Vibrational and acoustical experiments on logs of spruce

Wood Science and Technology

Volumn 33, Issue 2, 1999, Pages 151-184

  Ouis, D ^a  

^a LUND INSTITUTE OF TECHNOLOGY   (Sweden)

Author keywords

[No Author keywords available]

Indexed keywords

DAMPING; DECAY (ORGANIC); STRENGTH OF MATERIALS; VIBRATIONS (MECHANICAL);

SPRUCE;

LUMBER;

EID: 0032656226     PISSN: 00437719     EISSN: None     Source Type: Journal    
DOI: 10.1007/s002260050106     Document Type: Article

References (70)

1. Bariska M, Ozuský A, Bosshard HH (1983) Changes in Mechanical Properties of Wood After Decomposition by Basidiomycetes. Holz Roh-Werkstoff 41: 241-245
2. Bechtel FK (1986) Use of the Metriguard Model 239 A Stress Wave Timer. Brochure from the Metriguard Inc., Pullman. Washington
3. Becker HF (1980) Viscoelastic Properties of Beech Wood at Periodically Bending Stresses. Holz Roh- Werkstoff 38: 301-306
4. Bethge K, Mattheck C, Hunger E (1996) Equipment for Detection and Evaluation of Incipient Decay in Trees. Arboricultural Journal 20: 13-37
5. Bodig J, Jayne BA (1982) Mechanics of wood and wood composites. Van Nortsrand Reinhold. New York
6. Breeze JE, Nilberg R (1971) Predicting by Sonic Measurements the Strength of Logs and Poles Having Internal Decay. Forest Prod. J. 21(5): 39-43
7. Bulleit WM, Falk RH (1985) Modeling Stress Wave Passage Times in Wood Utility Poles. Wood Sci. Technol. 19: 183-191
8. Burmester von A (1965) Relationship Between Sound Velocity and the Morphological, Physical and Mechanical Properties of Wood. Holz Roh- Werkstoff 23: 227-236
9. Burrows JO, Fridley JL (1988) Preliminary Investigation into Some Engineering Characteristics of Loblolly Pine Trees. Transactions of the American Society of Agricultural Engineers 31: 998-1004
10. Chui YH (1989) Vibration Testing of Wood and Wooden Structures, Practical Difficulties and Possible Sources of Error. Proceedings of the 7th Nondestructive Testing of Wood Symposium pp 173-188
11. Chui YH (1991) Simultaneous Evaluation of Bending and Shear Moduli of Wood and the Influence of Knots on these Parameters. Wood Sci. Technol. 25: 125-134
12. Chui YH, Smith I (1990) Influence of Rotatory Inertia, Shear Deformation and Support Condition on Natural Frequencies of Wooden Beams. Wood Sci. Technol. 24: 233-245
13. Cremer L, Heckl M (1988) Structure borne sound. 2nd Edition. Springer Verlag, Berlin
14. Divós F, Sugiyama MK (1993) Longitudinal Stress Waves for Detecting the Presence, Location and Size of Artificial Defects in Wood and Wood-Based Composites. Poster presentation. Proceedings of the Ninth International Symposium on Nondestructive Testing of Wood, Madison, pp 218-219
15. Dunlop JI (1978) Damping Loss in Wood at Mid Kilohertz Frequencies. Wood Sci. Technol. 12: 49-62
16. Dunlop JI (1981) Testing of Poles by Using Acoustic Pulse Method. Wood Science and Technology 15: 301-310
17. Dunlop JI (1983) Testing of Poles by Acoustic Resonance. Wood Sci. Technol. 17: 31-38
18. Falk RH (1983) Nondestructive Testing of Wood Utility Poles Using a Sonic Device. M.Sc Thesis, Michigan Tehnological University, Houghton, MI
19. Fournier M, Rogier MP, Costes E, Jaeger M (1993) Mechanical Model of Wind-Induced Natural Sways of Trees Related to Branching Patterns. Annales des Sciences Foréstieres 50: 401-412
20. Fukada E (1950) The Vibrational Properties of Wood I. J. Physical Society of Japan 5: 321-326
21. Gerhards CC (1982) Longitudinal Stress Waves for Lumber Stress Grading: Factors Affecting Application: State of the Art. Forest Prod. J. 32: 20-25
22. Glos P (1989) Strength of Spruce Structural Timber with Insect Damage and Fungal Decay. Holz Roh-Werkstoff 47: 329-335
23. Graff KF (1975) Wave motion in elastic solids. Clarendon Press, Oxford
