Correlation of tensile strength with fracture modes of KAOWOOL- and SAFFIL-reinforced 339 aluminum

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 30, Issue 13, 1999, Pages 815-824

  Baxter, William J ^a   Sachdev, Anil K ^a  

^a GENERAL MOTORS CORPORATION   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

APPLIED STRESS; CALCULATED VALUES; COMPOSITE STRENGTH; DISCONTINUOUS FIBERS; FRACTURE MODE; INTERFACIAL BOND STRENGTH; INTERFACIAL BONDS; INTERFACIAL REACTIONS; MATRIX; MATRIX ALLOY; MATRIX STRENGTH; SAFFIL FIBERS; T6 HEAT TREATMENT; TEMPERATURE RANGE; TENSILE FAILURES; TRANSVERSE FIBERS; ULTIMATE TENSILE STRENGTH;

ALUMINUM; FIBERS; FRACTURE; MAGNESIUM; REINFORCED PLASTICS; ALUMINUM ALLOYS; BOND STRENGTH (MATERIALS); CERAMIC FIBERS; DELAMINATION; FAILURE ANALYSIS; FRACTURE MECHANICS; HEAT TREATMENT; METALLIC MATRIX COMPOSITES; STRESS ANALYSIS; TENSILE STRENGTH; THERMAL EFFECTS;

TENSILE STRENGTH; FIBER REINFORCED METALS;

ALUMINUM ALLOY 339; NANOINDENTATION TESTS;

EID: 0033100478     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-999-1014-8     Document Type: Article

References (41)

