Survey of rheological properties of polymer melts in capillary rheometers

Progress in Rubber and Plastics Technology

Volumn 15, Issue 1, 1999, Pages 47-68

  Sombatsompop, N ^a  

^a KING MONGKUT'S UNIVERSITY OF TECHNOLOGY THONBURI   (Thailand)

Author keywords

[No Author keywords available]

Indexed keywords

ADDITIVES; COMPOSITION EFFECTS; MOLTEN MATERIALS; PRESSURE EFFECTS; RHEOLOGY; RHEOMETERS; SHEAR STRESS; STRESS ANALYSIS; THERMAL EFFECTS; VISCOSITY OF LIQUIDS;

CAPILLARY RHEOMETER; POLYMER MELTS;

POLYMER BLENDS;

EID: 0032685738     PISSN: 02667320     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (79)

1. Rauwendaal C., Polymer Extrusion, Hanser Publishers, Munich, Vienna, New York, (1990)
2. Han C.D., Rheology in Polymer Processing, Academic Press, New York, (1976)
3. Lee W.K. and George H.H., Flow Visualization of Fibre Suspensions, Polym. Eng. Sci. 18(2), (1978), 146-156
4. Ogorkiewicz R.M., Thermoplastics: Effects of Processing, Illiffe Books Ltd., London, (1969)
5. Brydson J.A., Flow Properties of Polymer Melts, George Godwin Ltd., London, (1981)
6. Bagley E.B. and Birks A.M., Flow of Polyethylene into a Capillary, J. Appl. Phys., 31, (1960), 556
7. Cogswell F.N., Polymer Melt Rheology., George Godwin Ltd., London, (1981)
8. Hatzikiriakos S.G., The Onset of Wall Slip and Sharkskin Melt Fracture in Capillary Flow., Poly. Eng. Sci., 34 (19), (1994) 1441-1449,
9. Schreiber H.P. and Rudin A., Some Elastic Effects in the Extrusion of Polyethylene, J. Appl. Polym. Sci. 3 (7), (1960), 122-125
10. Sombatsompop N. and Wood A.K., Flow Analysis of Natural Rubber in a Capillary Rheometer: Part 2. Flow Patterns and Die Entrance Velocity Profiles in the Die Polym. Eng. Sci. 37 (2), (1997), 281-290
11. Yue M. and Wood A.K., Temperature Profiles and Shear Heating Effects in Polymer Processing., SPE ANTEC Tech. Papers, 40 (1), (1994), 667-670
12. Sombatsompop N., Wood A.K. and Yue M., Techniques for the Simultaneous Determination of Temperature and Velocity Profiles in Flowing Polymer Melts, ASME Fluid Measurements and Instrumentation, FED-Vol. 239 (4), (1996), 371-377
13. Sombatsompop N., Liolios K., Mohd-Jamel M.H. and Wood A.K., Techniques for Pressure-Density-Temperature Measurements in Polymer Melts, Polym. Polym. Compos. 5(4), (1997), 259-264
14. Horsfall F. and Sambrook R.W., The Davenport Extrusion Rheometer, RAPRA Bulletin, August, (1972), 217-219
15. Dealy J.M., Process Rheometers for Molten Plastics: The State of the Art and Challenges for the Future, SPE ANTEC Tech. Papers, 37, (1991), 2296-2302
16. Dealy J.M. and Broadhead T.O., Process Rheometers for Molten Plastics: A Survey of Existing Technology, Polym. Eng. Sci., 33(23), (1993), 1513-1523
17. Wood A.K., Read A.G.G. and Lovegrove J.G.A., The Effects of Rheometer Design in the Measurement of the Flow Properties of Polymer Melts, Plast. Rubb. Process. Applic., 12(1), (1989), 15-20
18. Sombatsompop N. and Wood A.K., Error Sources in Rheological Measurements of Carbon Black Filled Rubber Compounds, J. Sci. Soc. Thailand, (1999), (in press)
19. Liang J.Z., Estimation of Vortical Region Length of Rubber Compound During Entry Flow, Plast. Rubb. Compos. Proc. Appl., 25 (10), (1996), 495-498
20. Sombatsompop N., Tan M.C. and Wood A.K., Flow Analysis of Natural Rubber in a Capillary Rheometer: Part 1. Rheological Behaviour and Flow Visualisation in the Barrel, Polym. Eng. Sci. 37 (2), (1997), 270-280
21. Liang J.Z., Huang Y.O. and Tang G.J., Effects of Die Entry Angles on Pressure Drop in Extrusion of Rubber Compound, China Rubber Industry, 9, (1991), 546-550
22. Liang J.Z., Research on the Flow Properties of Rubber Compound during Extrusion, Polymer Materials, 1, (1991), 6-10
23. Liang J.Z., Huang Y.O., Tang G.J. and Ness J.N., A Study of the Flow Behaviour of Rubber Compound Melt Through Extrusion Dies with Different Entry Angles, Plast. Rubb. Compos. Proc. Appl., 18(5), (1992), 311-315,
24. Sombatsompop N. and Wood A.K. and Godfrey I.S., Comparison of Flow Patterns Observed in the Barrels of a Capillary Rheometer and an Injection Moulding Machine, SPE ANTEC Tech. Papers 43 (1), (1997), 388-392
