Evaluation of fracture toughness results and transferability to fracture assessment of welded joints

ASTM Special Technical Publication

Volumn , Issue 1332, 1999, Pages 315-340

  Minami, Fumiyoshi ^a   Toyoda, Masao ^a  

^a OSAKA UNIVERSITY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

FRACTURE MECHANICS; FRACTURE TESTING; FRACTURE TOUGHNESS; HEAT AFFECTED ZONE; STRENGTH OF MATERIALS; STRESSES; WEIBULL DISTRIBUTION; WELDS;

FRACTURE INITIATION; FRACTURE RESISTANCE; HETEROGENEITY; LOCAL APPROACH; NOTCH TIP; STRENGTH MISMATCH; TRANSFERABILITY; WEIBULL STRESS; WELD METALS; WELDED JOINTS;

JOINTS (STRUCTURAL COMPONENTS);

EID: 0032671492     PISSN: 10403094     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1520/stp14956s     Document Type: Article

References (54)

1. Squirrell, S.J., Pisarski, H.G. and Dawes, M.G., "Recommended Procedures for the Crack Tip Opening Displacement (CTOD) Testing of Weldments," BSI ISM/4/4, 7807.02/86/485.2, 1986.
2. API RP 2Z, "Recommended Practice for Preproduction Qualification for Steel Plates for Offshore Structures," 1987.
3. Toyoda, M. and Thaulow, C., "Recommendation for CTOD Testing of the Heat Affected Zones of Steel Weldments,' IIW Doc. X-1241-92, 1992.
4. WES 1109-1995, "Guideline for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Test Method of Weld Heat-Affected Zone," The Japan Welding Engineering Society, 1995, (in Japanese).
5. IC, CTOD and J Testing of Weldments in Metallic Material," British Standard Institution, 1995.
6. Draft ASTM Standard Test Method for Fracture Toughness Testing of Ferritic Steel Weldments, Proposed Annex to E1290, 1996.
7. Proceedings of the Workshop on Strength Mismatching and Its Control, Tokyo, IIW Doc. X-1254-92, M. Toyoda, Ed., 1992.
8. Weld Mis-Match Effect, IIW Doc. XF-015-94, M. Koçak, Ed., 1994.
9. Proceedings of the 2nd Workshop on Constraint Effects on the Structural Performance of Welded Joints, Osaka, IIW Doc. X-1300-94, M. Toyoda, Ed., 1994.
10. Mis-Matching of Welds, ESIS 17, K.-H. Schwalbe and M. Koçak, Eds., Mechanical Engineering Publications, 1994.
11. Weld Mis-Match Effect, IIW Doc. XF-027-95, M. Koçak, Ed., 1995.
12. Mis-Matching of Interfaces and Welds, K.-H. Schwalbe and M. Koçak, Eds., GKSS Research Center Publications, 1997.
13. BSI PD6493-1980, "Guidance on Some Methods for the Derivation of Acceptance Levels for Defects in Fusion Welded Joints," British Standard Institution, 1980.
14. WES 2805-1995, "Method of Assessment for Flaw in Fusion Welded Joints with Respect to Brittle Fracture and Fatigue Crack Growth," The Japan Welding Engineering Society, 1995.
15. Larsson, S.G. and Carlsson, A.J., "Influence of Non-Singular Stress Terms and Specimen Geometry on Small-Scale Yielding at Crack Tips in Elastic-Plastic Materials," Journal of Mechanics and Physics of Solids, Vol. 21, 1973, pp. 263-277.
16. Betegón, C. and Hancock, J. W., "Two-Parameter Characterization of Elastic-Plastic Crack-Tip Fields, Journal of Applied Mechanics, Vol. 58, 1991, pp. 104-110.
17. Wang, Y.-Y., "Two-Parameter Characterization of Elastic-Plastic Crack-Tip Fields and Applications to Cleavage Fracture, "Ph. D. Thesis, Department of Mechanical Engineering, Massachusetts Institute of Technology, 1991.
18. O'Dowd, N.P. and Shih, C.F., "Family of Crack-Tip Fields Characterization by a Triaxiality Parameter - I. Structure of Fields, Journal of Mechanics and Physics of Solids, Vol. 39, 1991, pp. 989-1015.
19. O'Dowd, N.P. and Shih, C.F., "Family of Crack-Tip Fields Characterization by a Triaxiality Parameter - II. Fracture Applications, Journal of Mechanics and Physics of Solids, Vol. 40, 1992, pp. 939-963.
20. Dodds, Jr. R.H., "Constraint Effects on Fracture Initiation Loads in HSST Wide-Plate Tests, NUREG/CR-6259, UILU-ENG-94-2009, ORNL/TM-12796, 1994, University of Illinois.
