Statistical models of brittle deformation. Part I: introduction

International journal of plasticity

Volumn 15, Issue 4, 1999, Pages 401-426

  Krajcinovic, Dusan ^a   Mastilovic, Sreten ^a  

^a Arizona State University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BRITTLENESS; DIFFUSION; MATHEMATICAL MODELS; MICROSTRUCTURE; STATISTICAL MECHANICS; STRENGTH OF MATERIALS;

BRITTLE DEFORMATION; CONTINUUM MODELS; STATISTICAL MODELS;

DEFORMATION;

EID: 0032657380     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0749-6419(98)00067-9     Document Type: Article

References (102)

1. Allen, M.P., Tildesley, D.J., 1994. Computer Simulations of Liquids. Clarendon Press, Oxford, UK.
2. Augusti G., Mariano P. Introduction to computational models of damage mechanics under stochastic actions. Pro. Engng. Mech. 11:1996;107-112.
3. Bazant, Z.P., Cedolin, L., 1991. Stability of Structures, Elastic, Inelastic, Fracture and Damage Theories. Oxford University Press, Oxford, UK.
4. Bazant, Z.P., Planas, J., 1998. Fracture and Size Effect in Concrete and Other Quasibrittle Materials. CRC Press, Boca Raton, FL.
5. Billington, E.W., Tate, A., 1981. The Physics of Deformation and Flow. McGraw-Hill, New York, NY.
6. Bishop J.F.W., Hill R. A Theoretical derivation of the plastic properties of a polycrystalline face-centered Crystal. Phil. Mag. 42:1951;414-427.
7. Born, M., Huang, K., 1956. Dynamical Theory of Crystal Lattices. Oxford University Press, Oxford, UK.
8. Born, M., von Karman, T., 1912. Ueber Schwingugen in Raumgottern. Physikal. Zeit. 13, 297-309.
9. Budiansky B., O'Connell R.J. Elastic moduli of a cracked solid. Int. J. Solids Structures. 12:1976;81-97.
10. Budiansky, B., Wu, T.T., 1962. Theoretical predictions of plastic strains in polycrystals. Proc. 4th U.S. National Congress of Applied Mechanics, vol. 2. ASME Press, New york, NY, pp. 1175-1184.
11. Chaikin, P.M., Lubensky, T.C., 1995. Principles of Condensed Matter Physics. Cambridge University. Press, Cambridge, UK.
12. Chandler, D., 1987. Introduction to Modern Statistical Mechanics. Oxford University Press, New York, NY.
13. Cossack, N.E., 1987. The Physics of Structurally Disordered Matter: An Introduction. Adam Hilger Publ., Bristol, UK.
14. Cuitino A.M., Ortiz M. Computational Modelling of Single Crystals. Modelling Simu. Sci. Eng. 1:1992;225-263.
15. Curtin W.A., Scher H. Brittle fracture in disordered materials: a spring network model. J. Mater. Res. 5:1990;535-553.
16. Evans, A.G., 1984. Fracture in Ceramic Materials. Noyes Publ., Park Ridge, NJ.
17. Eyring H. Viscosity, plasticity and diffusion as examples of absolute reaction rate. J. Chem. Phys. 4:1936;283-291.
18. Feng S., Thorpe M.F., Garboczi E. Effective medium theory of percolation on central-force networks. Phys. Rev. B. 31:1985;276-280.
19. Finkel, V.M., 1977. Physics of Resistance to Rupture. Metallurgia Publ., Moscow.
20. Garrod, C., 1995. Statistical Mechanics and Thermodynamics. Oxford University Press, New York, NY.
21. Germain P., Ngyuen Q.S., Suquet P. Continuum thermodynamics. J. Appl. Mech. 50:1983;1010-1020.
22. Goddard J.D. Nonlinear elasticity and pressure-dependent wave speeds in granular media. Proc. Royal Soc. London A. 430:1990;105-131.
23. Greenspan, D., 1997. Particle Modeling. Birkhauser, Boston, MA.
24. Hansen A., Roux S., Herrmann H.J. Rupture of central-force lattices. J. Phys. France. 50:1989;733-744.
