Variations on modeling of constrained-layer damping treatments

Shock and Vibration Digest

Volumn 31, Issue 4, 1999, Pages 275-280

  Austin, Eric M ^a  

^a VIRGINIA POLYTECHNIC INSTITUTE AND STATE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CONSTRAINT THEORY; DAMPING; MATHEMATICAL MODELS; VIBRATION CONTROL;

CONSTRAINED-LAYER DAMPING (CLD) TREATMENTS; MODAL STRAIN ENERGY (MSE) METHOD;

VIBRATIONS (MECHANICAL);

EID: 0033153918     PISSN: 05831024     EISSN: None     Source Type: Journal    
DOI: 10.1177/058310249903100401     Document Type: Article

References (54)

1. Agnes, G. S., 1995, "Toward single-element modeling of multi-layer constrained layer damping treatments," Proceedings of SPIE's 1995 Symposium on Smart Structures and Materials, vol. 2445, Passive Damping and Isolation, 336-347.
2. Austin, E. M., 1998, "Influences of higher order modeling techniques on the analysis of layered viscoelastic damping treatments," Ph.D. thesis, Virginia Polytechnic Institute and State University.
3. Austin, E. M., and Inman, D. J., 1998, "Modeling of sandwich structures," SPIE's 5th Annual International Symposium on Smart Structures and Materials, vol. 3327, Passive Damping and Isolation.
4. Austin, E. M., and Inman, D. J., 1999, "Effects of modeling assumptions of loss factors predicted for viscoelastic sandwich beams," SPIE's 6th Annual International Symposium on Smart Structures and Materials, vol. 3672, Passive Damping and Isolation.
5. Bai, J. M., and Sun, C. T., 1993, "A refined theory of flexural vibration for viscoelastic damped sandwich beams," Proceedings of Damping '93, San Francisco, JBBI-JBB16.
6. Bai, J. M., and Sun, C. T., 1995, "The effect of viscoelastic adhesive layers on structural damping of sandwich beams," Mech. Struct. Machines 23(1), 1-16.
7. Bhimaraddi, A., 1995, "Sandwich beam theory and the analysis of constrained layer damping," J. Sound Vibration 179(4), 591-602.
8. DiTaranto, R. A., 1965, "Theory of vibratory bending for elastic and viscoelastic layered finite-length beams," J. Appl. Mech. 32, 881-886.
9. Douglas, B. E, 1986, "Compressional damping in three-layer beams incorporating nearly incompressible viscoelastic cores," J. Sound Vibration 104(2), 343-347.
10. Douglas, B. E, and Yang, J.C.S., 1978, "Transverse compressional damping in the vibratory response of elastic-viscoelastic-elastic beams," AIAA J. 16(9), 925-930.
11. Dubbelday, P. S., 1986, "Constrained-layer model investigation based on exact elasticity theory," J. Acoust. Soc. Am. 80(4), 1097-1102.
12. Garrison, M. R., Miles, R. N., Sun, J. Q., and Bao, W., 1994, "Random response of a plate partially covered by a constrained layer damper," J. Sound Vibration 172(2), 231-245.
13. He, S., and Rao, M. D., 1992, "Vibration analysis of adhesively bonded lap joint, Part 1: Theory," J Sound Vibration 153(3), 405-416.
14. He, S., and Rao, M. D., 1994, "Residual stresses and delamination problems induced by cocuring of damped composite laminates, J. Composite Mat. 28(2), 112-129.
15. Ikegami, R., Beck, C. J., and Walker, W. J., 1984, "Application of damping to improve reliability of IUS-type satellite equipment - RELSAT program," Vibration Damping 1984 Workshop Proceedings, Long Beach, California, TT1-TT15.
16. Imaino, W., and Harrison, J. C., 1991, "A comment on constrained layer damping structures with low viscoelastic modulus," J Sound Vibration 149(2), 354-359.
17. Johnson, C. D., 1995a, "Design of passive damping systems," J. Mechanical Design and J. Vibration Acoust. 117(B), 171-176.
18. Johnson, C. D., ed., 1995b, Proceedings of SPIE's 1995 Symposium on Smart Structures and Materials, vol. 2445, Passive Damping and Isolation.
19. Johnson, C. D., Kienholz, D. A., and Rogers, L. C., 1981, "Finite element prediction of damping in beams with constrained viscoelastic layers, Shock Vibration Bull. 51(1), 71-81.
20. Kerwin, E. M., 1959, "Damping of flexural waves by a constrained visco-elastic layer," J. Acoust. Soc. Am. 31, 952-962.
21. Kerwin, E. M., and Ross, D., 1959, "A comparison of the effectiveness of homogeneous layers and constrained layers of viscoelastic material in damping flexural waves in plates," 3rd International Congress on Acoustics, Stuttgart, 410-412.
22. Lall, A. K., Asnani, N. T., and Nakra, B. C., 1988, "Damping analysis of partially covered sandwich beams," J. Sound Vibration 123(2), 247-259.
23. Lee, B.-C., and Kim, K.-J., 1997, "Effects of normal strain in core material on modal property of sandwich plates," J. Vibration Acoust. 119, 493-503.
24. Lee, C.-Y., and Liu, D., 1992, "An interlaminar stress continuity theory for laminated composite analysis," Composites Struct. 42(1), 69-78.
