Computational structures technology: leap frogging into the twenty-first century

Computers and Structures

Volumn 73, Issue 1-5, 1999, Pages 1-31

  Noor, Ahmed K ^a  

^a UNIVERSITY OF VIRGINIA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ALGORITHMS; COMPOSITE STRUCTURES; COMPUTER SIMULATION; COMPUTER SOFTWARE; INTELLIGENT STRUCTURES; PROBLEM SOLVING; SANDWICH STRUCTURES; SENSITIVITY ANALYSIS;

COMPUTATIONAL STRUCTURES TECHNOLOGY; LEAP FROGGING;

COMPUTATIONAL METHODS;

EID: 0033207407     PISSN: 00457949     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0045-7949(99)00075-9     Document Type: Article

References (210)

1. Clough R.W. Original formulation of the finite element method. Finite Elements in Analysis and Design. 7:1991;89-101.
2. Wilson E.L. Automation of the finite element method: a personal historical review. Finite Elements in Analysis and Design. 13:(2):1993;91-104.
3. Focus '93: Computational Structures Technology, Aerospace America, February 1993.
4. Noor AK, et al. (compilers). Computational structures technology for airframes and propulsion systems, NASA CP-3142, 1992.
5. Goudreau G.L. Computational structural mechanics: from national defense to national resource. IEEE Computational Science and Engineering. 1:(1):1994;33-42.
6. Argyris J., Doltsinis I.St, Frik G, Tenek L. Computational structures technology in Europe: past, present and future. IEEE Computational Science and Engineering. 1:(1):1994;43-54.
7. Noor A.K., Atluri S.N. Advances and trends in computational structural mechanics. AIAA Journal. 25:(7):1987;977-995.
8. Noor A.K., Venneri S.L. A perspective on computational structures technology. IEEE Computer Journal. 26:(10):1993;38-46.
9. Noor A.K., Venneri S.L. Computational structures technology. Flight vehicle materials, structures and dynamics. vol. 6:1995;American Society of Mechanical Engineers, New York.
10. Ju J.W. Numerical methods in structural mechanics. 1995;ASME Press, New York.
11. Noor AK, Housner JM, Starnes Jr, JH, Hopkins DA, Chamis CC (compilers). Computational structures technology for airframes and propulsion systems, NASA CP-3142, 1992.
12. Ladeveze P., Zienkiewicz O.C. New advances in computational structural mechanics, Proc. European Conf. on New Advances in Computational Structural Mechanics, Giens, France. 1992;Elsevier, Amsterdam.
13. Stein E. Progress in computational analysis in inelastic structures. 1993;Springer-Verlag, Vienna.
14. Storaasli OO, editor. Large scale analysis and design on high performance computers and workstations, Advances in Engineering Software 1998;29(3-6).
15. Topping B.H.V. Advances in computational structural mechanics. Civil-Comp Press. 1998;Edinburgh, UK.
16. Mackerle J., Fredriksson B. A handbook of finite element software: supercomputers, main-frames, minicomputers and microcomputers. 1988;Studentlitteratur, Lund, Sweden.
17. Mackerle J. Finite element methods: a guide to information sources. 1991;Elsevier, Amsterdam.
18. Proc. of the Seventh AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, September 2-4, 1998, St. Louis, MO, A Collection of Technical Papers, 3 volumes, Washington, DC:AIAA, 1998.
19. Petit J., de Fouquet J., Henaff G., Villechaise P., Dragon A. ECF 11: mechanisms and mechanics of damage and failure, vol. 1, Proc. 11th Biennial European Conference on Fracture, Poitiers-Futuroscope, France. 1996;Engineering Materials Advisory Services, West Midlands, UK.
20. Nishioka T. Computational dynamic fracture mechanics. International Journal of Fracture. 86:(1/2):1997;127-159.
21. Aliabadi M.H. Nonlinear fracture and damage mechanics. Advances in fracture mechanics. vol. 4:1999;WIT Press, Southampton, UK.
22. Trujillo D.M., Busby H.R. Practical inverse analysis in engineering. 1997;CRC Press, Boca Raton, FL.
23. Tanaka M., Dulikravich G.S. Inverse problems in engineering mechanics. 1998;Elsevier Science, New York.
24. Tanaka M., Sladek V., Sladek J. Regularization techniques applied to boundary element methods. Applied Mechanics Reviews. 47:(10):1994;457-499.
25. Beskos D.E. Boundary element methods in dynamic analysis: part II (1986-1996). Applied Mechanics Reviews, ASME. 50:1997;149-197.
26. Aliabadi M.H. Boundary element formulations in fracture mechanics. Applied Mechanics Reviews. 50:(2):1997;83-96.
27. Banerjee P.K. Boundary element methods in engineering. 1994;McGraw-Hill, New York.
28. Rong T-Y. Generalized mixed variational principles and new FEM models in solid mechanics. International Journal of Solids and Structures. 24:(11):1988;1131-1140.
