Creep-rupture behavior of forged, thick section 9Cr-1Mo ferritic steel

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 30, Issue 11, 1999, Pages 2825-2834

  Choudhary, B K ^a   Saroja, S ^a   Bhanu Sankara Rao, K ^a   Mannan, S L ^a  

^a INDIRA GANDHI CENTRE FOR ATOMIC RESEARCH   (India)

Author keywords

[No Author keywords available]

Indexed keywords

CREEP; DISLOCATIONS (CRYSTALS); DUCTILITY; FAILURE ANALYSIS; FORGING; QUENCHING; STEEL HEAT TREATMENT; TEMPERING;

FERRITIC STEEL; MONKMAN-GRANT RELATIONSHIP (MGR); SIMULATED POSTWELD HEAT TREATMENT (SPWHT);

STEEL TESTING;

EID: 0033225097     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-999-0120-y     Document Type: Article

References (43)

1. R.S. Fidler: "The Creep of Normalised and Tempered 9Cr-1Mo: Effects of Stress, Temperature and Grain Size on Creep and Rupture Properties," CEGB Report No. RD/L/R 1949, Central Electricity Generating Board, United Kingdom, 1976.
2. B.J. Cane and R.S. Fidler: Proc. Int. Conf. on Ferritic Steels for Fast Reactor Steam Generators, S.F. Pugh and E.A. Little, eds., British Nuclear Energy Society, London, 1977, pp. 193-99.
3. D.S. Wood, A.B. Baldwin, F.W. Grounds, J. Wynn, E.G. Wilson, and J. Waring: Proc. Int. Conf. on Ferritic Steels for Fast Reactor Steam Generators, S.F. Pugh and E.A. Little, eds., British Nuclear Energy Society, London, 1977, pp. 189-92.
4. D.S. Wood, A.B. Baldwin, and K. Williamson: Proc. IAEA Meeting Time and Load Dependent Degradation of Pressure Boundary Materials, Innsbruck, Austria, 1978, Report IWG-RRPC-79/2, 1979, pp. 88-105.
5. D.S. Wood: Proc. Conf. Experience of Structural Validation in the Nuclear Energy Industry with Emphasis on High Temperature Design, I. Mech. E., London, 1979, p. 23.
6. S.J. Sanderson: Ferritic Steels for High Temperature Applications, Ashok K. Khare, ed., ASM, Metals Park, OH, 1981, pp. 85-99.
7. E. Barker, G.J. Lloyd, and R. Pilkington: Mater. Sci. Eng., 1986, vol. 84, pp. 49-64.
8. J. Orr and S.J. Sanderson: Proc. Topical Conf. Ferritic Alloys for Use in Nuclear Energy Technologies, J.W. Davies and D.J. Michel, eds., TMS-AIME, Warrendale, PA, 1984, pp. 261-67.
9. S.J. Sanderson and S. Jacques: Proc. IAEA Specialist Meeting Mechanical Properties of Structural Materials Including Environmental Effects, Chester, England, 1983, Report IWGFR-49, 1984, vol. 2, pp. 601-11.
10. B.K. Choudhary: Ph.D. Thesis, Indian Institute of Technology, Bombay, 1997.
11. B.K. Choudhary, K. Bhanu Sankara Rao, and S.L. Mannan: Mater. Sci. Eng. A, 1991, vol. 148, pp. 267-78.
12. B.K. Choudhary, K. Bhanu Sankara Rao, and S.L. Mannan: Int. J. Pressure Vessel Piping, 1994, vol. 58, pp. 151-60.
13. B.K. Choudhary, K. Bhanu Sankara Rao, and S.L. Mannan: Trans. Indian Institute of Metals, Calcutta, India, 1999, in press.
14. G. Eggeler, N. Nilsvang, and B. Ilschner: Steel Res., 1987, vol. 58, pp. 97-103.
15. J.C. Earthman, G. Eggeler, and B. Ilschner: Mater. Sci. Eng., 1989, vol. A110, pp. 103-14.
16. G. Eggeler, J.C. Earthman, N. Nilsvang, and B. Ilschner: Acta Metall., 1989, vol. 37, pp. 49-60.
17. S.J. Sanderson: Met. Sci. J., 1977, vol. 11, pp. 490-92.
18. M. Wall, B.C. Edwards, and J.A. Hudson: Proc. Specialist Meeting Mechanical Properties of Structural Materials Including Environmental Effects, Chester, England, 1983, Report IWGFR-49, 1984, vol. 2, pp. 545-77.