25. Hegemier G.A., Read R.H. Onn deformation and failure of brittle solids: some outstanding issues. Mech. Mater. 4:1985;215-259.
26. Herrmann, H.J., 1993. Computer simulations of granular media. In: Bideau, D., Roux, S. (Eds.), Disorder and Granular Media. Elsevier Science. Publ., Amsterdam, The Netherlands, pp.305-320.
27. Hill R. Elastic properties of reinforced solids: some theoretical principles. J. Mech. Phys. Solids. 11:1963;357-372.
28. Holian B.L., Voter A., Ravelo R. Thermostatted molecular dynamics: how to avoid the tada demon hidden in Nose-Hoover dynamics. Phys. Rev. E. 52:1995;2338-2347.
29. Hoover W.G., Ladd A.J.C., Moran B. High-strain-rate plastic flow studied via nonequilibrium molecular dynamics. Phys. Rev. Lett. 48:1982;1818-1820.
30. Horii H., Nemat-Nasser S. Overall moduli of solids with microcracks: load induced anisotropy. J. Mech. Phys. Solids. 31:1983;155-171.
31. Hutchinson J.W. Elastic-plastic behavior of polycrystalline metals and composites. Proc. Royal Soc., Series A. 319:1976;247-272.
32. Jagota A., Scherer G.W. Viscosities and sintering rates of a two-dimensional granular composite. J. Am. Ceram. Soc. 76:1993;3123-3135.
33. Jenkins, J.T., 1988. Volume changes in small strain axisymmetric deformations of a granular material. In: Jenkins, J.T. (Ed.), Micromechanics of Granular Material. Elsevier Publ., Amsterdam, The Netherlands, pp.245-252.
34. Jirasek M., Bazant Z.P. Particle model for quasbrittle fracture and application to sea ice. J. Engng. Mechanics, ASCE. 121:1995;1016-1025.
35. Ju J.W., Tseng K.H. An improved two-dimensional micromechanical theory for brittle solids with randomly located interacting microcracks. Int. J. Damage Mech. 3:1995;23-57.
36. Kachanov M. A microcrack model of rock inelasticity. Mech. Mater. 1:1992;19-27.
37. Kachanov, 1993.
38. Kanatani K. Distribution of directional data and fabric tensors. Int. J. Engng. Sci. 22:1984;149-164.
39. Kendall ?. The impossibility of comminuting small particles by compression. Nature. 272:1978;710-711.
40. Kestin J. Local-equilibrium formalism applied to mechanics of solids. Int. J. Solids Structures. 29:1992;1827-1836.
41. Kestin, J., Bataille, J., 1978. Irreversible thermodynamics of continua and internal variables. In: Provan, J.W. (Ed.), Continuum Models of Discrete Systems University of Waterloo Press, Waterloo, Canada, pp. 39-67.
42. Kestin, J., Rice, J.R., 1970. Paradoxes in the application of thermo-dynamics to strained solids. In: Stuart, E.B., Gal Or, B., Brainard, A.J. (Eds.), A Critical Review of Thermodynamics. Mono-Book Corporation., Baltimore, MD, pp.275-298.
43. King K.C., Mura T. The Eigenstrain method for small defects in a lattice. J. Phys. Chem. Solids. 52:1991;1019-1030.
44. Krajcinovic, D., 1996. Damage Mechanics. North-Holland Series in Applied Mathematics and Mechanics, Vol. 41. North-Holland, Elsevier, Amsterdam, The Netherlands.
45. Krajcinovic, D., 1997a. Essential structure of damage mechanics theories. In: Tatsumi, T., Watanabe, E., Kambe, T. (Eds.), Theoretical and Applied Mechanics 1996, Proc. 19th IUTAM. North-Holland, Amsterdam, The Netherlands, pp. 411-426.
46. Krajcinovic D. Effective material properties in the limit of large defect concentration. Engng, Fracture Mech. 57:(2/3):1977;227-240.
47. Krajcinovic D., Basista M. Rupture of central-force lattices revisited. J. Phys. I. 1:1991;241-245.
48. Krajcinovic D., Fanella D. A micromechanical damage model for concrete. Engng. Fracture Mech. 25:1986;585-596.