29. Rong T-Y., Lu A.-Q. Parametrized Lagrange multiplier method and construction of generalized mixed variational principles for computational mechanics. Computer Methods in Applied Mechanics and Engineering. 164:(3/4):1998;287-296.
30. Felippa C.A. A survey of parametrized variational principles and applications to computational mechanics. Computer Methods in Applied Mechanics and Engineering. 113:1994;109-139.
31. Felippa C.A., Haugen B., Militello C. From the individual element test to finite element templates: evolution of the patch test. International Journal for Numerical Methods in Engineering. 38:1995;199-239.
32. Selected Papers From the Second International Conference on Spectral and High-Order Methods; special issue of Computer Methods in Applied Mechanics and Engineering 1994;116(1-4).
33. Sherwin S.J., Karniadakis G.E. A triangular spectral element method: applications to the incompressible Navier-Stokes equations. Computer Methods in Applied Mechanics and Engineering. 123:1995;189-229.
34. Sherwin S.J., Karniadakis G.E. Tetrahedral hp finite elements: algorithms and flow simulations. Journal of Computational Physics. 124:1996;14-45.
35. Strang G. Wavelets and dilation equations: a brief introduction. SIAM Review. 31:(4):1989;614-627.
36. Williams J.R., Amaratunga K. Introduction to wavelets in engineering. International Journal for Numerical Methods in Engineering. 37:(14):1994;2365-2388.
37. Ko J., Kurdila A.J., Pilant M.S. A class of wavelet-based finite element methods for computational mechanics. Proc. of the 35th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Hilton Head, SC, April 18-20, 1994, Part 2, AIAA Paper 94-1388-CP. 1994.
38. Kurdila A.J. Wavelet and multiscale methods for partial differential equations. 1997;Academic Press, San Diego, CA.
39. Ko J., Kurdila A.J., Pilant M.S. Triangular wavelet based finite elements via multivalued scaling equations. Computer Methods in Applied Mechanics and Engineering. 146:(1-2):1997;1-17.
40. Vasilyev O.V., Paolucci S. A dynamically adaptive multilevel wavelet collocation method for solving partial differential equations in a finite domain. Journal of Computational Physics. 125:1996;498-512.
41. Teixeira de Freitas J.A., Moitinho de Almeida J.P., Ribeiro Pereira E.M.B. Non-conventional formulations for the finite element method. Structural Engineering and Mechanics. 4:(6):1996;655-678.
42. Belytschko T., Krongauz Y., Organ D., Fleming M. Meshless methods: an overview and recent developments. Computer Methods in Applied Mechanics and Engineering. 139:1996;3-47.
43. Liu W-K, Jun S, Adee J, Belytschko T. Reproducing kernel particle methods for structural dynamics. International Journal for Numerical Methods in Engineering 1994;38(8):1655-79.
44. Gingold R.A., Monaghan J.J. Smoothed particle hydrodynamics: theory and application to non-spherical stars. Mon. Nat. Roy. Astron. Soc. 181:1977;375-389.
45. Atluri S.N., Zhu T. A new meshless local Petrov-Galerkin (MLPG) approach in computational mechanics. Computational Mechanics. 22:(2):1998;117-127.
46. Zienkiewicz O.C., Onate E. Finite volumes vs finite elements. Is there really a choice? Wriggers P., Wagner W. Nonlinear computational mechanics, state-of-the-art. 1991;240-254 Springer-Verlag, Berlin.
47. Onate E., Cervera M., Zienkiewicz O.C. A finite volume format for structural mechanics. International Journal for Numerical Methods in Engineering. 37:(2):1994;181-201.
48. Bailey C., Cross M. A finite volume procedure to solve elastic solid mechanics problems in three dimensions on an unstructured mesh. International Journal for Numerical Methods in Engineering. 38:1995;1757-1776.
49. Demirdzic I., Muzaferija S. Numerical method for coupled fluid flow, heat transfer and stress analysis using unstructured moving meshes with cells of arbitrary topology. Computer Methods in Applied Mechanics and Engineering. 125:1995;235-255.
50. Song Ch., Wolf J.P. The scaled boundary finite-element method - alias consistent infinitesimal finite element cell method-for elastodynamics. Computer Methods in Applied Mechanics and Engineering. 147:1997;329-355.
51. Demirdzic I., Muzaferija S., Peric M. Benchmark solutions of some structural analysis problems using finite volume method and multigrid acceleration. International Journal for Numerical Methods in Engineering. 40:1997;1893-1908.
52. Duarte C.A.M., Oden J.T. Hp clouds: an hp meshless method. Numerical Methods for Partial Differential Equations. 12:1996;673-705.
53. Babuska I., Melenk J.M. The partition of unity finite element method. International Journal for Numerical Methods in Engineering. 40:1997;727-758.
