heat and Mass Transfer Between Impinging Gas Jets and Solid Surfaces,” Advances in Heat Transfer, Vol. 13, Academic Press, New York, pp. 1-60.
21. Metzger, D. E., Cummings, K. N., and Ruby, W. A., 1974, “Effects of Prandtl Number on Heat Transfer Characteristics of Impinging Liquid Jets,” Proceedings of the 5th International Heat Transfer Conference, Vol. 2, Tokyo, Hemisphere, Washington, DC, pp. 20-24.
22. Pais, M. R., Leland, J. E., Chang, W. S., and Chow, L. C., 1993, “Jet Impingement Cooling Using a Jet Fuel,” ASME Paper No. 93-HT-22.
23. Pais, M. R., Chow, L. C., Knee, J., Bonneau, V., Leland, J. E., and Beam, J. E., 1995, “Jet Impingement Cooling in VSCF Generators,” SAE Paper No. SAE 951451, SAE Aerospace Atlantic Conference, Dayton, OH.
24. Pan, Y., Stevens, J., and Webb, B. W., 1992, “Effect of Nozzle Configuration of Transport in the Stagnation Zone of Axisymmetric, Impinging Free-Surface Liquid Jets: Part 2—Local Heat Transfer,” ASME Journal of Heat Transfer, Vol. 114, pp. 880-886.
25. Polat, S., Huang, B., Mujumdar, A. S., and Douglas, W. J. M., 1989, “Numerical Flow and Heat Transfer Under Impinging Jets: A Review,” Annual Review of Numerical Fluid Mechanics and Heat Transfer, Vol. 2, Hemisphere, New York, pp. 157-197.
26. Rahman, M. M., Bula, A. J., and Leland, J. E., 1998, “Numerical Modeling of Conjugate Heat Transfer During Free Liquid Jet Impingement,” Proceedings of the ASME Advanced Energy Systems Division, AES-Vol. 38, ASME, New York, pp. 475-486.
27. Rahman, M. M., Bula, A. J., and Leland, J. E., 1998, “Conjugate Heat Transfer During Free Jet Impingement of a High Prandtl Number Fluid,” Numerical Heat Transfer, Part A: Applications, submitted for publication.
28. Wang, X. S., Dagan, Z., and Jiji, L. M., 1989, “Conjugate Heat Transfer Between a Laminar Impinging Liquid Jet and a Solid Disk,” International Journal of Heat and Mass Transfer, Vol. 32, No. 11, pp. 2189-2197.
29. Webb, B. W., and Ma, C.-F., 1995, “Single-Phase Liquid Jet Impingement Heat Transfer,” Advances in Heat Transfer, Vol. 26, Academic Press, New York, pp. 105-217.
30. Wolf, D. H., Incropera, F. P., and Viskanta, R., 1993, “Jet Impingement Boiling,” Advances in Heat Transfer, Vol. 23, Academic Press, New York, pp. 1-132.