Towards an integration of process planning and production planning and control for flexible manufacturing systems

International Journal of Flexible Manufacturing Systems

Volumn 11, Issue 1, 1999, Pages 5-17

  Gaalman, Gerard J C ^a   Slomp, Jannes ^a   Suresh, Nallan C ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

NUMERICAL CONTROL SYSTEMS; PROCESS CONTROL; PRODUCTION CONTROL;

PRODUCTION PLANNING;

FLEXIBLE MANUFACTURING SYSTEMS;

EID: 0032677102     PISSN: 09206299     EISSN: None     Source Type: Journal    
DOI: 10.1023/A:1008056505618     Document Type: Article

References (44)

1. Abdin, M.F., "Solutions of Scheduling Problems of Job Shop Type FMS with Alternative Machine Tools," Computers and Industrial Engineering, Vol. 11, pp. 241-245 (1986).
2. Benjaafar, S.B., Talavage, J., and Ramakrishnan, R., "The Effect of Routing and Machine Flexibility on the Performance of Manufacturing Systems," International Journal of Computer Integrated Manufacturing, Vol. 8, pp. 265-276 (1995).
3. Bobrowski, P.M. and Mabert, V.A., "Alternate Routing Strategies in Batch Manufacturing: An Evaluation," Decision Science, Vol. 19, pp. 713-733 (1988).
4. Brill, P.H. and Mandelbaum, M., "Measurement of Adaptivity and Flexibility in Production Systems," European Journal of Operational Research, Vol. 49, pp. 325-332 (1990).
5. Browne, J., Dubois, D., Rathmill, K., Sethi, S.P., and Stecke, K.E., "Classification of Flexible Manufacturing Systems," The FMS Magazine, Vol. 4, pp. 114-117 (1984).
6. Buzacott, J.A., "The Fundamental Principles of Flexibility in Manufacturing Systems," Proceedings of the First International Congress on Flexible Manufacturing Systems, Bedford, UK, pp. 13-22 (1982).
7. Caprihan, R. and Wadhwa, S., "Impact of Routing Flexibility on the Performance of an FMS: A Simulation Study," International Journal of Flexible Manufacturing Systems, Vol. 9, pp. 273-298 (1997).
8. Carlsson, B., "Management of Flexible Manufacturing: An International Comparison," OMEGA, Vol. 20, No. 1, pp. 11-22 (1992).
9. Carter, M.F., "Designing Flexibility into Automated Manufacturing Systems," in Proceedings of the Second ORSA/TIMS Conference on Flexible Manufacturing Systems: Operations Research Models and Applications, K.E. Stecke and R. Suri (Eds.), Elsevier Science Publishers B.V., Amsterdam, the Netherlands, pp. 107-118 (August 1986).
10. Chang, Y.-L., Sullivan, R.S., and Wilson, J., "Using Slam to Design the Material Handling System of a Flexible Manufacturing System," International Journal of Production Research, Vol. 24, pp. 15-26 (1986).
11. Chen, I.J. and Chung, C.-H., "Effects of Loading and Routing Decisions on Performance of Flexible Manufacturing Systems," International Journal of Production Research, Vol. 29, pp. 2209-2225 (1991).
12. Chryssolouris, G., Chan, S., and Cobb, W., "Decision Making on the Shop Floor: An Integrated Approach to Process Planning and Scheduling," Robotics and Computer Integrated Manufacturing, Vol. 1, pp. 315-319 (1984).
13. Chryssolouris, G., Pierce, J., and Dicke, K., "Madena: An Approach for Allocating Manufacturing Resources to Production Tasks," Journal of Manufacturing Systems, Vol. 10, pp. 368-382 (1991).
14. Chung, C.H. and Chen, I.J., "A Systematic Assessment of the Value of Flexibility from FMS," in Proceedings of the Second ORSA/TIMS Conference of Flexible Manufacturing Systems: Operations Research Models and Applications, K.E. Stecke and R. Suri (Eds.), Elsevier Science Publishers B.V., Amsterdam, the Netherlands, pp. 27-34 (August 1989).
15. Detand, J., Kruth, J.P., Kempenears, J., Pinte, J., and Kreutzfeldt, J., "The Generation of Non-Linear Process Plans," Proceedings of the 22nd CIRP International Sem. on Manufacturing Systems, University of Twente, the Netherlands, pp. 61-68 (1991).
16. Dixon, J.R., "Measuring Manufacturing Flexibility: An Empirical Investigation," European Journal of Operational Research, Vol. 60, pp. 131-143 (1992).
17. Elmaraghy, W.H., "Integrating Assembly Planning and Scheduling - CAPP Related Issues," Annals of the CIRP, Vol. 41, No. 1 (1992).
18. Esprit project 6805, public domain report, 1995.
19. Gupta, Y.P. and Somers, T.M., "The Measurement of Manufacturing Flexibility," European Journal of Operational Research, Vol. 60, pp. 166-182 (1992).
