Progress on superplasticity and superplastic forming in Taiwan during 1987-1997

Materials Chemistry and Physics

Volumn 57, Issue 3, 1999, Pages 195-206

  Huang, J C ^a   Chuang, T H ^b  

^a NATIONAL SUN YAT SEN UNIVERSITY   (Taiwan)

^b NATIONAL TAIWAN UNIVERSITY   (Taiwan)

Author keywords

Diffusion bonding; Superplastic forming; Superplasticity

Indexed keywords

ALUMINUM ALLOYS; BONDING; FORGING; METAL EXTRUSION; METALLIC MATRIX COMPOSITES; ROLLING; SOLIDIFICATION; STRAIN RATE; THERMOMECHANICAL TREATMENT;

DIFFUSION BONDING;

SUPERPLASTICITY;

EID: 0032674984     PISSN: 02540584     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0254-0584(98)00224-7     Document Type: Review

References (66)

1. H.P. Pu, S.H. Yen, J.C. Huang, P.W. Kao, Evaluation on superplasticity in Al-Li and Al-Zn-Mg base alloys, Proc. Int. Conf. on Superplasticity in Advanced Materials (ICSAM-91), Osaka, Japan, 1991, p. 429.
2. T.R. Chen, J.C. Huang, The forming behavior and post-form properties of superplastic 8090 Al-Li thin sheets, Chinese J. Mater. Sci. 25 (1993) 34.
3. H.P. Pu, J.C. Huang, Low-temperature superplasticity in 8090 Al-Li alloys, Scripta Mater. 28 (1993) 1125.
4. H.P. Pu, J.C. Huang, G.R. Su, Low-temperature superplasticity in 8090 Al-Li base alloys, ROC patent No. 062260, 1993.
5. T.R. Chen, J.C. Huang, G.M. Liauo, Y.M. Hwang, Lubrication effect in superplastic forming of Al-Li thin sheets, Scripta Metall. Mater. 31 (1994) 309.
6. J.C. Huang, Y.D. Shen, N.J. Ho, Characterization of the electron beam welding of superplastic 8090 Al-Li alloys, Mater. Sci. Technol. 10 (1994) 647.
7. H.P. Pu, F.C. Liu, J.C. Huang, Characterization and analysis low-temperature superplasticity in 8090 Al-Li alloys, Metall. Mater. Trans. 26A (1995) 1153.
8. H.P. Pu, J.C. Huang, Processing routes for intertransformation between low-temperature and high-temperature superplasticity in 8090 Al-Li alloys, Scripta Metall. Mater. 33 (1995) 383.
9. H.P. Pu, J.C. Huang, H.C. Shih, S.Y. Yen, Thermomechanical treatments for making superplastic 7075 and 7475 Al sheets, ROC patent No. 07043, 1995.
10. H.P. Pu, J.C. Huang, H.C. Shih, Processing routes for intertransformation between low-temperature and high-temperature superplasticity in 8090 Al-Li alloys, ROC patent No. 073148, 1995.
11. Y.M. Hwang, J.M. Liew, T.R. Chen, J.C. Huang, Analysis of superplastic blow-forming in a circular close-die, J. Mater. Processing Technol. 57 (1996) 360.
12. 3Al intermetallic compound, Chinese J. Mater. Sci. 28 (1996) 28.
13. T.R. Chen, G.J. Peng, J.C. Huang, Quench sensitivity and its effects on mechanical properties of the 8090 Al-Li superplastic thin sheets, Mater. Sci. Forum, 217-222 (1996) 1073.
14. T.R. Chen, J.C. Huang, Y.M. Hwang, Fundamental characterization of hemisphere free bulging using superplastic 8090 Al-Li sheets, Mater. Sci. Technol. 12 (1996) 49.
15. T.R. Chen, G.J. Peng, J.C. Huang, Low-quench sensitivity in superplastic 8090 Al-Li thin sheets, Metall. Mater. Trans. 27A (1996) 2923.
16. M.F. Lee, J.C. Huang, N.J. Ho, Microstructure and mechanical characterisation of laser-beam welding of a 8090 Al-Li thin sheet, J. Mater. Sci. 31 (1996) 1455.
17. J.C. Huang, S.C. Chen, M.F. Lee, Y.D. Shen, Joining efficiency evaluation of superplastic 8090 Al-Li thin sheets using electron or laser beam welding, Mater. Sci. Forum, 217-222 (1996) 1697.
18. 3Ti alloys, Mater. Sci. Forum, 217-222 (1996) 1891.