54. Chapelle D., Bathe K.J. Fundamental considerations for the finite element analysis of shell structures. Computers and Structures. 66:(1):1998;19-36.
55. MacNeal R.H. Perspective on finite elements for shell analysis. Finite Elements in Analysis and Design. 30:1998;175-186.
56. Noor A.K., Belytschko T., Simo J.C. Analytical and computational models for shells, Proc. of the symposium, ASME Winter Annual Meeting, December 10-15, 1989, San Francisco, CA, CED vol. 3, ASME, New York. 1989.
57. Bathe K.J. Finite element procedures. 1996;Prentice-Hall, Englewood Cliffs, NJ.
58. Bathe KJ, Iosilevich A, Chapelle D. An evaluation of the MITC shell elements. Computers and Structures, in press.
59. Bathe KJ, Iosilevich A, Chapelle D. An inf-sup test for shell finite elements, Computers and Structures, in press.
60. Tvergaard V., Needleman A. Effects of non-local damage in porous plastic solids. International Journal of Solids and Structures. 32:1995;1063-1077.
61. Owen D.R.J., et al. Computational plasticity: fundamentals and applications. 1997;CIMNE, Barcelona.
62. Simo J.C., Hughes T.J.R. Computational inelasticity. 1998;Springer-Verlag, New York.
63. Ramaswamy S., Aravas N. Finite element implementation of gradient plasticity models. Part I: gradient-dependent yield functions. Computer Methods in Applied Mechanics and Engineering. 163:(1-4):1998;11-32.
64. Eberhardt J.J., Hay P.J., Carpenter J.A. Materials by design: a hierarchical approach to the design of new materials. Materials Research Society Symposium Proc. 63:1985;191-206.
65. U.S. Congressional Board, Advanced materials by design, Office of Technology Assessment, Washington, DC, 1988.
66. Noor A.K., Burton W.S. Computational models for high-temperature multilayered composite plates and shells. Applied Mechanics Reviews. 45:(10):1992;419-446.
67. Noor A.K., Burton W.S., Bert C.W. Computational models for sandwich panels and shells. Applied Mechanics Reviews. 49:(3):1996;155-199.
68. Rolfes R., Noor A.K., Sparr H. Evaluation of transverse thermal stresses in composite plates based on first-order shear deformation theory. Computer Methods in Applied Mechanics and Engineering. 167:(3/4):1998;355-368.
69. Rolfes R., Rohwer K., Ballerstaedt M. Efficient linear transverse normal stress analysis of layered composite plates. Computers and Structures. 68:1998;643-652.
70. Noor A.K. Finite element buckling and postbuckling analyses. Turvey G.J., Marshall I.H. Buckling and postbuckling of composite plates. 1995;58-107 Chapman and Hall, London.
71. Noor A.K. Buckling and postbuckling of composite structures, Proc. of the Symposium on Buckling and Postbuckling of Composite Structures, ASME International Mechanical Engineering Congress and Exposition, Chicago, IL, November 6-11, 1994, AD- vol. 41/PVP-vol. 293. 1994;The American Society of Mechanical Engineers, New York.
72. Noor A.K., Burton W.S. Three dimensional solutions for the thermal buckling and sensitivity derivatives of temperature-sensitive multilayered angle-ply plates. Journal of Applied Mechanics. 59:(4):1992;848-856.
73. Noor A.K., Starnes J.H. Jr, Peters J.M. Nonlinear and postbuckling responses of curved composite panels with cutouts. Composite Structures. 34:(2):1996;213-240.
74. Noor A.K., Kim Y.H. Buckling and postbuckling of composite panels with cutouts subjected to combined edge shear and temperature change. Computers and Structures. 60:(2):1996;203-222.
75. Noor A.K., Starnes J.H. Jr, Peters J.M. Thermomechanical buckling and postbuckling responses of composite panels with skewed stiffeners. Finite Elements in Analysis and Design. 27:(2):1997;193-214.
76. Noor A.K., Starnes J.H. Jr, Peters J.M. Curved sandwich panels subjected to temperature gradient and mechanical loads. Journal of Aerospace Engineering, ASCE. 10:(4):1997;143-161.
77. Noor A.K., Peters J.M. Analysis of curved sandwich panels with cutouts subjected to combined temperature gradient and mechanical loads. Journal of Sandwich Structures and Materials. 1:1999;42-59.
78. Noor A.K., Tenek L.H. Steady-state nonlinear heat transfer in multilayered composite panels. Journal of Engineering Mechanics, ASCE. 118:(8):1992;1661-1678.
79. Rolfes R. Higher-order theory and finite element for heat conduction in composites. Lewis R.W., Chin J.H., Homsy G.M. Proc. of the Seventh International Conference on Numerical Methods in Thermal Problems, Paris, vol. 7. 1991;880-889.
