Fracture mechanisms and fracture mechanics at ultrasonic frequencies

Fatigue and Fracture of Engineering Materials and Structures

Volumn 22, Issue 7, 1999, Pages 567-579

  Stanzl Tschegg, S E ^a  

^a UNIVERSITY OF NATURAL RESOURCES AND LIFE SCIENCES   (Austria)

Author keywords

[No Author keywords available]

Indexed keywords

CRACK INITIATION; CRACK PROPAGATION; FIBER REINFORCED MATERIALS; FRACTURE MECHANICS; LAMINATED COMPOSITES; STRUCTURAL LOADS; TORSIONAL STRESS; ULTRASONIC TESTING;

FIBER BRIDGING; HIGH-CYCLE FATIGUE; TORSION FATIGUE; ULTRASONIC FATIGUE;

FATIGUE TESTING;

EID: 0032689207     PISSN: 8756758X     EISSN: None     Source Type: Journal    
DOI: 10.1046/j.1460-2695.1999.00180.x     Document Type: Article

References (38)

1. S. Stanzl, M. Czegley, H. R. Mayer and E. K. Tschegg (1989) Fatigue crack growth under combined mode I and mode II loading. In: Fracture Mechanics: Perspectives and Directions, ASTM STP 1020 (Edited by R. P. Wei and R. P. Gangloff), ASTM, Philadelphia, pp. 479-496.
2. H. Mayer, S. E. Tschegg, R. Rösch, Hj. Lipowsky and A. Stich (1998) Korrosionsermüdung verschiedener Aluminium-und Magnesiumlegierungen. In: Konstruktiver Korrosionsschutz, Tagungsband DVM, Berlin, 6-8 Mai 1998, pp. 219-236.
3. S. E. Stanzl-Tschegg, M. A. Papakyriacou, H. R. Mayer, J. Schijve and E. K. Tschegg (1993) High cycle fatigue crack growth properties of aramid reinforced aluminum laminates. In: Composite Materials: Fatigue and Fracture, ASTM STP 1156 (Edited by W. W. Stinchomb and N. E. Ashbough), ASTM, Philadelphia, pp. 637-652.
4. E. A. Neppiras (1959) Techniques and equipment for fatigue testing at very high frequencies. In: Proceedings ASTM 59, ASTM, Philadelphia, pp. 691-710.
5. S. Stanzl (1981) A new experimental method for measuring life time and crack growth of materials under multi-stage and random loadings. Ultrasonics 19, 269-272.
6. S. E. Stanzl, E. K. Tschegg and H. Mayer (1986) Lifetime measurements for random loading in the very high cycle fatigue range. Int. J. Fatigue 8, 195-200.
7. R. Mitsche, S. Stanzl and D. G. Burkert (1973) Hochfrequenzkinematographie in der Metallforschung. Wissenschaftlicher Film 14, 3-10.
8. E. K. Tschegg, H. R. Mayer, M. Czegley and S. E. Stanzl-Tschegg (1990) Influence of a constant mode III load on mode I thresholds. In: Fatigue Under Biaxial/Multiaxial Loading, Mech. Eng. Publishers, London, pp. 213-222.
9. o mit Ultraschall. Zeitschrift für Werkstofftechnik 11, 305-308.
10. S. E. Stanzl and E. Tschegg (1981) Influence of environment on fatigue crack growth in the threshold region. Acta Metall. 29, 21-32.
11. S. E. Stanzl-Tschegg, H. R. Mayer and E. K. Tschegg (1991) The influence of air humidity on near-threshold fatigue crack growth of 2024-T3 aluminium alloy. Mater. Sci. Engng A 147, 45-54.
12. R. Ebara and Y. Yamada (1987) Ultrasonic corrosion fatigue testing of 13 Cr stainless steel and Ti-6Al-4V alloys. In: Ultrasonic Technology (Edited by K. Toda), MYU Research, Tokyo, pp. 329-342.
13. E. K. Tschegg and S. E. Stanzl (1981) Fatigue crack propagation and threshold in b.c.c. and f.c.c. metals at 77 and 293 K. Acta Metall. 29, 33-40.
14. T. Wu, J. Ni and C. Bathias (1994) An automatic ultrasonic fatigue testing system for studying low crack growth at room and high temperatures. In: Automation in Fatigue and Fracture, ASTM STP 1231 (Edited by C. Amzallag), ASTM, Philadelphia, pp. 598-607.
15. A. Puskár and L. Várkoly (1986) Influence of temperature on fatigue crack growth behaviour of steels at ultrasonic frequency. Fatigue Fract. Engng Mater. Struct. 9, 143-150.
16. T. Wu and C. Bathias (1994) Application of fracture mechanics concepts in ultrasonic fatigue. Engng Fracture Mech. 47, 683-690.
17. H. R. Mayer, D. M. Tan and S. E. Stanzl-Tschegg (1993) FEM modelling of stress intensity factors during fatigue crack growth at ultrasonic frequencies. Engng Fracture Mech. 45, 487-495.