25. Librescue, L., and Reddy, J. N., 1989, "A few remarks concerning several refined theories of anisotropic composite laminated plates," Int. J. Eng. Sci. 27(5), 515-527.
26. Liénard, P., 1951, "Étude d'une méthode de mesure du frottement intérieur de revêtements plastiques travaillant en flexion," La Recherche Aéronautique 20, 11-22.
27. Mead, D. J., 1982, "A comparison of some equations for the flexural vibration of damped sandwich beams," J. Sound Vibration 83(3), 363-377.
28. Mead, D. J., and Markus, S., 1969, "The forced vibration of a three-layer, damped sandwich beam with arbitrary boundary conditions," J. Vibration Acoust. 10(2), 163-175.
29. Miles, R. N., 1984, "Beam dampers for skin vibration and noise reduction in the 747," Vibration Damping 1984 Workshop Proceedings, Long Beach, California, PP1-PP18.
30. Miles, R. N., and Reinhall, P. G., 1986, "An analytical model for the vibration of laminated beams including the effects of both shear and thickness deformation in the adhesive layer," J. Sound Vibration 108, 56-64.
31. Nakra, B. C., 1976, "Vibration control with viscoelastic materials," Shock Vibration Digest 8(6), 3-12.
32. Nakra, B. C., 1981, "Vibration control with viscoelastic materials - II," Shock Vibration Digest 13(1), 17-20.
33. Nakra, B. C., 1984, "Vibration control with viscoelastic materials - III," Shock Vibration Digest 16(5), 17-22.
34. Noor, A. K., and Burton, S. W., 1989, "Assessment of shear deformation theories for muatilayered composite plates," Appl. Mech. Rev. 42(1), 1-13.
35. Oberst, H., 1956, "Werkstoffe mit extrem hoher innerer dampfung," Acustica (Akustiche Beihefte) 6, 144-153.
36. Oberst, H., Backer, G. W., and Frankenfeld, K., 1954, "Über die dämpfung der biegeschwingungen dünner bleche durch fest haftende beläge II," Acustica 4, 433-444.
37. Oberst, H., and Frankenfeld, K., 1952, "Über die dämpfung der biegeschwingungen dünner bleche durch fest haftende beläge I," Acustica 2, 181-194.
38. Ojalvo, I. U., 1977, "Departures from classical beam theory in laminated, sandwich, and short beams," AIAA J. 15(10), 1518-1521.
39. Plass, H. J., 1957, "Damping of vibrations in elastic rods and sandwich structures by incorporation of additional viscoelastic material," 3rd Midwestern Conference on Solid Mechanics, 48-71.
40. Rao, M. D., and He, S., 1992, "Vibration analysis of adhesively bonded lap joint, Part II: Numerical solution," J. Sound Vibration 153(3), 417-425.
41. Reddy, J. N., 1989, "On refined computational models of composite laminates," Int. J. Numerical Methods Eng. 27(2), 361-382.
42. Reddy, J. N., 1990, "A review of refined theories of laminated composite plates," Shock Vibration Digest 22(7), 3-17.
43. Rogers, L. C., 1991, "Proceedings of Damping '91" Technical report WL-TR-91-3078, Air Force Wright Aeronautical Laboratories.
44. Ross, D., Ungar, E. E., and Kerwin, E. M., 1959, "Damping of plate flexural vibrations by means of viscoelastic laminae," Structural Damping - A Colloquium on Structural Damping Held at the ASME Annual Meeting, Atlantic City, New Jersey, 49-87.
45. Saito, H., and Tani, H., 1984, "Vibrations of bonded beams with a single lap adhesive joint," J. Sound Vibration 92(2), 299-309.
46. Staley, J. A., and Stahle, C. V., 1984, "Damping in support structures for satellite equipment reliability - RELSAT," Vibration Damping 1984 Workshop Proceedings, Long Beach, California, UU1-UU26.
47. Sylwan, O., 1987, "Shear and compressional damping effects of constrained layered beams," J. Sound Vibration 118(1), 35-45.
48. Taylor, T. W., and Nayfeh, A. H., 1994, "Natural frequencies of thick, layered composite plates," Composites Eng. 4(10), 1011-1021.
49. Taylor, T. W., and Nayfeh, A. H., 1996, "The vibration characteristics of thick rectangular multilayer plates," Composites Part B (Eng.) 27(6), 623-631.
50. Taylor, T. W., and Nayfeh, A. H., 1997, "Damping characteristics of laminated thick plates," J. Appl. Mech. 64, 132-138.
51. Taylor, T. W., Nayfeh, A. H., and Wade, J. E., 1994, "Dynamic response of thick anisotropic composite plates," Composites Eng. 4(5), 475-486.
52. Tessler, A., Saether, E., and Tsui, T., 1995, "Vibration of thick laminated composite plates," J. Sound Vibration 179(3), 475-498.
53. Torvik, P. J , 1980, "The analysis and design of constrained layer damping treatments," Proceedings of the ASME Winter Annual Meeting - Damping Applications for Vibration Control, 85-112.
54. Ungar, E. E., and Kerwin, E. M., 1962, "Loss factors of viscoelastic systems in terms of energy concepts," J. Acoust. Soc. Am. 34, 954-957.