Computation of separated-flow transition using a two-layer model of turbulence

Journal of Turbomachinery

Volumn 121, Issue 1, 1999, Pages 78-87

  Rodi, W ^a  

^a UNIVERSITY OF KARLSRUHE   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

BUBBLE FORMATION; CORRELATION METHODS; LAMINAR FLOW; MATHEMATICAL MODELS; NUMERICAL ANALYSIS; REYNOLDS NUMBER; TRANSITION FLOW; TURBULENT FLOW;

LAMINAR SEPARATION; TURBULENT REATTACHMENT;

TURBOMACHINE BLADES;

AEROFOIL; MATHEMATICAL MODELING; SEPARATING FLOW; TURBULENCE;

EID: 0033018703     PISSN: 0889504X     EISSN: 15288900     Source Type: Journal    
DOI: 10.1115/1.2841236     Document Type: Article

References (33)

1. Abu-Ghannam, B. J., and Shaw, R., 1980, “Natural transition of Boundary Layers—The effects of turbulence, pressure gradient, and flow history,” J. of Mech. Engg. Science, Vol. 22, No. 5, pp. 213-228.
2. Arena, A. V., and Mueller, T. J., 1980, “Laminar separation, transition and turbulent reattachment near the leading edge of airfoils,” AIAA J., Vol. 18, No. 7, pp. 747-753.
3. Bellows, W. J., and Mayle, R. E., 1986, “Heat Transfer Downstream of a Leading Edge Separation Bubble,” ASME Journal of Turbomachinery, Vol. 108, pp. 131-136.
4. Chen, K. K., and Thyson, N. A., 1971, “Extension of Emmons’ spot theory to flows on blunt bodies,” AIAA J., Vol. 9, No. 5, pp. 821-825.
5. Cho, N.-H., Liu, X., Rodi, W., and Schönung, B., 1993, “Calculation of wake-induced unsteady flow in a turbine cascade,” ASME Journal of Turbomachinery, Vol. 115, pp. 675-686.
6. Coupland, J., 1995, “Transition modelling for turbomachinery flows,” ER-COFTAC Bulletin, No. 24, pp. 5-8, 1995.
7. Crimi, P., and Reeves, B. L., 1976, “Analysis of leading-edge separation bubbles on airfoils,” AIAA J., Vol. 14, No. 11, pp. 1548-1555.
8. Emmons, H. W., 1951, “The laminar-turbulent transition in a boundary layer—Part I,” J. of the Aeronautical Sciences, Vol. 18, pp. 490-498.
9. Gotthardt, H., 1983, “Theoretische und experimentelle Untersuchungen an ebenen Turbinengittern mit Pfeilung und V-Stellung,” Dissertation, Universität Braunschweig.
10. Haas, W., Rodi, W., Schönung, B., and Swainy, N. V. C., 1987, “Experimentelle Untersuchung von lokalen Ablöseblasen an Gasturbinenschaufeln,” Z Flug-wiss. Weltraumforschung, Vol. 11, pp. 261-270.
11. Hazarika, B. K., and Hirsch, C., 1996, “The effect of Reynolds number on the behaviour of a leading edge separation bubble,” ASME Paper No. 96-GT-410.
12. Karniadakis, G. E., Orszag, S. A., and Yakhot, V., 1990, “Large-eddy/RNG simulation of flow over a backward-facing step,” in: Engineering Turbulence Modelling and Experiments, W. Rodi and E. N. Ganic, eds., pp. 269-278, Elsevier, New York.
13. Kaiktsis, L., Karniadakis, E. M., and Orszag, S.A., 1991, “Onset of three-dimensionality, equilibria, and early transition in flow over a backward-facing step,” J. of Fluid Mech., Vol. 231, pp. 501-528.
14. Kwon, O. K., and Pletcher, R. H., 1979, “Prediction of incompressible separated boundary layers including viscous-inviscid interaction,” ASME Journal of Fluids Engineering, Vol. 101, pp. 466-472.
15. Majumdar, S., Rodi, W., and Zhu, J., 1992, “Three-dimensional finite-volume methods for incompressible flows with complex boundaries,” ASME Journal of Fluids Engineering, Vol. 114, pp. 496-503.
16. Malkiel, E., and Mayle, R. E., 1996, “Transition in a Separation Bubble,” ASME Journal of Turbomachinery, Vol. 118, pp. 752-759.
17. Mayle, R. E., 1991, “The role of laminar-turbulent transition in gas turbine engines,” ASME Journal of Turbomaci-iinery, Vol. 113, pp. 509-537.
18. Papanicolaou, E., 1996, “Computation of Separated-Flow Transition Using a Two-Layer Model of Turbulence,” Rep. No. 733, Institute for Hydromechanics, University of Karlsruhe, Germany.
19. Patankar, S. V., 1980, Numerical Heat Transfer and Fluid Flow, Hemisphere, Washington, D.C.
20. Rhie, C. M., and Chow, W. L., 1983, “Numerical study of the turbulent flow past an airfoil trailing edge separation,” AIAA J., Vol. 21, No. 11, pp. 1525-1532.
21. Roberts, W. B., 1980, “Calculation of laminar separation bubbles and their effect on airfoil performance,” AIAA J., Vol. 18, No. 1, pp. 25-825.
22. Rodi, W., and Schönung, B., 1987, “Interaktives-Inverses Grenzschichtverfahren zur Berechnung von lokalen Ablöseblasen an Turbinenschaufeln,” Z. Flug-wiss. Weltraumforschung, Vol. 11, pp. 271-280.
23. Rodi, W., 1991, “Experience with two-layer models combining the k-e model with a one-equation model near the wall,” AIAA Paper No. 91-0216, presented at the 29th Aerospace Sciences Meeting, Reno, Nevada.
24. Rodi, W., Mansour, N. N., and Michelassi, V., 1993, “One-Equation NearWall Turbulence Modelling With the Aid of Direct Simulation Data,” ASME Journal of Fluids Engineering, Vol. 115, pp. 196-205.
25. Savill, A. M., 1992, “A T3 Test Case Project Report—Predicting Transition Induced by Free-Stream Turbulence,” presented at the IAHR/ERCOFTAC Turbulence Modelling SIG Seminar, Delft, The Netherlands.
26. Savill, A. M., 1994, T3D Test Case Problem Specification (private communication).
27. Savill, A. M., 1995, “A Summary report on the COST ERCOFTAC Transition SIG project evaluating turbulence models for predicting transition,” ERCOFTAC Bulletin, No. 24, pp. 57-61.
28. Schlichting, H., 1979, Boundary Layer Theory, McGraw-Hill, New York.
29. Van Doormal, J. P., and Raithby, G. D., 1984, “Enhancements of the SIMPLE Method for Predicting Incompressible Fluid Flows,” Num. Heat Transfer, Vol. 7, pp. 147-163.
30. Walker, G. J., Subroto, P. H., and Platzer, M. F., 1988, “Transition modeling effects on viscous/inviscid interaction of low Reynolds number airfoil flows involving laminar separation bubbles,” ASME Paper No. 88-GT-32.
31. Walker, G. J., 1993, “The role of laminar-turbulent transition in gas turbine engines: a discussion,” ASME Journal of Turbomachinery, Vol. 115, pp. 207-217.
32. Zhu, J., 1991a, “FAST-2D: A computer program for numerical simulation of two-dimensional incompressible flows with complex boundaries,” Rep. No. 690, Institute for Hydromechanics, University of Karlsruhe, Germany.
33. Zhu, J., 1991b, “A low-diffusive and oscillation-free convection scheme,” Comm, in Applied Num. Methods, Vol. 7, pp. 225-232.