49. Krajcinovic D., Mallick K. Micromechanics of the process induced damage in thermosets. J. Mech. Phys. Solids. 42:1995;1059-1086.
50. Krajcinovic D., Mastilovic S. Some fundamental issues of damage mechanics. Mech. Mater. 21:1995;217-230.
51. Krajcinovic D., Vujosevic M. Strain localization - short to long correlation length transition. Int. J. Solids Structures. 35:1998;4147-4166.
52. Kreher, W., Pompe, W., 1989. Internal Stresses in Heterogeneous Solids. Akademie Verlag, Berlin, Germany.
53. Kroner E., Datta B.K. Nichtlokale Elastostatik: Ableitung aus der Gittertheorie. Zeit. Physik. 196:1966;203-211.
54. Kunin, I.A., 1983. Elastic Media with Microstructure II. Springer-Verlag, Berlin, Germany.
55. Landau, L.D., Lifshitz, E.M., 1959. Theory of Elasticity, Pergamon Press, Oxford, UK.
56. Li M., Johnson W.L. Fluctuations and thermodynamic response functions in a Lennard-Jones solid. Phys. Rev. B. 46:1992;5237-5241.
57. Love, A.E.H., 1927. A Treatise on the Mathematical Theory of Elasticity. Cambridge University Press, Cambridge, UK.
58. Lubarda V.A., Krajcinovic D. Damage tensors and the crack density distribution. Int. J. Solids Structures. 30:1993;859-2877.
59. Lubarda V.A., Krajcinovic D. Some fundamental issues in rate theory of damage-elastoplasticity. Int. Journal of Plasticity. 11:(7):1995;763-797.
60. Ma, S.-k., 1975. Statistical Mechanics. World Scientific, Philadelphia, PA.
61. Malvern, L.E., 1969. Introduction to the Mechanics of a Continuous Media. Prentice-Hall Inc., Englewood Cliffs, NJ.
62. Mariano, P.M., Augusti, G., 1998. Multifield description of microcracked continua. Math. and Mech. Solids, in press.
63. Maugin, G.A., 1992. The Thermodynamics of Plasticity and Fracture. Cambridge University Press, Cambridge, UK.
64. Mehrabadi M.M., Nemat-Nasser S., Oda M. On statistical description of stress and fabric in granular materials. Int. J. Num. And Anal. Methods in Geomech. 6:1992;95-108.
65. Mindlin R.D. Elasticity, piezzoelectricity and crystal dynamics. J. of Elasticity. 2:1972;217-282.
66. Monette L., Anderson M.P. Elastic and fracture properties of the two-dimensional triangular and square lattices. Modelling and Simulations in Materials Science and Engng. 2:1994;53-66.
67. MRS Bulletin, 1996, 21.
68. Mura, T., 1982. Micromechanics of Defects in Solids. M. Nijhoff Publ., The Hague, The Netherlands.
69. Nakamura T., Suresh S. Effects of thermal residual stresses and fiber packing on deformation of metal-matrix composites. Acta metall. mater. 41:1993;1665-1681.
70. Nemat-Nasser, S., Hori, M., (1993). Micromechanics: Overall Properties of Heterogeneous Materials. North-Holland, Amsterdam, The Netherlands.
71. Ortiz M. Computational micromechanics. Computational Mechanics. 18:1996;321-338.
72. Ostoja-Starzewski M. Micromechanics as a basis of continuum random fields. Appl. Mech. Rev. 47:1994;S221.
73. Ostoja-Starzewski M., Sheng P.Y., Jasiuk I. Damage patterns and constitutive response of random matrix-inclusion composites. Engn. Fracture Mech. 58:1997;581-606.
74. Parrinello M., Rahman A. Polymorphic transitions in single crystals: a new molecular dynamic method. J. Appl. Phys. 52:1981;7182-7190.
75. Phillips, R., 1995. The modeling of interfaces: atoms or continua? J. of Metals, March, 37-75.
76. Plimpton S. Fast parallel algorithms for short-range molecular dynamics. J. of Computational Physics. 117:1995;1-19.
77. Prigogine, I., Stengers, I., 1988. Order Out of Chaos. Bantam Books, Toronto, Canada.