21. Beremin, F. M., "A Local Criterion for Cleavage Fracture of a Nuclear Pressure Vessel Steel, Metallurgical Transactions A, Vol. 14A, 1983, pp. 2277-2287.
22. Mudry, F., "A Local Approach to Cleavage Fracture, "Nuclear Engineering Design, Vol. 105, 1987, pp. 65-76.
23. Nakano, Y., Amano, K., Kudo, J. and Kobayashi, E., "Preheat- and PWHT-Free 150mm Thick API 2W Grade 60 Steel Plate for Offshore Structures," Proceedings of the 7th International Conference on Offshore Mechanics and Arctic Engineering (OMAE), Houston, Vol. 3, 1988, pp. 89-94.
24. Haze, T. and Aihara, S., "Influence of Toughness and Size of Local Brittle Zone on HAZ Toughness of HSLA Steels, "Proceedings of the 7th International Conference on Offshore Mechanics and Arctic Engineering (OMAE), Houston, Vol. 3, 1988, pp. 515-523.
25. Kawabata, F., Amano, K., Toyoda, M. and Minami, F., "Tempering Effect by Succeeding Weld passes on Multi-Layered HAZ Toughness," Proceedings of the 10th International Conference on Offshore Mechanics and Arctic Engineering (OMAE), Stavanger, Vol. 3A, 1991, pp. 73-79.
26. Satoh, K., Toyoda, M. and Minami, F., "The Effect of Thickness on Fracture Toughness of Welds in Steel, Welding in the World, Vol. 26, 1988, pp. 230-249.
27. Minami, F., Toyoda, M., Thaulow, C. and Hauge, M., "Effect of Strength Mis-Match on Fracture Mechanical Behavior of HAZ-Notched Weld Joint, "Quarterly Journal of the Japan Welding Society, Vol. 13 1995, pp. 508-517.
28. Suzuki, S., Bessyo, K., Toyoda, M. and Minami, F., "Property Distribution Map to Understand HAZ CTOD Toughness," Proceedings of the 12th International Conferenceon Offshore Mechanics and Arctic Engineering (OMAE), Glasgow, Vol. 3B, 1993, pp. 753-760.
29. Fairchild, D. P., "Fracture-Toughness Testing of Weld Heat-Affected Zones in Structural Steel," ASTM Symposium on Fatigue and Fracture Testing of Weldments, Sparks, Nevada, 1988.
30. Machida, S., Miyata, T., Toyosada, M. and Hagiwara, Y., "Study on CTOD Test Method of Weldments, ASTM Symposium on Fatigue and Fracture Testing of Weldments, Sparks, Nevada, 1988.
31. Minami, F., Toyoda, M. and Satoh, K., "Probabilistic Analysis of Fracture Toughness of Weld HAZ with LBZ, "Transactions of the Japan Welding Society, Vol. 19, 1988, pp. 45-53.
32. Minami, F., Hada, S., Ruggieri, C. and Toyoda, M., "Analysis of Strength Mis-Matching of Welds on Fracture Performance of HAZ-Notched Joint," Proceedings of the Workshop on Strength Mismatching and Its Control, Tokyo, IIW Doc. X-1254-92, 1992, pp. 77-86.
33. Satoh, K., Toyoda, M., Minami, F., Arimochi, K., Nakanishi, M. and Satoh, S., "A Proposal of Generalized COD Criterion and Its Application to Welds," Quarterly Journal of the Japan Welding Society, Vol. 2, 1984, pp. 447-454, (in Japanese).
34. Arimochi, K., Nakanishi, M., Toyoda, M. and Satoh, K., "Local CTOD Criterion Applied to Fracture Evaluation of Weldments," Proceedings of the International Symposium on Storage and Transport of LPG and LNG, Brugges, 1984.
35. Koçak, M., Schwalbe, K.-H., Chen, L. and Griniss, G., "Effects of Notch Position and Weld Metal Matching on CTOD of HAZ," Proceedings of the International Conference on Weld Failures, London, 1988.
36. Hellmann, D. and Schwalbe, K.-H., "Geometry and Size Effects on J-R and S-R Curves under Plane Stress Conditions," ASTM STP 833, 1984, pp. 577-605.
37. Bilby, B. A., Cottrell, A. H., Smith, E. and Swinden, K. H., "The Spread of Plastic Yield from a Notch," Proceedings of the Royal Society of London, Vol. A272, 1963, pp. 304-314.
38. Toyoda, M., Minami, F., Ruggieri, C., Thaulow, C. and Hauge, M., "Fracture Property of HAZ-Notched Weld Joint with Mechanical Mis-Matching - Part 1. Analysis of Strength Mis-Matching of Welds on Fracture Initiation Resistance of HAZ-Notched Joint," Mis-Matching of Welds, ESIS 17, K.-H. Schwalbe and M. Koçak, Eds., Mechanical Engineering Publications, 1994, pp. 399-415.
