An induction heating process with coil design and solutions avoiding coarsening phenomena of Al-6 Pet Si-3 Pct Cu-0.3 Pct Mg alloy for thixoforming

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 30, Issue 11, 1999, Pages 2967-2977

  Jung, H K ^a   Kang, C G ^a  

^a Pusan National University   (South Korea)

Author keywords

[No Author keywords available]

Indexed keywords

BILLETS (METAL BARS); DIE CASTING; FORGING; INDUCTION HEATING; METALLOGRAPHIC MICROSTRUCTURE; THERMAL EFFECTS;

THIXOFORMING;

ALUMINUM ALLOYS;

EID: 0033225351     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-999-0134-5     Document Type: Article

References (28)

1. R. Sebus and G. Henneberger: Proc. 5th Int. Conf. on Semi-Solid Processing of Alloys and Composites, Golden, CO, June 1998, A.K. Bhasin, J.J. Moore, K.P. Young, and S. Midson, eds., Colorado School of Mines, Golden, CO, 1998, pp. 481-87.
2. F. Matsuura and S. Kitamura: Proc. 5th Int. Conf. on Semi-Solid Processing of Alloys and Composites, Golden, CO, June 1998, A.K. Bhasin, J.J. Moore, K.P. Young, and S. Midson, eds. Colorado School of Mines, Golden, CO, 1998, pp. 489-96.
3. S. Midson, V. Rudnev, and R. Gallik: Proc. 5th Int. Conf. on Semi-Solid Processing of Alloys and Composites, Golden, CO, June 1998, A.K. Bhasin, J.J. Moore, K.P. Young, and S. Midson, eds., Colorado School of Mines, Golden, CO, 1998, pp. 497-504.
4. V.I. Rudnev, R.L. Cook, D.L. Loveless, and M.R. Black: Steel Heat Treatment Handbook, Marcel Dekker Inc., New York, NY, 1997, pp. 794-857.
5. V.I. Rudnev and R. L. Cook: Forging Mag., 1995, Winter, pp. 27-30.
6. V.S. Nemkov, V.B. Demidovich, V.I. Rudnev, and O. Fishman: Proc. XIIth Electroheat Congress ELECTROTECH 92, Montreal, 1992, IEEE and EMC Society, Montreal, 1992, pp. 180-88.
7. V.I. Rudnev and D.L. Loveless: Industrial Heating, 1995, Jan., part 1, pp. 29-34.
8. G. Wan, T. Witulski, and G. Hirt: Int. Conf. on Aluminium Alloys: New Process Technologies, Marina di Ravenna, June 1993.
9. T. Witulski, U. Morjan, I. Niedick, and G. Hirt: Proc. 5th Int. Conf. on Semi-Solid Processing of Alloys and Composites, Golden, CO, June 1998, A.K. Bhasin, J.J. Moore, K.P. Young, and S. Midson, eds., Colorado School of Mines, Golden, CO, 1998, pp. 353-60.
10. M. Garat, S. Blais, C. Pluchon, and W.R. Loue': Proc. 5th Int. Conf. on Semi-Solid Processing of Alloys and Composites, Golden, CO, June 1998, A.K. Bhasin, J.J. Moore, K.P. Young, and S. Midson, eds., Colorado School of Mines, Golden, CO, 1998, pp. xvii-xxxi.
11. C. Pluchon, W. Loue' and M. Garat: Proc. Symp. on Forming Technology of Semi-Solid Metals, Pusan, Nov. 1997, C.G. Kang, ed., KSTP and KIMM, Pusan National University, Pusan, 1997, pp. 80-95.
12. W. Loue and M. Garat: Proc. Symp. on Forming Technology of Semi-Solid Metals, Pusan, Nov. 1997, C.G. Kang, ed., KSTP and KIMM, Pusan National University, Pusan, 1997, pp. 96-104.
13. M. Garat: Proc. Symp. on Fanning Technology of Semi-Solid Metals, Pusan, Nov. 1997, C.G. Kang, ed., KSTP and KIMM, Pusan National University, Pusan, 1997, pp. 105-13.
14. C.G. Kang, Y.J. Do, and S.S. Kang: J. Kor. Soc. Technol. Plasticity, 1998, vol. 7 (3), pp. 215-24.
15. H.K. Jung and C.G. Kang: J. Kor. Foundry-men's Soc., 1998, vol. 18 (5), pp. 450-61.
16. E.J. Davies: Conduction and Induction Heating, Peter Peregrinus Ltd., London, 1990, pp. 100, 164-79, and 202-22.
17. N.R. Stansel: Induction Heating, McGraw-Hill, New York, NY, 1949, p. 178.
18. V.I. Rudnev, L.C. Raymond, D.L. Loveless, and M.R. Black: Induction Heat Treatment, Marcel Dekker Inc., New York, NY, 1997, pp. 775-911.
19. Metals Handbook: Properties and Selection: Nonferrous Alloys and Special Purpose Materials, 10th ed., ASM INTERNATIONAL, Materials Park, OH, 1990, vol. 2, pp. 164-66.
20. C.G. Kang, H.K. Jung, and Y.J. Jung: Proc. 6th Int. Conf. on Technology of Plasticity (ICTP), Nuremberg, Sept. 1999, M. Geiger, ed., VDI and WGP, Friedrich-Alexander-University, Nuremberg, Germany, 1999, in press.
21. C.G. Kang, Y.H. Kim, and H.K. Jung: "Thixoforming Process Development of Aluminum Materials," Technical Report No. NSDM 98K3-0908-01-01-3, Engineering Research Center for Net Shape and Die Manufacturing, Pusan National University, Pusan, 1999.
22. C.G. Kang, H.K. Jung, and N.S. Kim: Int. J. Mech. Sci., 1999, vol. 41(12), pp. 1423-45.
23. I.J. Kim and D.H. Kim: J. Kor. Foundrymen's Soc., 1997, vol. 17(4), pp. 311-18.
24. C.G. Kang and J. Y. Kang: "The Process Development on Thixoforming of Aluminium Materials," Technical Report, No. NSDM 97K3-0908-01-01-3, Engineering Research Center for Net Shape and Die Manufacturing, Pusan National University, Pusan, Feb. 1998.
25. W. Kurz and D.J. Fisher: Fundamentals of Solidification, Trans Tech Publications, Aedermannsdorf Switzerland, 1984, pp. 34-43.
26. G. Hirt, R. Cremer, A. Winkelmann, T. Witulski, and M. Zillgen: J. Mater. Processing Technol., 1994, vol. 45, pp. 359-64.
27. C.G. Kang, K.D. Jung, and H.K. Jung: Proc. 2nd Int. Conf. on Intelligent Processing and Manufacturing of Materials (IPMM), Honolulu, Hawaii, July 1999, J.A. Meech, M.M. Veiga, M.H. Smith, and S.R. LeClair, eds., West Coast Reproduction Centers, Vancouver, B.C., 1999, pp. 593-99.
28. S. Kouji: Proc. 175th JSTP Symp. for Semi-Solid Metals Forming, Tokyo, May 1997, M. Kiuchi, ed., JSTP and JSME, Tokyo University of Technology, Tokyo, 1997, pp. 25-33.