80. Chamis CC, Hopkins DA. Probabilistic composite design. In: Hooper SJ, editor. Composite materials: testing and design, vol. 13, ASTM STP-1242, Philadelphia, PA: American Society for Testing and Materials, 1997. p. 23-42.
81. Chamis CC, Murthy PLN, Minnetyan L. Progressive fracture in composite structures. In: Armanios EA, editor. Composite materials: fatigue and fracture, vol. 6, ASTM STP-1285, Philadelphia, PA: American Society for Testing and Materials, 1997. p. 70-84.
82. Minnetyan L., Chamis C.C., Murthy P.L.N. Structural behavior of composites with progressive fracture. Journal of Reinforced Plastics and Composites. 11:(4):1992;413-442.
83. Chamis C.C., Abumeri G.H., Patnaik S.N. Multi-scale multi-level multidisciplinary analysis and design for engine structures. Proc. 7th AIAA/USAF/ NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, St. Louis, MO, September 2-4, 1998, Part 2, AIAA :1998;1187-1197.
84. Tani J., Takagi T., Qiu J. Intelligent material systems: application of functional materials. Applied Mechanics Reviews. 51:(8):1998;505-521.
85. Brebbia C.A., Marchetti M., Santini P. Smart structures '98. Computational methods for smart structures and materials. 1998;WIT Press, Southampton, UK.
86. Tang Y.Y., Noor A.K., Xu K.-M. Assessment of computational models for thermo-electro-elastic multilayered plates. Computers and Structures. 61:(5):1996;915-933.
87. Xu K.-M., Noor A.K., Tang Y.Y. Three-dimensional solutions for free vibrations of initially-stressed thermo-electro-elastic multilayered plates. Computer Methods in Applied Mechanics and Engineering. 141:(1/2):1997;125-139.
88. Xu K.-M., Noor A.K. Three-dimensional analytical solutions for coupled thermo-electro-elastic response of multilayered cylindrical shells. AIAA Journal. 34:(4):1996;802-812.
89. Xu K.-M., Noor A.K. Predictor-corrector finite element approach for electro-elastic analysis of hybrid composite plates. Computer Methods in Applied Mechanics and Engineering. 147:(1/2):1997;139-145.
90. Halford G.R. Cumulative fatigue damage modeling: crack nucleation and early growth. International Journal of Fatigue. 19:(1):1997;5253-5260.
91. Mitchell MR, Landgraf RW, editors. Advances in fatigue lifetime predictive techniques, STP-1122. Philadelphia, PA: American Society for Testing and Materials, 1992.
92. Noor AK, et al. (compilers). Computational methods for failure analysis and life prediction. Proc. of the Workshop, NASA Langley Research Center, Hampton, VA, October 14-15, 1992, NASA CP-3230, 1993.
93. Sun J.Q., Miles R.N. Acoustic fatigue life prediction for nonlinear structure. Journal of Sound and Vibration. 150:(3):1991;531-535.
94. Miles R.N. Effect of spectral shape on acoustic fatigue life estimates. Journal of Sound and Vibration. 153:1992;376-386.
95. Reifsnider KL. Performance simulation: a new approach to the prediction of remaining strength and life of material systems. In: Kobayashi A, editor, Achievement in composites in Japan and the United States. Proc. of the Japan-U.S. CCM-V, Tokyo, 1990. p. 3-9.
96. Reifsnider K.L. Fatigue of composite materials. 1990;Elsevier Science Publishers, New York.
97. Arnold SM, Kruch S. Differential continuum damage mechanics models for creep and fatigue of unidirectional metal matrix composites, NASA TM-105213, November 1991.
98. Binienda WK, Arnold SM, Tan HQ. Application of symbolic computations to damage growth in multi-cracked brittle materials. HITEMP Review 1991;CP-10082:30(1/2).
99. Kerr JR, Haskins JF. Time temperature-stress capabilities of composite materials for advanced supersonic technology application, NASA CR-178272, May 1987.
100. Johnson WS. Damage development in titanium metal matrix composites subjected to cyclic loading, NASA TM-107597, April 1992.
101. Zaretsky EV, editor. MMC life system development (Phase I): A NASA/Pratt and Whitney life prediction cooperative program, NASA Reference Publication 1361, Nov. 1996.
102. Nemeth N.N., et al. Durability evaluation of ceramic components using CARES/LIFE. Journal of Engine Gas Turbines Power. 118:1996;150-158.
103. Belytschko T., Englemann B.E., Liu W.K. A review of recent developments in time integration. Noor A.K., Oden J.T. State-of-the-art surveys on computational mechanics. 1989;185-199 The American Society of Mechanical Engineers, New York.
104. Smolinski P. A variable multi-step method for transient heat conduction. Computer Methods in Applied Mechanics and Engineering. 86:1991;61-71.
105. Smolinski P. Stability of variable explicit time integration for unsteady diffusion problems. Computer Methods in Applied Mechanics and Engineering. 93:1991;247-252.