39. Miyata, T., Otsuka, A., Otake, T. and Suzuki, Y., "Correlation Between Fracture Toughness and Tensile Strength Properties of Steels," Journal of the Society of Materials Science Japan, Vol. 39, 1990, pp. 1549-1555, (in Japanese).
40. Bakker, A. and Koers, R.W.J., "Prediction of Cleavage Fracture Events in the Brittle-Ductile Transition Region of a Ferritic Steel," ESIS/EGF 9, Mechanical Engineering Publications, 1991, pp. 613-632.
41. Minami, F., Brückner-Foit, A., Munz, D. and Trolldenier, B., "Estimation Procedure for the Weibull Parameters Used in the Local Approach," International Journal of Fracture, Vol. 54, 1992, pp. 197-210.
42. Ruggieri, C., Minami, F., Toyoda, M., Hagiwara, Y. and Inoue, T., "Local Approach to Notch Depth Dependence of CTOD Results," Journal of the Society of Naval Architects of Japan, Vol. 171, 1992, pp. 493-499.
43. Minami, F., Brückner-Foit, A. and Trolldenier, B., "Numerical Procedure for Determining Weibull Parameters Based on The Local Approach, Proceedings of the 8th Biennial European Conference on Fracture - ECF8, Torino, Vol. 1, 1990, pp. 76-81.
44. Wiesner, C. S., "The 'Local Approach' to Cleavage Fracture," An Abington Publishing Special Report, 1996.
45. Ohata, M., Minami, M. and Toyoda, M., "Local Approach to Strength Mis-Match Effect on Cleavage Fracture of Notched Material," Mis-Matching of Interfaces and Welds, K.-H. Schwalbe and M. Koçak, Eds., GKSS Research Center Publications, 1997, pp. 701-712.
46. Gerald, C. F. and Wheatley, P. O., Applied Numerical Analysis, 4th ed., Addison -Wesley Publication, 1989, pp. 299-336.
47. Thoman, D. R., Bain, L. J. and Antle, C. E., "Influences on the Parameters of the Weibull Distribution," Technometrics, Vol. 11, 1969, pp. 445-460.
48. Minami, F., Ohata, M., Toyoda, M., Tanaka, T., Arimochi, K., Glover, A.G. and North, T.H., "The Effect of Weld Metal Yield Strength on the Fracture Behavior of Girth Welds in Grade 550 Pipe," Pipeline Technology, Vol. 1, 1995, pp. 441-461.
49. Minami, F., Ohata, M., Toyoda, M., Tanaka, T., Arimochi, K., Glover, A.G. and North, T.H., "Fracture Toughness Requirement for Fracture Performance Evaluation of Welded Joints Based on the Local Approach," Mis-Matching of Interfaces and Welds, K.-H. Schwalbe and M. Koçak, Eds., GKSS Research Center Publications, 1997, pp. 269-280.
50. Minami, F., Ruggieri, C., Toyoda, M., Arimochi, K., Suzuki, S. and Bessyo, K., "Significance of Shallow Notch CTOD Test in Fracture Performance Evaluation of Welded Joint," Proceedings of the 12th International Conference on Offshore Mechanics and Arctic Engineering (OMAE), Glasgow, Vol. 3B, 1993, pp. 761-768.
51. Minami, F., Ohata, M., Toyoda, M., Arimochi, K., Suzuki, S. and Bessyo, K., "Prediction of Specimen Geometry Effect on Fracture Resistance of HAZ-Notched Welds by the Local Approach," Mis-Matching of Interfaces and Welds, K.-H. Schwalbe and M. Koçak, Eds., GKSS Research Center Publications, 1997, pp. 319-330.
52. Minami, F., Jing, H., Toyoda, M., Kawabata, F. and Amano, K., "Effect of Local Hard Zone on Fracture Initiation of Weld HAZ," Proceedings of the Workshop on Strength Mismatching and Its Control, Tokyo, IIW Doc. X-1254-92, 1992, pp. 23-34.
53. Minami, F., Katou, K., Noguchi, Y., Terai, D., Toyoda, M. and Shimanuki, H., "Fracture Property Improvement for Structural Steel by Local Stress Control in Dual-Phase Microstructure," Journal of the Society of Naval Architects of Japan, Vol. 183, 1997, pp. 361-373, (in Japanese).
54. Minami, F., El-Shennawy, M., Toyoda, M., Kajimoto, K., Fujii, M., Murai. R. and Yanagisawa, E., "Small-Size Fracture Toughness Specimen Using Plastic Constraint by Strength Mis-Matching," Mis-Matching of Interfaces and Welds, K.-H. Schwalbe and M. Koçak, Eds., GKSS Research Center Publications, 1997, pp. 399-409.