Analytical model of a particular type of positive displacement blower

Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering

Volumn 213, Issue 5, 1999, Pages 517-526

  Mimmi, G ^a   Pennacchi, P ^a  

^a UNIVERSITY OF PAVIA   (Italy)

Author keywords

Gears; Parametric design; Rotary compressors; Superchargers; Three dimensional analytical model

Indexed keywords

DESIGN; MATHEMATICAL MODELING; ROTARY COMPRESSOR;

EID: 0032850149     PISSN: 09544062     EISSN: None     Source Type: Journal    
DOI: 10.1243/0954406991522743     Document Type: Article

References (34)

1. Buckingham, E. Analytical Mechanics of Gears, 1963 (Dover, New York).
2. Litvin, F. L. Gear Geometry and Applied Theory, 1994 (Prentice-Hall, Englewood Cliffs, New Jersey).
3. Merritt, H. E. Gears, 1954 (Pitman, London).
4. Stone, R. C. The efficiency of roots compressors and compressors with fixed internal compression. Proc. Instn Mech. Engrs, Part A, Journal of Power and Energy, 1988, 202(A3), 199-205.
5. Kestin, J. and Owezarek, J. A. The expression of work in a roots blower. Proc. Instn Mech. Engrs, 1952, 152-3(1B), 91-94.
6. Glaister, E. Communication. Proc. Instn Mech. Engrs, 1952, 152-3(1B), 95.
7. Shu, P. C., Tang, Y. and Peng, X. Y. A substitute of roots blower-monotooth rotary compressor. In Proceedings of 1994 International Compressor Engineering Conference (Ed. W. Soedel), Purdue University, West Lafayette, Indiana, 1994, Vol. 1, pp. 317-322.
8. Singh, P. J. and Bowman, J. L. Effect of design parameters on oil-flooded screw compressor performance. In Proceedings of 1986 International Compressor Engineering Conference (Eds J. F. Hamilton and R. Cohen), Purdue University, West Lafayette, Indiana, 1986, Vol. 1, pp. 71-88.
9. Zenan, X. and Dagang, X. Study on actual profile surface and engaging clearance of screw compressor rotors. In Proceedings of 1986 International Compressor Engineering Conference (Eds J. F. Hamilton and R. Cohen), Purdue University, West Lafayette, Indiana, 1986, Vol. 1, pp. 305-311.
10. Edström, S. E. A modern way to good screw rotors. In Proceedings of 1992 International Compressor Engineering Conference (Ed. J. F. Hamilton), Purdue University, West Lafayette, Indiana, 1992, Vol. 2, pp. 412-430.
11. Bennewitz, C. Software support for screw rotor design, manufacture and quality control. In Proceedings of 1992 International Compressor Engineering Conference (Ed. J. F. Hamilton), Purdue University, West Lafayette, Indiana, 1992, Vol. 2, pp. 431-437.
12. Zhang, L. and Hamilton, J. F. Main geometric characteristics of the twin screw compressor. In Proceedings of 1992 International Compressor Engineering Conference (Ed. J. F. Hamilton), Purdue University, West Lafayette, Indiana, 1992, Vol. 2, pp. 449-456.
13. Zicheng, Z. Computer aided design of a twin-screw refrigerant compressor. In Proceedings of 1992 International Compressor Engineering Conference (Ed. J. F. Hamilton), Purdue University, West Lafayette, Indiana, 1992, Vol. 2, pp. 457-466.
14. Stosic, N. and Hanjalic, K. Development and optimization of screw engine rotor pairs on the basis of computer modelling. In Proceedings of 1994 International Compressor Engineering Conference (Ed. W. Soedel), Purdue University, West Lafayette, Indiana, 1994, Vol. 1, pp. 55-60.
15. Fleming, J. S., Tang, Y. and Anderson, H. Twin screw compressor performance and its relationship with rotor cutter blade shape and manufacturing cost. In Proceedings of 1994 International Compressor Engineering Conference (Ed. W. Soedel), Purdue University, West Lafayette, Indiana, 1994, Vol. 2, pp. 647-652.
16. Sjöholm, L. Different operational modes for refrigeration twin-screw compressors. In Proceedings of 1986 International Compressor Engineering Conference (Eds J. F. Hamilton and R. Cohen), Purdue University, West Lafayette, Indiana, 1986, Vol. 1, pp. 89-104.