106. Hulbert G.M., Hughes T.J.R. Space-time finite element methods for second-order hyperbolic equations. Computer Methods in Applied Mechanics and Engineering. 84:1990;327-348.
107. Hulbert G.M. Time finite element methods for structural dynamics. International Journal for Numerical Methods in Engineering. 33:1992;307-331.
108. Hulbert G.M. Discontinuity-capturing operators for elastodynamics. Computer Methods in Applied Mechanics and Engineering. 96:1992;409-426.
109. Karaoglan L., Noor A.K. Space-time finite element methods for the sensitivity analysis of contact/impact response of axisymmetric composite structures. Computer Methods in Applied Mechanics and Engineering. 144:(3/4):1997;371-389.
110. Liu W.K., Zhang Y., Ramirez M.R. Multiple scale finite element methods. International Journal for Numerical Methods in Engineering. 32:1991;969-990.
111. Zhong Z-H, Mackerle J. Contact-impact problems: a review with bibliography. Applied Mechanics Reviews. 47:(2):1994;55-76.
112. Zhong Z.-H. Finite element procedures for contact-impact problems. 1993;Oxford University Press, Oxford, UK.
113. Noor AK, Carden HD (compilers). Computational methods for crashworthiness, Proc. of the Workshop, Sept. 2-3, 1992, NASA Langley Research Center, Hampton, VA, NASA CP-3223, August 1993.
114. Wriggers P. Finite element algorithms for contact problems. Archives of Computational Methods in Engineering. 2:(4):1995;1-49.
115. Bathe K.J., Bouzinov P.A. On the constraint function method for contact problems. Computers and Structures. 64:(5/6):1997;1069-1085.
116. Bathe K.J., Guillermin O., Walczak J., Chen H.-Y. Advances in nonlinear finite element analysis of automobiles. Computers and Structures. 64:(5/6):1997;881-891.
117. Mackerle J. Contact mechanics - finite element and boundary element approaches: A bibliography (1995-1997). Finite elements in analysis and design. 29:1998;275-285.
118. Brebbia C.A., Jones N., Manolis G.D., Talaslidis D.G. SUSI 98. Structures under shock and impact V. 1998;WIT Press, Southampton, UK.
119. Mamalis A.G., Manolakos D.E., Demosthenous G.A., Ioannidis M.B. Crashworthiness of composite thin-Walled structural components. 1998;Technomic, Lancaster, PA.
120. Huston R.L. Multibody dynamics: modeling and analysis methods. Applied Mechanics Reviews. 44:(3):1991;109-117.
121. Haug E.J. Dynamics of articulated structures. Noor A.K., Venneri S.L. Monograph on flight-vehicle materials, structures and dynamics: assessment and future directions. Structural dynamics and aeroelasticity. vol. 5:1993;45-53 The American Society of Mechanical Engineers, New York. [chapter 5].
122. Huston R.L. Multibody dynamics since 1990. Applied Mechanics Reviews. 49:(10):1996;S35-40.
123. Shabana A.A. Flexible multi-body dynamics: review of past and recent developments. Multi-body System Dynamics. 1:1997;189-222.
124. Elishakoff I. Essay on uncertainties in elastic and viscoelastic structures: from AM Freudenthal's criticism to modern convex modeling. Computers and Structures. 56:(6):1995;871-895.
125. Elishakoff I. Three versions of the finite element method based on concepts of either stochasticity, fuzziness, or anti-optimization. Applied Mechanics Reviews. 51:(3):1998;209-218.
126. Araujo J.M., Awruch A.M. Stochastic finite elements for structural analysis. Computers and Structures. 52:(3):1994;461-469.
127. Kleiber M., Hien T.D. The stochastic finite element method. 1992;Wiley, New York.
128. Noor AK, Malone JB (compilers). Computational tools and facilities for the next-generation analysis and design environment, Proc. of the Workshop, September 17-18, 1996, Hampton, VA, NASA CP-3346, March 1997.
129. Wasfy T.M., Noor A.K. Application of fuzzy sets to transient analysis of space structures. Finite Elements in Analysis and Design. 29:1998;153-171.
130. Abdel-Tawab K, Noor AK. A fuzzy-set analysis for a dynamic thermo-elasto-visco-plastic damage response. Computers and Structures 1999;70(1):91-107.
131. Qiu Z., Elishakoff I. Anti-optimization of structures with large uncertain but non-random parameters via interval analysis. Computer Methods in Applied Mechanics and Engineering. 152:(3/4):1998;361-372.
132. Kleiber M. Computer-assisted qualitative mechanics: an exemplary simulation of a 'Snap-Through' problem. Computers and Structures. 52:(6):1994;1261-1268.
133. Kulpa Z., Pownuk A., Skalna I. Analysis of linear mechanical structures with uncertainties by means of interval methods. Computer Assisted Mechanics and Engineering Sciences. 5:(4):1998;1-38.
