An axisymmetric membrane element with bending stiffness for static implicit sheet metal forming simulation

Journal of Applied Mechanics, Transactions ASME

Volumn 66, Issue 1, 1999, Pages 153-164

  Esche, S K ^a   Kinzel, G K ^b   Lee, J K ^b  

^a Stevens Institute of Technology   (United States)

^b Ohio State University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BENDING (FORMING); COMPUTER SIMULATION; FINITE ELEMENT METHOD; MEMBRANES; SHEET METAL;

AXISYMMETRIC MEMBRANE ELEMENTS;

STIFFNESS;

EID: 0033101320     PISSN: 00218936     EISSN: 15289036     Source Type: Journal    
DOI: 10.1115/1.2789142     Document Type: Article

References (40)

1. Agelet de Saracibar, C., and Onate, E., 1990, “Finite element analysis of sheet metal forming problems using a selective bending/membrane formulation,” Proceedings of the 3rd ICTP, Vol. 3, pp. 1409-1416.
2. Ahmetoglu, M. A., 1993, “A computer-aided engineering system for process design in sheet metal forming,” Ph.D. dissertation, The Ohio State University, Columbus, OH.
3. Brunet, M., and Sabourin, F., 1995, “Simplified triangular shell element with a necking criterion for 3-D sheet-forming analysis,” Journal of Materials Processing Technology, Vol. 50, pp. 238-251.
4. Budiansky, B., 1968, “Notes on Nonlinear Shell Theory,” ASME Journal of Applied Mechanics, Vol. 35, pp. 393-401.
5. Chung, T. J., 1988, Continuum Mechanics, Prentice-Hall, Englewood Cliffs, NJ.
6. Esche, S. K., 1997, “Developments for two-dimensional sheet metal forming analysis,” Ph.D. dissertation, The Ohio State University, Columbus, OH.
7. Esche, S. K., Kinzel, G. L., and Altan, T., 1997, “Issues in convergence improvements for nonlinear finite element programs,” International Journal for Numerical Methods in Engineering, Vol. 40, pp. 4577-4594.
8. Esche, S. K., and Kinzel, G. L., 1998, “The effect of modeling parameters and bending on two-dimensional sheet metal forming simulation,” Developments in Sheet Metal Stamping, SAE SP-1322, pp. 87-98.
9. Germain, Y., Chung, K., and Wagoner, R. H., 1989, “A rigid-viscoplastic finite element program for sheet metal forming analysis,” International Journal of Mechanical Sciences, Vol. 31, pp. 1-24.
10. Göldner, H., 1989, Lehrbuch Höhere Festigkeitslehre, VEB Fachbuchverlag, Leipzig.
11. Han, S. S., and Huh, H., 1995, “Modified-membrane finite-element simulation of square cup drawing processes considering influence of geometric parameters,” Journal of Materials Processing Technology, Vol. 48, pp. 81-87.
12. Hill, R., 1979, “Theoretical plasticity of textured aggregates,” Mathematical Proceedings of the Cambridge Philosophical Society, Vol. 85, pp. 179-191.
13. Huh, H., Han, S. S., and Yang, D. Y., 1993, “Rational finite element formulation for a membrane element in sheet metal forming analysis,” Proceedings of the 4th ICTP, Vol. 3, pp. 1529-1534.
14. Huh, H., Han, S. S., and Yang, D. Y., 1994, “Modified membrane finite element formulation considering bending effect in sheet metal forming analysis,” International Journal of Mechanical Sciences, Vol. 36, pp. 659-671.
15. Keum, Y. T., Nakamachi, E., Wagoner, R. H., and Lee, J. K., 1990, “Compatible description of tool surfaces and FEM meshes for analyzing sheet forming operations,” International Journal for Numerical Methods in Engineering, Vol. 30, pp. 1471-1502.
16. Kim, J. H., Oh, S. I., and Kobayashi, S., 1978, “Analysis of stretching of sheet metals with hemispherical punch,” International Journal of Machine Tool Design and Research, Vol. 18, pp. 209-226.
17. Lee, J. K., Cho, U. Y., Hambrecht, J., and Choudhry, S., 1991, “Recent advances in sheet metal forming analysis,” Advances in Finite Deformation Problems in Materials Processing and Structures, Winter Annual Meeting of the ASME, AMD-Vol. 125, pp. 119-130.
18. Makowski, J., and Nolle, L.-P., 1987, “Simple equations in terms of displacements for finite axisymmetric deflections of shells of revolution,” International Journal of Non-Linear Mechanics, Vol. 22, pp. 1-13.
19. Nakamachi, E., 1992, “Anisotropic elastic-plastic finite element simulation of 3-D sheet forming processes,” Proceedings of the 4th International Conference on Numerical Methods in Industrial Forming Processes: NUMIFORM 92, pp. 509-514.
20. Nakamachi, E., and Wagoner, R. H., 1992, “Finite element simulation of sheet forming using an efficient shell model,” Proceedings of the 3rd International Conference on Computational Plasticity: COMPLAS 92, pp. 1263-1276.
