Tapered double cantilever beam test used as a practical adhesion test for metal/adhesive/metal systems

Journal of Adhesion Science and Technology

Volumn 13, Issue 7, 1999, Pages 773-788

  Meiller, M ^a   Roche, A A ^a   Sautereau, H ^a  

^a Laboratoire des Materiaux Polymeres et des Biomateriaux UMR 5627   (France)

Author keywords

adhesional failure; critical strain energy release rate; epoxy amine adhesive; Practical adhesion; rubber modified adhesive; tapered double cantilever beam test

Indexed keywords

ADHESION TEST; ADHESIVE FORMULATION; CRACK SPEED; CRITICAL STRAIN ENERGY; CROSSHEAD SPEED; DISPLACEMENT SPEED; DOUBLE CANTILEVER BEAM; DOUBLE CANTILEVER BEAM TEST; EPOXY-AMINE; INTERFACIAL REGION; REACTIVE LIQUID RUBBER; TI6A14V;

ADHESION; ORGANIC COMPOUNDS; BOND STRENGTH (MATERIALS); CANTILEVER BEAMS; CRACK PROPAGATION; EPOXY RESINS; FAILURE ANALYSIS; INTERFACES (MATERIALS); PLASTIC ADHESIVES; RUBBER; STRAIN; TITANIUM ALLOYS;

CANTILEVER BEAMS; ADHESION;

CRITICAL STRAIN ENERGY RELEASE RATE; TAPERED DOUBLE CANTILEVER BEAM TEST;

EID: 0032665584     PISSN: 01694243     EISSN: 15685616     Source Type: Journal    
DOI: 10.1163/156856199X01009     Document Type: Article

References (33)

1. K. L. Mittal, in: Adhesion Measurement of Thin Films, Thick Films and Bulk Coatings, K. L. Mittal (Ed. ), pp. 5-17. STP 640. ASTM, Philadelphia, PA (1978).
2. R. J. Good, in: Adhesion Measurement of Thin Films, Thick Films and Bulk Coatings, K. L. Mittal (Ed. ), pp. 18-30. STP 640. ASTM, Philadelphia, PA (1978).
3. J. J. Bikerman, in: Adhesion Measurement of Thin Films, Thick Films and Bulk Coatings, K. L. Mittal (Ed. ), pp. 30-41. STP 640. ASTM, Philadelphia, PA (1978).
4. W. L. Baun, in: Adhesion Measurement of Thin Films, Thick Films and Bulk Coatings, K. L. Mittal (Ed. ), pp. 41-54. STP 640. ASTM, Philadelphia, PA (1978).
5. W. L. Baun, Appl. Surface Sci. 4, 291-306 (1980).
6. C. B. Bucknall, in: Toughened Plastics, C. B. Bucknall (Ed. ), pp. 243-271. Applied Science Publishers, London (1977).
7. A. J. Kinloch and R. J. Young, in: Fracture Behaviour of Polymers, A. J. Kinloch and R. J. Young (Eds), pp. 74-106. Applied Science Publishers, London (1983).
8. A. G. Atkins and Y. W. Mai, in: Elastic and Plastic Fracture: Metals, Polymers, Ceramics, Composites, Biological Materials, A. G. Atkins and Y. W. Mai (Eds), pp. 75-167. Ellis Horwood, Chichester (1985).
9. A. J. Kinloch, in: Adhesion and Adhesives, A. J. Kinloch (Ed. ), pp. 189-338. Chapman & Hall, London (1987).
10. K. L. Mittal, J. Adhesion Sci. Technol. 3, 247-259 (1987).
11. D. Maugis, in: Adhesive Bonding, L. H. Lee (Ed. ), pp. 303-335. Plenum Press, New York (1991).
12. S. R. Lampman (Ed. ), ASM Handbook, Vol. 19. ASM International, Materials Park, OH (1996).
13. S. Mostovoy and E. J. Ripling, J. Appl. Polym. Sci. 10, 1351-1371 (1966).
14. D. Verchère, H. Sautereau, J. P. Pascault, S. M. Moschiar, C. C. Riccardi and R. J. J. Williams, Polymer 30, 2955-2966 (1985).
15. A. Maazouz, Doctoral Thesis, Institut National des Sciences Appliquées de Lyon, Lyon, France (1993).
16. F. F. De Nogarro, P. Guerrero, M. A. Corcuera and I. Mondragon, J. Appl. Polym. Sci. 56, 177-192(1995).
17. Y. Won, Doctoral Thesis, Institut National des Sciences Appliquées de Lyon, Lyon, France ( 1989).
18. Y. Won, J. Galy, J. F. Gérard, J. P. Pascault, V. Bellenger and J. Verdu, Polymer 31, 1787-1792 ( 1990).
19. Y. Won, J. Galy, J. P. Pascault and J. Verdu, Polymer 32, 79-83 (1991).
20. D. Eylon and R. R. Royer, in: Titanium and Aluminium, P. A. Coulon (Ed. ), pp. 131-137. Institute for Industrial Technology Transfer (IITT-International), Gournay sur Marne, France ( 1989).
21. J. G. Williams and M. J. Cawood, Polym. Testing 9, 15-26 (1990).
22. S. Hashemi and J. G. Williams, J. Mater. Sci. 19, 3746-3759 (1984).
23. E. J. Ripling, S. Mostovoy and R. L. Patrick, Mater. Res. Stand. 4, 129-134 (1964).
24. P. P. Gillis and J. J. Gilhman, J. Appl. Phys. 35, 647 (1964).
25. S. Hashemi, A. J. Kinloch and J. G. Williams, J. Mater. Sci. Lett. 8, 125-129 (1989).
26. B. Blackman, J. P. Dear, A. J. Kinloch and S. Osiyemi, J. Mater. Sci. Lett. 10, 253-256 (1991).
27. B. Gross and J. E. Srawley, NASA Technical Note, D-3295 (1966).
28. W. D. Bascom, R. L. Cottington, R. L. Jones and P. Peyser, J. Appl. Polym. Sci. 19, 2545-2562 ( 1975).
29. W. D. Bascom and R. L. Cottington, J. Adhesion 7, 333-346 (1976).
30. A. J. Kinloch and S. J. Shaw, J. Adhesion 12, 59 (1981).
31. D. L. Hunston, A. J. Kinloch, S. J. Shaw and S. S. Wang, in: Adhesive Joints: Formation, Characteristics and Testing, K. L. Mittal (Ed. ), pp. 789-808. Plenum Press, New York (1984).
32. S. J. Shaw and T. A. Tod, J. Adhesion 28, 231-246 (1989).
33. K. L. De Vries and P. R. Borgmeier, in: Mittal Festschrift on Adhesion Science and Technology, W. J. van Ooij and H. R. Anderson, Jr. (Eds), pp. 615-640. VSP, Utrecht (1998).