19. Y.M. Hwang, J.S. Yang, T.R. Chen, J.C. Huang, Analysis of superplastic sheet metal forming in a circular close-die considering nonuniform thinning, J. Mater. Processing Technol. 65 (1997) 215.
20. S.C. Chen, J.C. Huang, The lap-shear and t-peel strength of overlap joints of superplastic 8090 Al-Li sheets bonded by electron-beam and laser-beam welding, Mater. Sci. Tech. 13 (1997) 143.
21. B.Y. Lou, J.C. Huang, H.P. Pu, Processing development and property characterization for aluminum alloys or composites exhibiting low-temperature or high-rate superplasticity, Proc. Thermec '97, Wollongong, Australia, 1997, p. 1853.
22. L.W. Yang, P.W. Kao, High-temperature tensile behavior MA Al-Ti alloy at high strain rate, Proc. Thermec '97, Wollongong, Australia, 1997, p. 1457.
23. 3Al base alloys, Acta Mater. 46 (1998) 465.
24. Y.M. Hwang, J.S. Yang, T.R. Chen, J.C. Huang, E.U. Wu, Analysis of superplastic blow-forming in a conical closed die, Int. J. Mech. Sci. 40 (1998) 867.
25. T.R. Chen, J.C. Huang, Grain boundary sliding seen in multiaxial forming and uniaxial tensile tests, Metall. Mater. Trans., 29A 1998, in press.
26. T.H. Chuang, Combination processing method of superplastic forming and barzing, German patent No. DE4200047C2, ROC patent No. 54545, 1992.
27. T.H. Chuang, Processing method for Ti hollow floating ball, ROC patent No. 63830, 1993.
28. J.S. Shyu, T.H. Chuang, Studies on the superplastic forming of Superdux 64 stainless steel, J. Chinese Mater. Sci. 26 (1994) 289.
29. J.S. Shyu, T.H. Chang, Comparison of superplastic formability between Ti-6Al-4V and Ti-6Al-6V-2Sn alloys, J. Chinese Mater. Sci. 27 (1994) 130.
30. J.H. Cheng, A procedure for designing initial thickness variation for superplastic free inflation, Int. J. Mech. Sci. 36 (1994) 981.
31. J.H. Cheng, S. Lee, Methods for resolving grooving problems in parts manufactured from combined diffusion bonding and superplastic forming process, J. Mater. Processing Technol. 45 (1994) 249.
32. T.H. Chuang, J.S. Shyu, Superplastic forming using internal pressure method, German patent no. DE4341281C2, US patent No. 5449109, ROC patent No. 64904, 1994.
33. M.S. Yeh, T.H. Chuang, Low-pressure diffusion bonding of SAE 316 stainless by inserting a superplastic interlayer, Scripta Metall. Mater. 33 (1995) 1277.
34. J.S. Shyu, T.H. Chuang, Diffusion bonding of Ti-6Al-4V alloy under low pressure, J. Chinese Mater. Sci. 27 (1995) 141.
35. M.S. Yen, C.W. Tsau, T.H. Chuang, Evaluation of superplastic formability of SP-Inconel 718 superalloy, J. Mater. Eng. Perf. 5 (1996) 64.
36. J.S. Shyu, T.H. Chuang, Diffusion bonding/superplastic forming of Ti-6Al-6V-2Sn/SUS 304 stainless steel/Ti-6Al-6V-2Sn, J. Mater. Eng. Perf. 5 (1996) 84.
37. 3, J. Mater. Eng. Perf. 5 (1996) 387.
38. J.H. Cheng, The determination of material parameters from superplastic inflation tests, J. Mater. Processing Technol. 58 (1996) 233.
39. C.F. Yang, L.H. Chiu, S.C. Lee, Superplastic forming of 7475 Al alloy by variable-pressure blowing, Scripta Metall. Mater. 34 (1996) 1555.
40. M.S. Yeh, T.H. Chuang, The SPF/brazing process for Inconel 718 SPF superalloy components, Welding Res. Suppl. May, 1997, p. 1975.
41. M.S. Yeh, T.H. Chuang, Effects of applied pressure on the brazing of superplastic Inconel 718 superalloy, Metall. Mater. Trans. 28A (1997) 1367.
42. Y.T. Wu, C.H. Koo, Effect of texture on the superplasticity of Ti-25Al-10Nb alloy, Intermetallics 5 (1997) 29.
43. T.H. Chuang, Y.S. Tsing, Forming method through superplastic forging, ROC patent No. 82113, 1997.
