Chloride-induced steel corrosion in concrete: Part 2 - Gravimetric and electrochemical comparisons

ACI Materials Journal

Volumn 96, Issue 3, 1999, Pages 306-313

  Baweja, Daksh ^a   Roper, Harold ^a   Sirivivatnanon, Vute ^a  

^a NONE

Author keywords

Blast furnace slag; Chlorides; Corrosion; Marine atmospheres

Indexed keywords

BINDERS; DURABILITY; ELECTROCHEMISTRY; GRAVIMETRIC ANALYSIS; PORTLAND CEMENT; SLAGS; STEEL CORROSION;

CHLORIDE INDUCED STEEL CORROSION; GRAVIMETRIC STEEL WEIGHT LOSS; WATER BINDER;

REINFORCED CONCRETE;

EID: 0033134551     PISSN: 0889325X     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (36)

1. Haynes, G., "Review of Laboratory Corrosion Tests and Standards," Corrosion Testing and Evaluation: Silver Anniversary Volume, ASTM STP 1000, R. Baobian and S. W. Dean, eds., American Society for Testing and Materials, Philadelphia, 1990, pp. 281-288.
2. McCuen, R. H.; Albrecht, P.; and Cheng, J., "A New Approach to Power-Model Regression of Corrosion Penetration Data," Corrosion Forms and Control for Infrastructure, ASTM STP 1137, V. Chaker, ed., American Society for Testing and Materials, Philadelphia, 1992, pp. 46-76.
3. Fasullo, E. J., "Infrastructure: The Battlefield of Corrosion," Corrosion Forms and Control for Infrastructure, ASTM STP 1137, V. Chaker, ed., American Society for Testing and Materials, Philadelphia, 1992, pp. 1-16.
4. Rasheeduzzafar, D. F. H.: Bader, M. A.; and Khan, M. M., "Performance of Corrosion Resisting Steels in Chloride-Bearing Concrete," ACI Materials Journal, V. 89, No. 5, Sept.-Oct. 1992, pp. 439-448.
5. Berke, N. S.; Shen, D. F.; and Sundberg, K. M., "Comparison of the Polarization Resistance Technique to the Macrocell Corrosion Technique," Corrosion Rates of Steel in Concrete, ASTM STP 1065, N. S. Berke, V. Chaker, and D. Whiting, eds., American Society for Testing and Materials, Philadelphia, 1990, pp. 38-51.
6. Roper, H., "Reinforcement for Concrete Structures Subject to Fatigue," Symposium Proceedings, Fatigue of Steel and Concrete Structures, LABSE, AIPC, IVBH, Lausanne, Switzerland, 1982, pp. 239-245.
7. Maldonado, L. A. et al., "Bond Loss between Epoxy and Alkyd-Coated Reinforcement Reinforcing Bars in Concrete," Corrosion Forms and Control for Infrastructure, ASTM STP 1137, V Chaker, ed., American Society for Testing and Materials, Philadelphia, 1992, pp. 372-385.
8. Suzuki, K. et al., "Some Phenomena of Macrocell Corrosion," Third International Symposium on Corrosion of Reinforcement in Concrete Construction, Society of the Chemical Industry, UK, May 1990, pp. 87-95.
9. Dagher, H. J., and Kulendran, S., "Finite Element Modeling of Corrosion Damage in Concrete Structures," ACI Structural Journal, V. 89, No. 6, Nov.-Dec. 1992, pp. 699-708.
10. Suzuki, K. et al., "Mechanism of Steel Corrosion in Cracked Concrete," Third International Symposium on Corrosion of Reinforcement in Concrete Construction, Society of the Chemical Industry, UK, May 1990, pp. 19-28.
11. Beeby, A. W., "Corrosion of Steel Reinforcement and Crack Widths," Brazil Offshore '79, Rio De Janeiro, Brazil, Oct. 8-12, 1979, 12 pp.
12. Beeby, A. W., "Cracking, Cover, and Corrosion of Reinforcement," 1981 ACI Spring Convention, American Concrete Institute, Dallas, Tex., Feb. 9-13, 1981, 9pp.
13. Mailvaganam, N. P. et al., "Evaluation of the Performance and Durability of Elastomeric Parking Garage Membrane Systems," Rehabilitation of Concrete Structures, Proceedings, International RILEMICSIRO/ACRA Conference, Melbourne, Australia, Sept. 1992, pp. 415-428.
14. Babaei, K., and Hawkins, N. M., "Performance of Rehabilitated/Protected Concrete Bridge Decks," Corrosion Forms and Control for Infrastructure, ASTM STP 1137, V. Chaker, ed., American Society for Testing and Materials, Philadelphia, 1992, pp. 140-154.
15. Berke, N. S. et al., "Impregnation of Concrete with Corrosion Inhibitors," Corrosion Forms and Control for Infrastructure, ASTM STP 1137, V. Chaker, ed., American Society for Testing and Materials, Philadelphia, 1992, pp. 300-327.
16. Andrade, C. et al., "Quantitative Measurement of the Corrosion Rate Using a Small Counter Electrode in the Boundary of Passive and Corroded Zones of a Long Concrete Beam," Corrosion Rates of Steel in Concrete, ASTM STP 1065, N. S. Berke, V. Chaker, and D. Whiting, eds., American Society for Testing and Materials, Philadelphia, 1990, pp. 134-142.
17. Dhir, R. K.; Jones, M. R.; and McCarthy, M. J., "Measurement of Reinforcement Corrosion in Concrete Structures," Concrete, Jan. 1991, pp. 15-19.