134. Kulpa Z, Radomski A, Gajl O, Kleiber M, Skalna I. Hybrid expert system for qualitative and quantitative analysis of mechanical structures. In: Ironi L, editor. Qualitative Reasoning: 11th Int. Workshop, Cortona, Italy, June 3-6, 1997, p. 287-93, Publ. No. 1036, Istituto di Analisi Numerica CNR, Pavia, Italy, 1997.
135. Topping B.H.V., Bahreininejad A. Neural computing for structural mechanics. 1997;Saxe-Coburg, Edinburgh, UK.
136. Noor A.K., Andersen C.M. Hybrid analytical technique for the nonlinear analysis of curved beams. Computers and Structures. 43:(5):1992;823-830.
137. Noor A.K. Recent advances and applications of reduction methods. Applied Mechanics Reviews. 47:(5):1994;125-146.
138. Kobayashi A.S. Hybrid experimental-numerical stress analysis. Kobayashi A.S. Handbook of experimental mechanics. 2nd ed. 1993;751-783 Wiley-VCH, Weinheim, Berlin.
139. Szewczyk Z.P., Noor A.K. A hybrid neuro-computing/numerical strategy for nonlinear structural analysis. Computers and Structures. 58:(4):1996;661-678.
140. Szewczyk Z.P., Noor A.K. A hybrid neuro-computing strategy for sensitivity analysis of nonlinear structures. Computers and Structures. 65:(6):1997;869-880.
141. Ghaboussi J, Pecknold DA, Zhang M, Haj-Ali RM. Auto-progressive training of neural network constitutive models. International Journal for Numerical Methods in Engineering 1998;42:105-26.
142. Shephard MS, Weatherill NP, editors. Adaptive meshing; special issue of International Journal for Numerical Methods in Engineering 1991;32(4).
143. Noor A.K. Adaptive, multilevel and hierarchical computational strategies, Proc. of the symposium, ASME Winter Annual Meeting, Nov. 8-13, 1992, Anaheim, CA, AMD-157. 1992;The American Society of Mechanical Engineers, New York.
144. Demkowicz L, Oden JT, Babuska I. Reliability in computational mechanics; special issue of Computer Methods in Applied Mechanics and Engineering 1992;101(1-3).
145. Lee N.-S., Bathe K.J. Error indicators and adaptive remeshing in large deformation finite element analysis. Finite Elements in Analysis and Design. 16:1994;99-136.
146. Verfurth R. A posteriori error estimation and adaptive mesh-refinement techniques. 1996;Wiley, Chichester, UK.
147. Ladeveze P., Oden J.T. Advances in adaptive computational methods. 1998;Elsevier Science, New York.
148. Stewart J.R., Hughes T.J.R. A tutorial in elementary finite element error analysis: a systematic presentation of a priori and a posteriori error estimates. Computer Methods in Applied Mechanics and Engineering. 158:(1/2):1998;1-22.
149. Zhu J.Z. A posteriori error estimation: the relationship between different procedures. Computer Methods in Applied Mechanics and Engineering. 150:(1-4):1997;411-422.
150. Babuska I., Strouboulis T., Gangaraj S.K., Upadhyay C.S. Pollution error in the h-version of the finite element method and the local quality of the recovered derivatives. Computer Methods in Applied Mechanics and Engineering. 140:(1/2):1997;1-37.
151. Babuska I., Strouboulis T., Gangaraj S.K., Copps K., Datta D.K. Practical aspects of a-posteriori estimation for reliable finite element analysis. Computers and Structures. 66:(5):1998;627-664.
152. Krizek M., Neittaanmaki P. On super-convergence techniques. Acta Applicandae Mathematicae. 9:1987;175-198.
153. Babuska I., Miller A. The postprocessing approach in the finite element method - part I: calculation of displacements, stresses and other higher derivatives of the displacements. International Journal for Numerical Methods in Engineering. 20:1984;1085-1109.
154. Zienkiewicz O.C., Zhu J.Z. The super-convergent patch recovery and a posteriori error estimates. part I: the recovery technique. International Journal for Numerical Methods in Engineering. 33:1992;1331-1364.
155. Zienkiewicz O.C., Zhu J.Z., Wu J. Super-convergent patch recovery techniques: some further tests. Communications in Numerical Methods in Engineering. 9:(3):1993;251-258.
156. Tabbara M., Blacker T., Belytschko T. Finite element derivative recovery by moving least square interpolants. Computer Methods in Applied Mechanics and Engineering. 117:(1/2):1994;211-223.
157. Zhang Z., Zhu J.Z. Analysis of the super-convergent patch recovery technique and a posteriori error estimator in the finite element method (I). Computer Methods in Applied Mechanics and Engineering. 123:1995;173-187.