25. Groves D.J., Martyn M.T. and Coates P.D., Off Line and In Process Converging Flow Measurements for Polyethylene Melts, Plast. Rubb. Compos. Proc. Appl., 26 (1), (1997), 13,
26. Leblanc J.L., Rubber-Filler Structure and Rheology in Actual Processing Conditions are Essential Elements in the Concept of Processability, Proc. Rub. Conf.'92, London, (1992), 153-158
27. Leblanc J.L., Discrepancies in Testing Rubber Compounds with Different Commercial capillary Rheometers, Plast. Rubb. Compos. Proc. Appl., 21 (2), (1994), 81,
28. Todd D.B., Gogos C.G., Esseghir M., Yu D.W. and Widagdo S., Monitoring Process Viscosities with a New On-line Rheometer, Plast. Eng., March, (1997), 107-109
29. th April 1997
30. Morrow V. and Reilly J.F., Improving Correlation between On-line and Lab Rheology - Plast. Eng., September, 27-29, (1995)
31. Kelly A.L., Coates P.D., Dobbie T.W. and Fleming D.J., On Line Rheometer: Shear and Extensional Flows, Plast. Rubb. Compos. Proc. Appl., 25 (7), (1996), 313-318
32. Popovic R.S., Plavsic M., Popovic R.G. and Krusevac N.I., Correlation between Viscosity Measured by Capillary Rheometer and Mooney Viscometer on Testing Rubbers and Rubber Mixes, Kautschuk + Gummi Kunststoffe, 44 (7), (1991), 702-704
33. Progelhof R.C. and Throne J.L., Polymer Engineering Principles: Properties, Processes, Tests for Design, Hanser, New York, (1993)
34. Barnes H., Hutton J., Walters K., An Introduction to Rheology - Elsevier Amsterdam, (1989)
35. Motyka A.L., An Introduction to Rheology with an Emphasis on Application to Dispersion, J. Chem Edu., 73(4), (1996), 374-380
36. Cogswell F.N., The Influence of Pressure on the Viscosity of Polymer Melts, Plast. Polym., February, (1973), 39-43
37. Morton-Jones D.H., Polymer Processing, Chapman and Hall, London, (1993)
38. Wood A.K., Yue M., Sims G.L.A., El-Rafey E. and Healey G., Processing Stability of Polyethylene, J. Appl. Polym. Sci.: Appl. Polym. Symp. 55, (1994), 117-127
39. Rudin A. and Schreiber H.P., Time dependence of Viscosity in Capillary Extrusion of Polyethylene, J. Polym. Sci. 44, (1960), 261-264,
40. Price R.E., Time Effects in Polymer Melt Viscometers, J. Appl. Polym. Sci. 7, (1963), 43-45
41. Turner D.M. and Bickley A.C., The Effect of Shear History on the Rheology of Unvulcanised Rubber, Plast. Rubb. Proc. Applic. 1(4), (1981), 357-362
42. Sombatsompop N. and Wood A.K., Measurement of Thermal Conductivity of Polymers Using an Improved Lee's Disc Apparatus, Polym. Test. 16(3), (1997), 203-223
43. Tanner R.I., Engineering Rheology, Revised Edition, Oxford Science, Oxford, (1988)
44. Crowson R.J., Scott A.J. and Saunders D.W., Rheological of Short Glass Fibre-Reinforced Thermoplastics and Its Application to Injection Moulding. III: Use of a High Shear Rate Capillary Rheometer in the Injection Moulding Shear Rate Range, Polym. Eng. Sci., 21(12), (1981), 748-754
45. Kamal M.R. and Nyun H., The Effect of Pressure on the Shear Viscosity of Polymer Melts, Rheol. Acta, 12, (1973), 263-268
46. Kamal M.R. and Nyun H., The Effect of Pressure on the Shear Viscosity of Polymer Melts, Trans. Soc. Rheol., 17(2), (1973), 271-285,
47. Nielsen L.E., Mechanical Properties of Polymers and Composites, Marcel Dekker Inc. New York, (1972)
48. Kadijk S.E. and Van Den Brule B.H.A.A., On the Pressure Dependence of the Viscosity of Molten Polymers, Polym. Eng. Sci., 34(20), (1994), 1535-1546
49. Yue M. and Wood A.K., Pressure Effect on Temperature Measurement of Polymer Melt, Polym. Bull., 33, (1994), 127-132
50. Yu G., Zhang M.Q. and Zeng H.M., Carbon Black Filled Polyolefin as a PTC Material: Melt Rheological Behaviour, Adv. Comp. Let. 6(6), (1997), 161-166
51. Wang P.J. and Wang K.K., Adaptive On-line Process Control of Injection Moulding using PVT Model, SPE ANTEC Tech. Papers, 37, (1991), 2336-2341
52. Chang R.Y., Chen C.H. and Su K.S., Modifying the Tait Equation with Cooling Rate Effects to Predict the Pressure-Volume-Temperature Behaviour of Amorphous Polymers: Modelling and Experiments, Polym. Eng. Sci., 36(13), (1996), 1789-1795