19. C.A. Hippsley and N.P. Haworth: Mater. Sci. Technol., 1988, vol. 4, pp. 791-802.
20. B.A. Senior, F.W. Noble, and B.L. Eyre: Acta Metall., 1986, vol. 34, pp. 1321-27.
21. B.A. Senior, F.W. Noble, and B.L. Eyre: Acta Metall., 1988, vol. 36, pp. 1855-62.
22. S. Saroja, P. Parmeswaran, M Vijaylakshmi, and V.S. Raghunathan: Acta Metall. Mater., 1995, vol. 43, pp. 2985-3000.
23. V.K. Sikka, C.T. Ward, and K.C. Thomas: in Ferritic Steels for High Temperature Applications, Ashok K. Khare, ed., ASM, Metals Park, OH, 1981, pp. 66-84.
24. V.K. Sikka, M.G. Cowgil, and B.W. Roberts: Proc. Topical Conf. Ferritic Alloys for Use in Nuclear Energy Technologies, J.W. Davis and D.J. Michel, eds., TMS-AIME, Warrendale, PA, 1984, pp. 417-23.
25. F.C. Monkman and N.J. Grant: Proc. Am. Soc. Test. Mater, 1956, vol. 56, pp. 593-620.
26. F. Dobes and K. Milicka: Met. Sci. J., 1976, vol. 10, pp. 382-84.
27. F.A. Leckie and D.R. Hayhurst: Acta Metall., 1977, vol 25, pp. 1059-70.
28. M.F. Ashby and B.F. Dyson: in Advances in Fracture Research, S.R. Valluri, D.M.R. Taplin, P. Rama Rao, J.F. Knott, and R. Dubcy, eds., Pergamon Press, Oxford, United Kingdom, 1984, vol. 1, pp. 3-30.
29. R.C. Boettner and W.D. Robertson: Trans. TMS-AIME, 1968, vol. 221, pp. 613-22.
30. B.F. Dyson and T.B. Gibbons: Acta Metall., 1987, vol. 35, pp. 2355-69.
31. C.M. Sellars: Creep Strength in Steel and High Temperature Alloy, The Metals Society, London, 1972, pp. 20-30.
32. K.R. Williams and B. Wilshire: Mater. Sci. Eng., 1977, vol. 28, pp. 189-96.
33. B.F. Dyson and M. McLean: Acta Metall, 1983, vol. 31, pp. 17-27.
34. F. Arav, H.J.M. Lentferink, C.F. Etienne, and J.C. van Wortel: Proc. 5th Int. Conf. Creep of Materials, Creep: Characterization, Damage and Life Assessment, Lake Buena Vista, FL 1992, D.A. Woodford, C.H.A. Townley, and M. Ohnami, eds., ASM International, Materials Park, Ohio, 1992, pp. 117-25.
35. V. Sklenicka, K. Kucharova, A. Dlouhy, and J. Krejci: Proc. Conf. Materials for Advanced Power Engineering 1994, D. Coutsoradis, J.H. Davidson, J. Ewald, P. Greenfield, T. Khan, M. Malik, D.B. Meadowcroft, V. Regis, R.B. Scarlin, F. Schubert, and D.V. Thornton, eds., Leige, Belgium, 1994, pp. 435-44.
36. F. Abe and S. Nakazawa: Metall Trans. A, 1992, vol. 23A, pp. 3025-34.
37. P.J. Ennis, A. Zielinska-Lipiec, O. Wachter, and A. Czyrska-Filemonowicz: Acta Mater., 1997, vol. 45, pp. 4901-07.
38. G. Eggeler: Acta Mater., 1989, vol. 37, pp. 3225-34.
39. D. Burton, J. Orr, and J.B. Marriot: Proc. Int. Conf. on Ferritic Steels for Fast Reactor Steam Generators, S.F. Pugh and E.A. Little, eds., British Nuclear Energy Society, London, 1977, pp. 205-11.
40. A. Mendelson, E. Roberts, and S.S. Manson: "Report NASA-TN-D-2975," NASA, Washington, DC, 1965.
41. M. Aubert, M.F. Felsen, D. Guttman, and M. Van Duysen: CEAENEA-DEBENE/PNC Exchange Meeting with UKAEA on in Air and in Sodium Tests on Structural Materials Including Irradiation Effects, CEA-SACLAY, Saclay, France, 1990, pp. 265-74.
42. D.J. Barlow, C.J. Middleton, and E. Metcalfe: Proc. Int. Conf. Steam Plants of the 1990's, I. Mech. E., London, 1990, pp. 265-74.
43. F. Abe, T. Noda, H. Araki, and S. Nakazawa: J. Nucl. Mater., 1991, vols. 179-181, pp. 663-66.