78. Raiser G., Clifton R.J., Ortiz M. A soft-recovery plate impact experiment for studying microcracking in ceramics. Mech. Mater. 10:1990;43-58.
79. Reches Z., Lockner D.A. Nucleation and growth of faults in brittle rock. J. Geophys. Res. 99:1994;18159-18173.
80. Rice J.R. Inelastic constitutive equations for solids: an internal-variable theory and its applications to metal plasticity. J. Mech. Phys. Solids. 19:1971;433-455.
81. Rice, J.R., 1975. Continuum mechanics and thermodynamics of plasticity in relation to microscale deformation mechanisms, In: Argon, A.S. (Eds.), Constitutive Equations in Plasticity. MIT Press, Cambridge, MA, pp.23-79.
82. Rice, J.R., 1976. The localization of plastic deformation. In: Koiter, W.T. (Ed.), Proc. 14th Int. Congress of Theor. and Appl. Mech. North-Holland Publ. Co., Amsterdam, The Netherlands, pp. 435-454.
83. Rolfe, S.T., Barsom, J.M., 1977. Fracture and Fatigue Control in Structures, Application of Fracture Mechanics. Prentice-Hall Inc., Englewood Cliffs, NJ.
84. Schlangen E., van Mier J.G.M. Micromechanical analysis of fracture of concrete. Int. J. Damage Mech. 1:1992;435-454.
85. Schraad M.W., Triantafyllidis N. Scale effect in media with periodic and nearly periodic microstructures, Part I: macroscopic properties. J. Appl. Mech. 64:1997;751-762.
86. Shaw J.A., Kyriakides S. Initiation and propagation of localized deformation in elasto-plastic strips under initial tension. Int. J. of Plasticity. 13:(10):1997;837-872.
87. Stauffer, D., Aharoni, A., 1992. Introduction to Percolation Theory, second ed. Taylor & Francis, Washington, DC.
88. Sumarac D., Krajcinovic D. A self-consistent model for microcrack weakened solids. Mech. Mater. 6:1987;39-52.
89. Suresh, S., 1991. Fatigue of Materials, Cambridge University Press, Cambridge, UK.
90. Tadmor E.B., Ortiz M., Phillips R. Quasicontinuum analysis of defects in solids. Phil. Mag. A. 73:1996;1529-1563.
91. Termonia Y., Meakin P., Smith P. Theoretical study of the influence of the molecular weight on the maximum tensile strength of polymer fibers. Macro-molecules. 18:1985;2246-2252.
92. Thomas, T.Y., 1961. Plastic Flow and Fracture in Solids. Academic Press, London, UK.
93. Torquato S. Random heterogeneous media: microstructure and improved bounds on effective properties. Appl. Mech. Rev. 44:1991;37-76.
94. Trent B.C., Margolin L.G. Numerical validation of a constitutive theory for an arbitrarily fractured solid. Engng. Comput. 12:1995;125-134.
95. Tzschichholz F., Herrmann H.J., Roman H.E., Pfuff M. Beam model for hydraulic fracturing. Phys. Rev. B. 49:1994;7056-7059.
96. Van Mier, J.G.M., 1997. Fracture Processes in Concrete. CRC Press, New York, NY.
97. Vitek, V., 1996. Pair potentials in atomistic computer simulations. MRS Bulletin 21, 20-23.
98. Voyiadjis, G.Z., Kattan, P.I., 1992. A plasticity damage theory for large deformation of solids - I. Theoretical Formulation. Int. J. Engn. Sci. 30, 1089-1108.
99. Vujosevic M., Krajcinovic D. Creep rupture of polymers - a statistical model. Int. J. Solids Structures. 34:1997;1105-1122.
100. Weiner, J.H., 1983. Statistical Mechanics of Elasticity. J. Wiley & Sons, New York, NY.
101. Zallen, R., 1983. The Physics of Amorphous Solids. J. Wiley & Sons, New York, NY.
102. Zheng, Q.-S., Hwang, H.C., 1996. Two-dimensional elastic compliances of materials with holes and microcracks. Proc. Royal Soc. London, vol. A452, p. 2493-2507.