18. Isaacs, H. S., and Vyas, B., "Scanning Reference Electrode Techniques in Localized Corrosion," Electrochemical Corrosion Testing, ASTM STP 727, F. Mansfeld and U. Bertocci, eds., American Society for Testing and Materials, 1981, pp. 3-33.
19. American Society for Testing and Materials, "Standard Test Method for Conducting Cyclic Potentiodynamic Anodic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys," ASTM Standard G 61, 21 pp.
20. Rendell, F., and Miller, W., "Macrocell Corrosion of Reinforcement in Marine Structures," Third International Symposium on Corrosion of Reinforcement in Concrete Construction, Society of the Chemical Industry, UK, May 1990, pp. 167-177.
21. Cao, H. T., and Sirivivatnanon, V., "Corrosion of Steel in Concrete with and without Silica Fume," Cement and Concrete Research, V. 21, 1991, pp. 316-324.
22. Al-Tayyib, A. J., and Al-Zahrani, M., "Corrosion of Steel Reinforcement in Polypropylene Fiber Reinforced Concrete Structures," ACI Materials Journal, V. 87, No. 2, Mar.-Apr. 1990, pp. 108-113.
23. Postlethwaite, J., "Direct Measurement of the Corrosion Current for Oxygen-Reduction Corrosion," Electrochemical Corrosion Testing, ASTM STP 727, F. Mansfield and U Bettocci, eds., ASTM, 1981, pp. 290-302.
24. Dawson, J. L. et al., "Electrochemical Methods for the Inspection and Monitoring of Corrosion of Reinforcing Steel in Concrete," Third International Symposium on Corrosion of Reinforcement in Concrete Construction, Society of the Chemical Industry, UK, May 1990, pp. 358-371.
25. Berke, N. S.; Shen, D. F., and Sundberg, K. M., "Comparison of the Polarization Resistance Technique and the Macrocell Corrosion Technique," Corrosion Rates of Steel in Concrete, ASTM STP 1065, N. S. Berke, V. Chaker, and D. Whiting, eds., American Society for Testing and Materials, Philadelphia, 1990, pp. 38-51.
26. Aguilar, A.; Sagues, A. A.; and Powers, R. G.; "Corrosion Measurements of Reinforcing Steel in Partially Submerged Concrete Slabs," Corrosion Rates of Steel in Concrete, ASTM STP 1065, N. S. Berke, V. Chaker, and D. Whiting, eds., American Society for Testing and Materials, Philadelphia, 1990, pp. 66-85.
27. American Society for Testing and Materials, "Draft Standard Test Method for Determining the Effects of Chemical Admixtures on the Corrosion of Embedded Steel Reinforcement in Cracked Concrete Exposed to Chloride Environments," Philadelphia, 1992, 22 pp.
28. Elsener, B., and Bohni, H., "Potential Mapping and Corrosion of Steel in Concrete," Corrosion Rates of Steel in Concrete, ASTM STP 1065, N. S. Berke, V. Chaker, and D. Whiting, eds., American Society for Testing and Materials, Philadelphia, 1990, pp. 143-156.
29. Roper, H.; Sirivivatnanon, V.; and Baweja, D., "Long-Term Performance of Portland and Blended Cement Concretes under Marine Conditions," Third International Conference on Durability of Concrete, V. M. Malhotra, ed., SP145, American Concrete Institute, Farmington Hills, Mich., 1994, pp. 331-351.
30. Baweja, D. et al. "Measurement of the Corrosion of Steel Reinforcement under High-Chloride Conditions," Fourth International Conference on Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, V. M. Malhotra, ed., SP-134, American Concrete Institute, Farmington Hills, Mich., pp. 1543-1563.
31. Baweja, D., Roper, H.; and Sirivivatnanon, V, "Relationships between Anodic Polarization and Corrosion of Steel Reinforcement in Concrete," Cement and Concrete Research - An International Journal, V. 23, No. 6, 1993, pp. 1418-1430.
32. Baweja, D., "Steel Corrosion in Australian Portland and Blended Cement Concretes," PhD thesis, School of Civil and Mining Engineering, University of Sydney, Australia, 1994, 381 pp.
33. Baweja, D.; Roper, H.; and Sirivivatnanon, V, "Concretes for Aggressive Marine Environments: Performance and Specification," Second International Symposium on Blended Cements - Increasing its Usage in Concrete, Cement and Concrete Association of Malaysia, Kuala Lumpur, Malaysia, Nov. 10-11, 1994, pp. 13-18.
34. American Society for Testing and Materials, "Standard Practice for Preparing, Cleaning and Evaluating Corrosion Test Specimens," ASTM G1-1988, Philadelphia, 15 pp.
35. Baweja, D.; Roper, H.; and Sirivivatnanon, V, "Corrosion of Steel in Marine Concrete: Long-Term Half-Cell Potential and Resistivity Data," Third CANMET/ACI International Conference on Performance of Concrete in Marine Environment, SP-163, American Concrete Institute, Farmington Hills, Mich., 1996, pp. 89-110.
36. American Society for Testing and Materials, "Standard Reference Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements," ASTM G5-82, Philadelphia, 1982, 24 pp.