1. J. Dinwoodie, E. Moore, C.A.J. Langman, and W.R. Symes: Proc., 5th Int. Conf. on Composite Materials, San Diego, CA, W.C. Harrigan, J. Strife, and A.K. Dhingra, eds., TMS-AIME, Warrendale, PA, 1985, pp. 671-685
2. L. Ackermann, J. Charbonnier, G. Desplanches, and H. Koslowski: Proc., 5th Int. Conf. on Composite Materials, San Diego, CA, W.C. Harrigan, J. Strife, and A.K. Dhingra, eds., TMS-AIME, Warrendale, PA, 1985, pp. 687-698
3. S.J. Harris: NATO AGARD-CP-444, United States Department of Commerce, Washington, DC, 1988, pp. 25.1-25.13.
4. S.J. Harris and T.E. Wilks: 6th Int. Conf. on Composite Materials, F.L. Matthews, N.C.R. Buskell, J.M. Hodgkinson, and J. Morton, eds., Elsevier, New York, NY, 1987, pp. 2.113-2.127.
5. N.J. Hurd: Mater. Sci. Technol., 1988, vol.4, pp. 513-517
6. M. Levin and B. Karlsson: Composites, 1993, vol.24, pp. 288-295
7. X.C. Liu and C. Bathias: Fatigue Fract. Eng. Mater. Struct., 1992, vol.15, pp. 1113-1123
8. W.G. Spengler and W.B. Young: SAE SP657, SAE, Warrendale, PA, 1986, pp. 19-28.
9. N.J. Musson and T.M. Yue: Mater. Sci. Eng., 1991, vol.135, pp. 237-242
10. R. Munro: SAE SP657, SAE, Warrendale, PA, 1986, pp. 9-18.
11. E. DiRusso, C. Atzori, K. Chinnathambi, and C. Arcolin: Conf. Evolution of Advanced Materials, Milano, Italy, Association Italiana di Metallurgia, Milano, 1989, pp. 597-615.
12. D.L. Baty, J.P. Price, and B.G. Coleman: Conf. on Metal Matrix Composites, Philadelphia, PA, Society of Manufacturing Engineers, Dearborn, MI, 1987, technical paper no. EM87-573.
13. T.W. Clyne, M.G. Bader, G.R. Cappleman, and P.A. Hubert: J. Mater. Sci., 1985, vol.20, pp. 85-96.
14. C.M. Friend: J. Mater. Sci., 1987, vol.22, pp. 3005-3010
15. J. Bar, H.G. Klussman, and H.J. Gudladt: Scripta Metall. Mater., 1993, vol.29, pp. 787-792
16. M.R. Myers and F.K. Chi: SAE paper no. 910833, SAE, Warrendale, PA, 1991.
17. F.K. Chi, R.D. Maier, T.W. Krucek, M.D. Smalc, and B.O. Budinger: SAE paper no. 930183, SAE, Warrendale, PA, 1993.
18. R. Soave, J.M.M Leites, G. Ferran, C.W. Kuhn, and G.A. Gegel: SAE paper no. 940584, SAE, Warrendale, PA, 1994.
19. R. Soave, G. Ferran, A.C. Joaquim, and J.V.L. Sarabanda: SAE paper no. 930185, SAE, Warrendale, PA, 1993.
20. C.S. Liauo, H. Chang, J.C. Huang, and P.W. Kao: Metall. Mater. Trans. A, 1995, vol.26A, pp. 143-158
21. S. Canumalla, S.A. Dynan, D.J. Green, R.B. Bhagat, and R.N. Pangborn: J. Composite Mater., 1995, vol.29, pp. 653-670
22. T. Donomoto, K. Funatani, N. Miura, and N. Miyake: SAE paper no. 830252, SAE, Warrendale, PA, 1983.
23. T. Hayashi, H. Ushio, and M. Ebisawa: SAE paper no. 890557, SAE, Warrendale, PA, 1989.
24. M. Ebisawa, T. Hara, T. Hayashi, and H. Ushio: SAE paper no. 910835, SAE, Warrendale, PA, 1991.
25. W.J. Baxter: Metall. Trans. A, 1992, vol.23A, pp. 3045-3053
26. ICI Americas, Inc., Wilmington, DE.
27. W.J. Baxter and A.K. Sachdev: General Motors R&D Center, Warren, MI, unpublished research, 1995.
28. Thermal Ceramics, Inc., Augusta, GA.
29. Unifrax Inc., Niagara Falls, N.Y.
30. A.P. Clarke and S. Saimoto: in Micromechanics of Advanced Materials, S.N.G. Chu and J.C.M. Li, eds., TMS, Warrendale, PA, 1995, pp. 191-196
31. B. Bao, J.W. Hutchinson, and R.M. McMeeking: Acta Metall. Mater., 1991, vol.39, pp. 1871-1882
32. D.B. Zahl and R.M. McMeeking: Acta Metall. Mater., 1991, vol.39, pp. 1117-1122
33. V.D. Azzi and S.W. Tsai: Exp. Mech., 1965, vol.5 (9), pp. 283-288
34. V.C. Nardone and J.R. Strife: J. Mater. Sci., 1987, vol.22, pp. 592-600.
35. A. Kelly and W.R. Tyson: J. Mech. Phys. solids, 1965, vol.13, pp. 329-350
36. T.W. Clyne, M.G. Bader, C.R. Cappleman, and P.A. Hubert: J. Mater. Sci., 1985, vol.20, pp. 85-96.
37. M. Vogelsang, R.J. Arsenault, and R.M Fisher: Metall. Trans. A, 1986, vol.17A, pp. 379-389
38. T. Christman and S. Suresh: Acta Metall., 1988, vol.36, pp. 1691-1704.
39. I. Dutta and D.L. Bourell: Acta Metall., 1990, vol.38, pp. 2041-2049
40. K.M. Prewo and K.G. Kreider: Metall. Trans. A, 1972, vol.3, pp. 2201-2211
41. R. Mogilevsky, S.R. Bryan, W.S. Wolbach, T.W. Krucek, R.D. Maier, G.L. Shoemaker, J.M. Chabala, K.K. Soni, and R. Levi-Setti: Mater. Sci. Eng. A, 1995, vol.191, pp. 209-222