21. Oden, J. T., and Pires, E. B., 1983, “Nonlocal and Nonlinear Friction Law and Variational Principles for Contact Problems in Elasticity,” ASME Journal of Applied Mechanics, Vol. 50, pp. 67-76.
22. Onate, E., Agelet de Saracibar, C., and Dalin, J. B., 1989, “Finite element analysis of sheet metal forming problems using a selective voided viscous shell membrane formulation,” Proceedings of the 4th International Conference on Numerical Methods in Industrial Forming Processes: NUMIFORM 89, pp. 2330.
23. Onate, E., and Agelet de Saracibar, C., 1990, “Finite element analysis of sheet metal forming problems using a selective viscous bending/membrane formulation,” International Journal for Numerical Methods in Engineering, Vol. 30, pp. 1577-1593.
24. Onate, E., Cendoya, P., Rojek, J., and Miquel, J., 1996, “A simple thin shell triangle with translational degrees of freedom for sheet stamping analysis,” Proceedings of the 3rd International Conference on Numerical Simulation of 3-D Sheet Metal Forming, NUMISHEET 96, pp. 102-111.
25. Onate, E., and Cervera, M., 1993, “Derivation of thin plate bending elements with one degree of freedom per node: A simple three node triangle,” Engineering Computations, Vol. 10, pp. 543-561.
26. Pourboghrat, F., and Chandorkar, K., 1992, “Springback calculation for plane strain sheet forming using finite element membrane solution,” Numerical Methods for Simulation of Industrial Metal Forming Processes, M. J. Saran, A. B. Pifko, N. Kikuchi, and K. K. Tamma, eds., ASME, CED-Vol. 5, pp. 85-93.
27. Quoirin, D., 1992, “FEM modeling of 2D sheet metal forming processes,” Proceedings of the 4th International Conference on Numerical Methods in Industrial Forming Processes: NUMIFORM 92, pp. 527-533.
28. Sadagopan, S., 1997, “Adding bending resistance to 3-d membrane finite element programs,” Ph.D. dissertation, The Ohio State University, Columbus, OH.
29. Saran, M. J., Keum, Y. T., and Wagoner, R. H., 1991, “Section analysis with irregular tools and arbitrary draw-in conditions for numerical simulation of sheet forming,” International Journal of Mechanical Sciences, Vol. 33, pp. 893-909.
30. Saran, M. J., Schedin, E., Samuelsson, A., Melander, A., and Gustafsson, C., 1990, “Numerical and experimental investigations of deep drawing of metal sheets,” ASME Journal of Engineering for Industry, Vol. 112, pp. 212-211.
31. Saran, M. J., and Wagoner, R. H., 1991, “A Consistent Implicit Formulation for Nonlinear Finite Element Modeling With Contact and Friction: Part I—Theory,” ASME Journal of Applied Mechanics, Vol. 58, pp. 499-506.
32. Stoughton, T. B., 1985, “Finite element modeling of 1008 AK sheet steel stretched over a rectangular punch with bending effects. Computer modeling of sheet metal forming process; theory, verification and application,” N. M. Wang, and S. C. Tang, eds., Publication of The Metallurgical Society of AIME, pp. 143-159.
33. Wang, C., 1993, “Mechanics of bending, flanging, and deep drawing and a computer-aided modeling system for predictions of strain, fracture, wrinkling and springback in sheet metal forming,” Ph.D. dissertation, The Ohio State University, Columbus, OH.
34. Wang, C., and Wagoner, R. H., 1991, “Square punch forming: section analysis and bending study,” SAE Transactions, Vol. 100, pp. 742-750.
35. Wang, N. M., 1982, “A mathematical model of draw bead forces in sheet metal forming,” Journal of Applied Metalworking, Vol. 2, pp. 193-199.
36. Wang, N. M., 1984, “A rigid-plastic rate-sensitive finite element method for modeling sheet metal forming processes,” Numerical Analysis of Forming Processes, J. F. T. Pittman, O. C. Zienkiewicz, R. D. Wood, and J. M. Alexander, eds., John Wiley and Sons, New York, pp. 117-164.
37. Yang, D. Y., Jung, D. W., Song, I. S., Yoo, D. J., and Lee, J. H., 1995, “Comparative investigation into implicit, explicit, and iterative implicit/explicit schemes for the simulation of sheet-metal forming processes,” Journal of Materials Processing Technology, Vol. 50, pp. 39-53.
38. Yoo, D. J., Song, I. S., Yang, D. Y., and Lee, J. H., 1994, “Rigid-plastic finite element analysis of sheet metal forming processes using continuous contact treatment and membrane elements incorporating bending effects,” International Journal of Mechanical Sciences, Vol. 36, pp. 513-546.
39. Zhou, D., 1993, “Development and testing of a new algorithm for FEM of sheet forming,” Ph.D. dissertation, The Ohio State University, Columbus, OH.
40. Zhou, D., and Wagoner, R. H., 1995, “Development and application of sheet forming simulation,” Journal of Materials Processing Technology, Vol. 50, pp. 1-16.