18. L. Buchinger, S. E. Stanzl and C. Laird (1984) Dislocation structures in copper single crystals fatigued at low amplitudes. Philosophical Magazine 50, 275-298.
19. L. Buchinger, S. E. Stanzl and C. Laird (1990) Dislocation structures produced by low-amplitude fatigue of copper single crystals at 77K. Phil. Mag. 1, 62 (6), 633-651.
20. D. Kuhlmann-Wilsdorf and C. Laird (1977-1979) Dislocation behavior in fatigue. Mater. Sci. Engng 37, 111-120; 39, 127-139; 46, 209.
21. D. Kuhlmann-Wilsdorf and C. Laird (1977-1979) Dislocation behavior in fatigue. Mater. Sci. Engng 37, 111-120; 39, 127-139; 46, 209.
22. D. Kuhlmann-Wilsdorf and C. Laird (1977-1979) Dislocation behavior in fatigue. Mater. Sci. Engng 37, 111-120; 39, 127-139; 46, 209.
23. B. D. Van, A. Hunsche, P. Neumann and C. Laird (1986) Loop patch behaviour as affected by incremental loading and cyclic frequency in fatigue. Mater. Sci. Engng 79, 9-14.
24. H. Fuhlrott and P. Neumann (1976) On the mechanisms of stage I and stage II fatigue crack growth. In: Proc. of the 4th Int. Conference on the Strength of Metals and Alloys, Nancy, pp. 827-831.
25. C. Laird, S. E. Stanzl, R. de la Veaux and L. Buchinger (1986) The cyclic stress-strain response and dislocation structures of Cu-16% Al alloy, Part II, polycrystalline behavior. Mater. Sci. Engng 80, 143-154.
26. K. J. Miller (1998) Contribution to discussion at the Euromech 382 Symposium Fatigue Life in the Gigacycle Regime, 30 June-3 July 1998, Paris.
27. S. E. Stanzl-Tschegg, H. R. Mayer, A. Beste and S. Kroll (1995) Fatigue and fatigue crack propagation in AlSi7Mg cast alloys under in-service loading conditions. Int. J. Fatigue 17, 149-155.
28. W. Schütz (1979) The prediction of fatigue life in the crack initiation and propagation stages - a state of the art survey. Engng Fracture Mech. 11, 405-421.
29. J. Schijve (1990) Crack stoppers and arall laminates. Engng Fracture Mech. 37, 405-421.
30. M. Papakyriacou, J. Schijve and S. E. Stanzl-Tschegg (1997) Fatigue crack growth of fiber-metal laminates with different blunt notches. Fatigue Fract. Engng Mater. Struct. 20, 1573-1584.
31. M. Papakyriacou, S. E. Stanzl-Tschegg and J. Schijve (1995) Fatigue behaviour of notched components of fiber-metal laminates (glare). In: Fatigue Design 1995, Vol. I (Edited by G. Marquis and J. Solin), VTT Man. Techn., Techn. Res. Centre of Finland, Espoo, pp. 309-320.
32. N. Ranganathan, B. Bouchet and J. Petit (1987) Fractographic aspects of the effect of the environment on the fatigue propagation mechanism in a high-strength aluminum alloy. In: Fractography of Modern Engineering Materials: Composites and Metals, ASTM STP 948, pp. 424-446.
33. S. E. Stanzl-Tschegg, H. R. Mayer and E. K. Tschegg (1993) High-frequency method for torsion fatigue testing. Ultrasonics 31, 275-280.
34. H. R. Mayer and S. E. Stanzl-Tschegg (1996) High frequency torsional and axial fatigue loading of Al 2024-T351. In: Proc. the Sixth Int. Fatigue Congress Vol. I, (Edited by G. Lütjering and H. Nowack), Elsevier Science, Berlin Germany, pp. 691-696.
35. E. K. Tschegg (1985) Fatigue crack growth in high and low strength steel under torsional loading. Theor. Appl. Fract. Mech. 3, 157-178.
36. H. R. Mayer, E. K. Tschegg and S. E. Stanzl-Tschegg (1996) High cyclic fatigue measurements on ceramic materials under combined loading (cyclic torsion + static compression). In: Multiaxial Fatigue and Design, ESIS 21 (Edited by A. Pineaux, G. Cilletaud and T. C. Lindley), Mech. Eng. Publications, London, pp. 411-421.
37. S. E. Stanzl-Tschegg (1996) Ultrasonic fatigue. In: Proc. the Sixth Int. Fatigue Congress Vol. III, (Edited by G. Lütjering and H. Nowack), Elsevier Science, Berlin Germany, pp. 1187-1198.
38. C. Laird and P. Charsley (1982) Deformation and fatigue fracture. In: Ultrasonic Fatigue (Edited by J. M. Wells, O. Buck, E. D. Roth and J. K. Tien), The Met. Soc. of AIME, New York, pp. 187-206.