158. Zhang Z., Zhu J.Z. Analysis of the super-convergent patch recovery technique and a posteriori error estimator in the finite element method (II). Computer Methods in Applied Mechanics and Engineering. 163:(1-4):1998;159-170.
159. Lee T., Park H.C., Lee S.W. A super-convergent stress recovery technique with equilibrium constraint. International Journal for Numerical Methods in Engineering. 40:(6):1997;1139-1160.
160. Tenchev R.T. A study of the accuracy of some FEM stress recovery schemes for two dimensional stress concentration problems. Finite Elements in Analysis and Design. 29:1998;105-119.
161. Yazdani A.A., Gakwaya A., Dhatt G. An improved super-convergent patch recovery technique for the axisymmetrical problems. Computers and Structures. 66:(6):1998;799-821.
162. Fish J., Markolefas S. Adaptive s-method for linear elastostatics. Computer Methods in Applied Mechanics and Engineering. 104:1993;363-396.
163. Fish J., Markolefas S. Adaptive global-local refinement strategy based on the interior error estimates of the h-method. International Journal for Numerical Methods in Engineering. 37:1994;827-838.
164. Wiberg N.-E., Li X.D., Abdulwahab F. Adaptive finite element procedures in elasticity and plasticity. Engineering with Computers. 12:1996;120-141.
165. Lee C.K., Lo S.H. Automatic adaptive three dimensional finite element refinement using different-order tetrahedral elements. International Journal for Numerical Methods in Engineering. 40:1997;2195-2226.
166. Rashid M.M. The arbitrary local mesh replacement method: an alternative to remeshing for crack propagation analysis. Computer Methods in Applied Mechanics and Engineering. 154:(1/2):1998;133-150.
167. Dechaumphai P. Adaptive unstructured meshing for thermal stress analysis of built-up structures. Proc. of the 33rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, April 13-15, 1992, Dallas, TX, Part 2 :1992;1069-1077.
168. Dechaumphai P., Thornton E.A., Weiting A.R. Flow-thermal-structural study of aerodynamically heated leading edges. Journal of Spacecraft. 26:(4):1989;201-209.
169. Wieting A.R., Dechaumphai P., Bey K.S. Application of integrated fluid-thermal-structural analysis method. Thin-Walled Structures. 11:1991;1-23.
170. Multiple Field Methods. In Spectrum Solver Theory Manual, Version 2.0, chap. 4, Centric Engineering Systems, Sunnyvale, CA, 1997.
171. Bathe K.J. Simulation of structural and fluid flow response in engineering practice. Computer Modeling and Simulation in Engineering. 1:1996;47-77.
172. Bathe K.J., Zhang H., Zhang X. Some advances in the analysis of fluid flows. Computers and Structures. 64:(5/6):1997;909-930.
173. Kleiber M., Hisada T. Design-sensitivity analysis. 1993;Atlanta Technology Publications, Atlanta, GA.
174. Hinton E., Sienz J. Aspects of adaptive finite element analysis and structural optimization. Topping B.H.V., Papadrakakis M. Advances in structural optimization. 1994;1-25 CIVIL-COMP, Edinburgh.
175. Squire W., Trapp G. Using complex variables to estimate derivatives of real functions. SIAM Review. 40:(1):1998;110-112.
176. Haber R.B., Tortorelli D.A., Vidal C.A. Design sensitivity analysis of nonlinear structures - I: large deformation hyperelasticity and history dependent material response. Kamat M.P. Structural optimization: status and promise. 1993;369-406 American Institute of Aeronautics and Astronautics, Washington, DC.
177. Kleiber M., Antunez H., Hien T.D., Kowalczyk P. Parameter sensitivity in nonlinear mechanics: theory and finite element computations. 1997;Wiley, New York.
178. Kirsch U. Efficient sensitivity analysis for structural optimization. Computer Methods in Applied Mechanics and Engineering. 117:(1/2):1994;143-156.
179. Kleiber M., Hien T.D., Postek E. Incremental finite element sensitivity analysis for nonlinear mechanics applications. International Journal for Numerical Methods in Engineering. 37:(19):1994;3291-3308.
180. Kulkarni M., Noor A.K. Sensitivity analysis of the nonlinear dynamic viscoplastic response of two dimensional structures with respect to material parameters. International Journal for Numerical Methods in Engineering. 38:1995;183-198.
181. Noor A.K., Needleman A., Peters J.M. Sensitivity analysis for failure and damage in dynamically loaded tensile bars. Computer Methods in Applied Mechanics and Engineering. 151:(3/4):1998;461-478.
182. Chinchalker S. The application of automatic differentiation to problems in engineering analysis. Computer Methods in Applied Mechanics and Engineering. 118:1994;197-207.
183. Green L.L., Newman P.A., Haigler K.J. Sensitivity derivatives for advanced CFD algorithm and viscous modeling parameters via automatic differentiation. Journal of Computational Physics. 125:1996;313-324.