44. J.H. Cheng, A New Structure for Golf Head and the Method of its Manufacture, ROC patent No. 83104076, US patent No. 5643108, 1997.
45. C.F. Yang, L.H. Chiu, Y.P. Sheu, Effects of thermomechnical treatment on superplasticity of Zn-22%Al alloy, J. Mater. Manufacturing Processes 12 (1997) 199.
46. T.H. Chuang, J.H. Cheng, W.H. Wang, C.F. Yang, C.H. Koo, Research on the superplastic forming and diffusion bonding of aerospace materials, Proc. Natl. Sci. Council, ROC(A) 22 (1998) 103.
47. T.Y. Fang, W.H. Wang, The influence of temporary alloying of hydrogen on the microstructure and superplasticity of Ti-6Al-4V alloy, Proc. Natl. Sci. Counc., ROC(A) 22 (1998) 116.
48. 3 + C), Proc. Natl. Sci. Council, ROC(A) 22 (1998) 126.
49. C.F. Yang, L.H. Chiu, S.C. Lee, J.Y. Sun, Solid state and transient liquid phase diffusion bonding of Al-Zn-Mg alloy, Proc. Natl. Sci. Council, ROC(A) 22 (1998) 132.
50. J.H. Cheng, W.J. Chen, W.S. Tang, S.B. Fengchiang, G.C. Hsiu, H.Y. Change, Design, simulation, manufacture and strength characterization of SPF/DB parts, Proc. Natl. Sci. Council, ROC(A) 22 (1998) 142.
51. Y.T. Wu, C.H. Koo, Effect of temperature on the anisotropic superplasticity of textured Ti-25Al-10Nb alloy, Scripta Metall. Mater. 38 (1998) 267.
52. S. Lee, J. Lee, Comparison of superplastic predictions using 2D plane strain and 3D modeling, J. Mater. Manufacturing Processes 9 (1994) 45.
53. H.Y. Wu, J.T. Chern, S. Lee, Superplastic forming of an Al-Li-Cu-Mg-Zr alloy using varied forming paths, J. Mater. Manufacturing Processes 10 (1995) 1.
54. S. Lee, Thickness distribution in a superplastically formed rectangular pan under plane strain conditions, J. Mater. Processing Technol. 65 (1997) 59.
55. S.C. Chang, J.W. Yeh, D.C. Luu, The superplasticity of Al-Li Alloys, in: M. Peters, P.-J. Winkler, (Eds.), Aluminium-Lithium 6, DGM, Germany, 1992, p. 1047.
56. S.C. Chang, D.C. Luu, T.C. Chen, Phenomenological reasoning for tensile superplasticity, in: T.H. Chuang, J.C. Huang, (Eds.), Proc. Workshop on Superplastic Forming and Diffusion Bonding, Taipei, 1994, p. 276.
57. C.T. Ke, A study of the superplasticity of Zn-22Al-0.5Cu alloy fabricated by reciprocal extrusion, M.Sc. Thesis, National Tsing Hua University, Taiwan, 1997.
58. S.Y. Yuan J.W. Yeh, The improved microstructures and properties of 2024 alloy produced by reciprocal extrusion method, in: T. Chandra, T. Sakai (Eds.), Proc. Thermec '97, TMS, Warrendale, PA, USA, 1997, p. 1143.
59. 3Ni eutectic alloy, Metall. Mater. Trans. 28A (1997) 401.
60. 3Ni eutectic alloy with [1 1 1] fiber texture, Acta Mater. 45 (1997) 623.
61. J.P. Chu, I.M. Liu, J.H. Wu, W. Kai, J.Y. Wang, K. Inoue, Superplastic deformation in coarse-grained Fe-27Al alloys, Mater. Sci. Eng., 1998, in press.
62. T. Imai, G. L'Esperance, B.D. Hing, S. Kojima, High strain rate superplasticity of AlN particulate reinforced IN 90 pure aluminum composite, Scripta Metall. Mater. 33 (1995) 1333.
63. K.C. Tien, Aero industry development center, 1998, private communication.
64. A. Inoue, T. Zhang, Novel superplasticity of supercooled liquid for bulk amorphous alloys, Mater. Sci. Forum 243-245 (1997) 197.
65. R.J. Gottschall, Structure and properties of bulk amorphous alloys, Metall. Mater. Trans. 29A (1998) 1777.
66. R.Z. Valiev, D.A. Salimonenko, N.K. Tsenev, P.B. Berbon, T.G. Langdon, Observations of high strain rate superplasticity in commercial aluminum alloys with ultrafine grain sizes, Scripta Mater. 37 (1997) 1945.