17. Mori, H., Kasuya, K., Fujiwara, M., Matsubara, K., Suzuki, A. and Aoki, M. Single stage, oil-free screw compressor with a compression ratio of eight. In Proceedings of 1986 International Compressor Engineering Conference (Eds J. F. Hamilton and R. Cohen), Purdue University, West Lafayette, Indiana, 1986, Vol. 1, pp. 105-118.
18. Tang, Y. and Fleming J. S. Simulation of working process of an oil flooded helical screw compressor with liquid refrigerant injection. In Proceedings of 1992 International Compressor Engineering Conference (Ed. J. F. Hamilton), Purdue University, West Lafayette, Indiana, 1992, Vol. 1, pp. 213-220.
19. Tang, Y. and Fleming J. S. Obtaining the optimum geometrical parameters of a refrigeration helical screw compressor. In Proceedings of 1992 International Compressor Engineering Conference (Ed. J. F. Hamilton), Purdue University, West Lafayette, Indiana, 1992, Vol. 1, pp. 221-227.
20. Miyoshi, K. Analysis of screw compressor performance based on indicator diagrams. In Proceedings of 1992 International Compressor Engineering Conference (Ed. J. F. Hamilton), Purdue University, West Lafayette, Indiana, 1992, Vol. 1, pp. 259-268.
21. Kangping, C., Zhenwu, T. and Hengyi, C. The development and application of a water-injected twin screw compressor. In Proceedings of 1992 International Compressor Engineering Conference (Ed. J. F. Hamilton), Purdue University, West Lafayette, Indiana, 1992, Vol. 1, pp. 269-278.
22. Adams, G. P. and Soedel, W. A method for computing the compression loads in twin screw compressors. In Proceedings of 1994 International Compressor Engineering Conference (Ed. W. Soedel), Purdue University, West Lafayette, Indiana, 1994, Vol. 1, pp. 67-72.
23. Adams, G. P. and Soedel, W. Dynamic simulation of rotor contact forces in twin screw compressors. In Proceedings of 1994 International Compressor Engineering Conference (Ed. W. Soedel), Purdue University, West Lafayette, Indiana, 1994, Vol. 1, pp. 73-78.
24. Adams, G. P. and Soedel, W. Computation of compression loads in twin screw compressors. Trans. ASME, J. Mech. Des., 1995, 117, 512-519.
25. Huttebraucker, D., Puchas, C., Fick, W. and Joos, K. Entwicklungskonzept des Mercedes-Benz-Vierzylinder-Ottomotors mit mechanischer Aufladung für die C-Klasse. Motortechnische Z., December 1995, (56), 772-775.
26. Huttebraucker, D., Puchas, C., Fick, W. and Joos, K. Development of the Mercedes-Benz 4-cylinder gasoline engine with compressor. In Proceedings of VDI-Internationales Wiener Motorensymposium, 25-26 April 1996, pp. 69-95.
27. Schmitz, T., Holloh, K. D. and Jurgens, R. Potentiale einer mechanischen Zusatzaufladung für Nutzfahrzeugmotoren. Motortechnischc Z., May 1994, (55), 309-315.
28. Minimi, G. and Pennacchi, P. Computation of pressure loads in three screw pump rotors. Trans. ASME, J. Mech. Des., December 1998, 120(4), 581-588.
29. Sesini, O. Meccanica Applicata alle Macchine-Cinematica, Vol. 1, 1964 (Casa Editrice Ambrosiana, Milan).
30. Minimi, G. and Pennacchi, P. Flow rate regularity in rotary trochoidal-lobe pumps. In Machine Elements and Machine Dynamics (Ed. G. R. Pennock), 1994, DE-Vol. 71, pp. 295-302 (American Society of Mechanical Engineers, New York).
31. Mimmi, G. and Pennacchi, P. Design of three-screw positive displacement rotary pumps. In Contact Mechanics II-Computational Techniques (Eds M. H. Aliabadi and C. Alessandri), 1995, pp. 401-411 (Computational Mechanics Publications, Southampton and Boston).
32. Mimmi, G. and Pennacchi, P. Determination of tool profile for the milling of three screw pump rotor. Meccanica-Int. J. Ital. Ass. Theor. and Appl. Mechanics, 1997, 32(4), 363-376.
33. Henriot, J. Ingranaggi: Trattato Teorico e Pratico, 1987 (Tecniche Nuove, Milan).
34. Amerio, L. Analisi Matematica, Vol. 1, 1986 (UTET, Turin).