20. Halevi, G. and Weill, R., "Development of Flexible Optimum Process Planning Procedures," Annals of the CIRP, Vol. 29, pp. 313-317 (1980).
21. Hutchinson, G.K. and Pflughoeft, K.A., "Flexible Process Plans: Their Value in Flexible Automation Systems," International Journal of Production Research, Vol. 32, pp. 707-719 (1994).
22. Huang, S.H., Zhang, H.-C., and Smith, M.L., "A Progressive Approach for the Integration of Process Planning and Scheduling," IIE Transactions, Vol. 27, pp. 456-464 (1995).
23. Iwata, K. and Fukawa, Y., "A New Proposal of Dynamic Process Planning in Machine Shop," Proceedings of the International Workshop on CAPP, Hannover University, Germany, pp. 21-22 (1989).
24. Khoshnevis, B. and Chen, Q., "Integration of Process Planning and Scheduling Function," Journal of Intelligent Manufacturing, Vol. 1, pp. 165-176 (1990).
25. Larsen, N.B. and Alting, L., "Simultaneous Engineering Within Process and Production Planning," Pacific Conference on Manufacturing, Australia, pp. 1024-1031 (1990).
26. Larsen, N.B. and Alting, L., "Dynamic Planning Enriches Concurrent Process and Production Planning," International Journal of Production Research, Vol. 30, pp. 1861-1876 (1992).
27. Lenderink, A. and Kals, H.J.J., "The Integration of Process Planning and Machine Loading in Small Batch Part Manufacturing," Robotics and Computer-Integrated Manufacturing, Vol. 10, pp. 89-98 (1993).
28. Maffei, M.J. and Meredith, J., "Infrastructure and Flexible Manufacturing Technology: Theory Development," Journal of Operations Management, Vol. 13, No. 4, pp. 273-298 (1995).
29. Mandelbaum, M., "Flexibility in Decision Making: An Exploration and Unification," Ph.D. Thesis, Department of Industrial Engineering, University of Toronto, Canada (1978).
30. Sethi, A.K. and Sethi, S.P. "Flexibility in Manufacturing: A Survey," International Journal of Flexible Manufacturing Systems, Vol. 2, No. 4, pp. 289-328 (1990).
31. Slack, N., "Flexibility as a Management Objective," International Journal of Operations and Production Management, Vol. 3, No. 3, pp. 4-13 (1983).
32. Slack, N., "The Flexibility of Manufacturing Systems," International Journal of Operations and Production Management, Vol. 7, No. 4, pp. 35-45 (1987).
33. Slomp, J., "The Design and Operation of Flexible Manufacturing Shops," Ch. 7 in The Planning and Scheduling of Production Systems, Methodologies and Applications, A. Artiba and S.E. Elmaghraby (Eds.), Chapman & Hall, London, pp. 199-227 (1997).
34. Solberg, J.J., "Capacity Planning with a Stochastic Workflow Model," AIIE Transactions, Vol. 13, No. 2 (1981).
35. Stecke, K.E. and Parker, R.P., "Cells and Flexible Automation: A History and Synergistic Application," in Group Technology and Cellular Manufacturing: State-of-the-Art Synthesis of Research and Practice, N.C. Suresh and J.M. Kay (Eds.), Kluwer Academic Publishers, Boston/Dordrecht/London (1998).
36. Toenshoff, H.K., Beckendorff, U., and Andres, N., "Flexplan - A Concept for Intelligent Process Planning and Scheduling," Proceedings of the International Workshop on CAPP, Hannover University, Germany, pp. 87-106 (1989).
37. Upton, D.M., "The Management of Manufacturing Flexibility," California Management Review, Vol. 36, No. 2, pp. 72-89 (1994).
38. Upton, D.M., "Flexibility as Process Mobility: The Management of Plant Capabilities for Quick Response Manufacturing," Journal of Operations Management, Vol. 12, pp. 205-222 (1995).
39. Upton, D.M., "Process Range in Manufacturing: An Empirical Study of Flexibility," Management Science, Vol. 43, No. 8 (1997).
40. Usher, J.M. and Fernandes, K.J., "Dynamic Process Planning: The Static Phase," Journal of Materials Processing Technology, Vol. 61, pp. 53-58 (1996).
41. Van Houten, F.J.A.M., van het Erve, A.H., and Kals, H.J.J., "PART: A Feature-Based Computer Aided Process Planning System," Manufacturing Systems, Vol. 19, pp. 25-39 (1990).
42. Warnecke, H.J. and Kuehnle, H., "Integration of CAPP and PPC - The PPC Part," Annals of the CIRP, Vol. 41, No. 1, pp. 15-18 (1992).
43. Wilhelm, W.F. and Shin, H.M., "Effectiveness of Alternate Operations in a Flexible Manufacturing System," International Journal of Production Research, Vol. 23, pp. 65-79 (1985).
44. Zhang, H.C., "IPPM: A Prototype to Integrate Process Planning and Job Shop Scheduling Functions," Annals of the CIRP, Vol. 42, No. 1, pp. 513-518 (1993).