184. Sherman L.L., Taylor III A.C., Green L.L., Newman P.A., Hou G.W., Korivi V.M. First and second-order aerodynamic sensitivity derivatives via automatic differentiation with incremental iterative methods. Journal of Computational Physics. 129:1996;307-331.
185. Follen G., Evans A.L., Naiman C., Lopez I. Numerical propulsion system simulation's national cycle program. AIAA/ASME/ASCE/SAE/ASEE 34th Joint Propulsion Conference and Exhibit, Cleveland, OH, July 13-15 :1998;. AIAA-98-3113.
186. Topping B.H.V., Khan A.I. Parallel finite element computations. 1996;Saxe-Coburg, Edinburgh, UK.
187. Hendrickson B, Leland R. An improved spectral graph partitioning algorithm for mapping parallel computations. Sandia National Labs, TR-SAND92-1460, 1992.
188. Barnard ST, Simon H. A parallel implementation of multilevel recursive spectral bisection for application to adaptive unstructured meshes. Proc. of the Seventh SIAM Conference on Parallel Processing for Scientific Computing 1995;18:627-32.
189. Khan A.I., Topping B.H.V. Sub-domain generation for parallel finite element analysis. Computing Systems in Engineering. 4:(4-6):1993;473-488.
190. Watson B.C., Noor A.K. Sensitivity analysis for large-deflection and postbuckling responses on distributed-memory computers. Computer Methods in Applied Mechanics and Engineering. 129:1996;393-409.
191. Watson B.C., Noor A.K. Large scale contact/impact simulation and sensitivity analysis on distributed-memory computers. Computer Methods in Applied Mechanics and Engineering. 141:(3-4):1997;373-388.
192. George P.L. Automatic mesh generation: application to finite element methods. 1991;Wiley and Masson, New York.
193. Frykestig J. Advancing front mesh generation techniques with application to the finite element method, Department of Structural Mechanics, Chalmers University of Technology, Rept. 94:10, Gotenborg, Sweden, 1994.
194. Tworzydlo W.W., Oden J.T. Towards an automated environment in computational mechanics. Computer Methods in Applied Mechanics and Engineering. 104:1993;87-143.
195. Chandra S., Woodman N.J., Blockley D.I. An object-oriented structure for transient dynamics on concurrent computers. Computers and Structures. 51:(4):1994;437-452.
196. Kecskemethy A., Hiller M. An object-oriented approach for an effective formulation of multi-body dynamics. Computer Methods in Applied Mechanics and Engineering. 115:(3-4):1994;287-314.
197. Besson J., Foerch R. Large scale object-oriented finite element code design. Computer Methods in Applied Mechanics and Engineering. 142:(1-2):1997;165-187.
198. Mackie R.I. Using objects to handle complexity in finite element software. Engineering with Computers. 13:1997;99-111.
199. Eyheramendy D., Zimmermann Th. Object-oriented finite elements. III: theory and application of automatic programming. Computer Methods in Applied Mechanics and Engineering. 154:(1-2):1998;41-68.
200. Zimmermann Th., Bomme P., Eyheramendy D., Vernier L., Commend S. Aspects of an object-oriented finite element environment. Computers and Structures. 68:(1-3):1998;1-16.
201. Dubois-Pelerin Y., Pegon P. Object-oriented programming in nonlinear finite element analysis. Computers and Structures. 68:(4):1998;225-241.
202. Devloo P.R.B. Efficiency issues in an object-oriented programming environment. Topping B.H.V., Papadrakakis M. Artificial intelligence and object-oriented approaches for structural engineering. 1994;147-151 CIVIL-COMP, Edinburgh.
203. Denning P.J., Metcalfe R.M. Beyond calculation: the next fifty years of computing. 1997;Springer-Verlag, New York.
204. Foster I., Kesselman C. The grid: blueprint for a new computing infrastructure. 1999;Morgan Kaufmann, San Francisco, CA.
205. Noor A.K. New computing systems and future high performance computing environments and their impact on structural analysis and design. Computers and Structures. 64:(1-4):1997;1-30.
206. Holtz W.B. The CAD rating guide. 5th ed. 1997;PennWell, Nashua, NH.
207. Kumar B. (guest editor). Information technology in civil and structural engineering design, Computers and Structures (special issue) 1998;67(5).
208. Hughes T.J.R., Stewart J. A space time formulation for multi-scale phenomena. Journal of Comput. Applied Math. 74:1996;217-229.
209. Hughes T.J.R., Feijoo G.R., Mazzei L., Quincy J.-B. The variational multiscale method: a paradigm for computational mechanics. Computer Methods in Applied Mechanics and Engineering. 166:(1/2):1998;3-24.
210. Noor AK (compiler). Computational intelligence and its impact on future high performance engineering systems, Proc. of the Workshop, June 27-28, 1995, Hampton, VA, NASA CP-3323, January 1996.