53. 2, Rev. Sci. Instrum. 48(8), (1976), 948-952
54. 2), J. Appl. Polym. Sci., 22, (1978), 633-641
55. th April (1997)
56. Ju Y-H. and Huang F-C., The Effects of Temperature and Pressure on Viscous Flow of Power Law Fluid in a Capillary Tube, J. China Inst. Chem. Eng., 19(1), (1988), 9-15
57. Crowson R.J., Folkes M.J. and Bright P.F., Rheological of Short Glass Fibre-Reinforced Thermoplastics and Its Application to Injection Moulding. I: Fibre Motion and Viscosity Measurement, Polym. Eng. Sci., 20(14), (1980), 925-933
58. Crowson R.J. and Folkes M.J., Rheological of Short Glass Fibre-Reinforced Thermoplastics and Its Application to Injection Moulding. II: The Effect of Material Parameters, Polym. Eng. Sci., 20(14). (1980), 934-940
59. st December (1989)
60. Guriya K.Ch., Bhattachariya A.K. and Tripathy D.K., Rheological Properties of Ethylene Propylene Diene Rubber (EPDM) Compound: Effect of Blowing Agent, Curing Agent and Carbon Black Filler, Polymer, 39(1), (1998), 109-115
61. Westover R.F., Effect of Hydrostatic Pressure on Polyethylene Melt Rheology, SPE Trans. January, 14-20, (1961)
62. Ito K., Tsutsui M., Kasajima M. and Ojima T., Capillary Flow of Polymer Melts Under Hydrostatic Pressure, Appl. Polym. Symp., 20, (1973), 109-121
63. Salovey R. and Lakdawala K., Rheology of Polymers Containing Carbon Black - SPE ANTEC Tech. Papers, 33(1), (1987), 934-937
64. Deiber J.A. and Fernandez D.R., Rheological Changes in the Processing of Rubber-Carbon Black Compounds, J. Elast. Plast. 23 (3), (1991), 239
65. Singh M. and Freakley P.K., Effect of Carbon Black on the Stress Growth of Elastomer Compounds at Low Shear Rates, Proc. Rub. Conf.'92, London, (1992), 158-163
66. Suhara F., Kutty S.K.N., Nando G.B. and Bhattacharya A.K., Rheological Properties of Short Polyester Fibre-Polyurethane Elastomer Composite with Different Interfacial Bonding Agents, Polym.-Plast. Technol. Eng. 37(1), (1998), 57-70
67. Ghosh K. and Maiti S.N., Melt Rheological Properties of Silver-Powder-Filled Polypropylene Composites, Polym.-Plast. Technol. Eng., 36(5), (1997), 703-722
68. Yu G., Zhang M.Q. and Zeng H.M., Carbon-Black-Filled Polyolefins as a Positive Temperature Coefficient Material: Effect of Composition, Processing and Filler Treatment, J. Appl. Polym. Sci., 70, (1998), 559-566,
69. Sombatsompop N., Rheological Behaviour of Unvulcanised Natural Rubber Compounded with Cryogenically Pulverised Polyurethane Foam Particles, J. Elast. Plast., (accepted).
70. Sombatsompop N. and Sims G.L.A., Pulverised Flexible Polyurethane Foam Particles as a Filler in Natural Rubber Vulcanisates, Cell. Polym. 15 (2), (1996), 90-104
71. Sombatsompop N. and Sims G.L.A., Pulverised Flexible Polyurethane Foam Particles and Carbon Black as Fillers in Natural Rubber Compounds, Polym. Recycl. 2 (3), (1996), 221-229
72. Sombatsompop N. and Sims G.L.A., Effect of Moisture Content and Particle Size of Flexible Polyurethane Foam Particles and Carbon Black Filled Natural Rubber Compounds, SPE ANTEC Tech. Papers 43 (3), (1997), 3114-3118
73. Sombatsompop N., Dynamic Mechanical Properties of Ground Flexible Polyurethane Foam Particles and Carbon Black Filled Rubber Vulcanisates, Polym.-Plast. Technol. Eng. 37 (1), (1998), 1-18,
74. Sombatsompop N., Swelling and Viscoelastic Properties of NR Vulcanisates Filled with Cryogenically Pulverised Polyurethane Foam Particles, J. Elast. Plast., 31 (1), (1999), 37-55
75. Deanin R.D., Advances in Polymer Blends and Alloys Technology, London, (1991)
76. Abraham D., George K.E. and Francis D.J., Effect of Chemical Modification on the Flow Behaviour of LDPE and Its Blends with Linear LDPE, Polymer, 39(1), (1998), 117-121
77. Kresge E.N., Elastomeric Blends, J. Appl. Polym. Sci.: Appl. Polym. Symp., 39, (1984), 37-57
78. Mathew I., George K.E. and Francis D.J., Viscous and Elastic Behaviour of SEBS Triblock Copolymer. Die Ange. Makromolecu. Chemie, 217, (1994), 51,
79. Munstedt H., Rheology of Rubber-Modified Polymer Melts, Polym. Eng. Sci., 21(5), (1981), 259-270,