24. Haines DW, Leban JM, Herbé C (1996) Determination of Young's Modulus for Spruce, Fir and Isotropic Materials by Resonance Flexure Method with Comparisons to Static Flexure and Other Dynamic Methods. Wood Sci. Technol. 30: 253-265
25. Hearmon RFS (1958) The Influence of Shear and Rotatory Inertia on the Flexural Vibration of Wooden Beams. British J. Applied Physics 9: 381-388
26. Hearmon RFS (1966) Vibration Testing of Wood. Forest Prod. J. 16: 29-40
27. Kim GH, Barnes HM, Lyon DE (1994) Effect of Decay on the Mechanical Properties of Full-Sized Lumber. Holzforschung 48: 145-149
28. Kirk TK, Highley TL (1973) Quantitative Changes in Structural Components of Conifer Woods During Decay by White- and Brown-Rot Fungi. Phytopathology 63: 1339-1342
29. Kodama Y (1990) A method of Estimating the Elastic Modulus of Wood with Variable Cross-Section Forms by Sound Velocity. J. Japan Wood Research Society 36: 997-1003
30. Kunesh RH (1968) Strength and Elastic Properties of Wood in Transverse Compression. Forest Prod. J. 18: 65-72
31. Kuttruff H (1991) Room acoustics. 3rd edition. Elsevier Applied Science, London
32. Marra GG, Pellerin RF, Galligan WL (1966) Nondestructive Determination of Wood Strength and Elasticity by Vibration. Holz Roh- Werkstoff 24: 461-466
33. Mattheck CG (1990) Why They Grow, How They Grow: The Mechanics of Trees. Arboricultural J. 14: 1-17
34. Mattheck CG (1992) Design in der Natur. Rombach Verlag, Freiburg
35. Mattheck CG, Bethge KA (1992) An impulse Hammer for the Detection of Defects in Trees. Deutscher Gartenbau 44: 2683-2685
36. Mattheck CG, Bethge KA (1993) Detection of Decay in Trees with the Metriguard Stress Wave Timer. J. Arboriculture 19: 374-378
37. McCracken FI, Vann SR (1983) Sound Can Detect Decay in Standing Hardwood Trees. USDA Research Paper SO-195. Southern Forest Experiment Station
38. Nanami N, Nakamura N, Arima T, Okuma M (1992a) Measuring the Properties of Standing Trees with Stress Waves I. J. Japan Wood Research Society 38: 739-746
39. Nanami N, Nakamura N, Arima T, Okuma M (1992b) Measuring the Properties of Standing Trees with Stress Waves II. J. Japan Wood Research Society 38: 747-752
40. Nanami N, Nakamura N, Arima T, Okuma M (1992c) Measuring the Properties of Standing Trees with Stress Waves III: Evaluating the Properties of some Standing Trees for Some Forest Stands. J. Japan Wood Research Society 38: 903-909
41. Newland DE (1986) Random vibrations and spectral analysis, an introduction. 2nd edition. Longman, Harlow
42. Nilson F, Pelikane P (1993) Three-Dimensional Model for Wood-Pole-Strength Predictions. J. of Structural Engineering 19: 2199-2214
43. Ohlsson S, Perstorper M (1992) Elastic Wood Properties from Dynamic Tests and Computer Modeling. J. Structural Engineering 118: 2667-2690
44. Ono T (1983) On Dynamic Mechanical Properties in the Trunks of Woods for Musical Instruments. Holzforschung 37: 245-250
45. Peabody AB, Wekeser JW (1994) Buckling Strength of Wood Power Poles Using Finite Elements. J. Structural Engineering 120: 1893-1908
46. Perstorper M (1993) Dynamic Modal Tests of Timber Evaluation According to the Euler and Timoshenko Theories. Ninth International Symposium on Nondestructive Testing of Wood, Madison, pp 45-54
47. Pratt JE (1979) Loss of Strength of Wood in Various Categories of Rot. Forestry 52: 31-45
48. Rayleigh JWS (1945) The theory of sound. vol. I and II Dover Publications. New York
49. Ross JR, Pellerin RF (1988) NDE of Wood-Based Composites with Longitudinal Stress Waves. Forest Prod. J. 38: 39-45
50. Ross JR, Pellerin RF (1991) NDE of Green Material with Stress Waves: Preliminary Results Using Dimension Lumber. Forest Prod. J. 41: 57-59
51. Ross R, deGroot R, Schad KC (1993) Pulse Echo Analysis: a Potential Tool for Nondestructive Detection of Decay in Utility Poles. Poster presentation. Proceedings of the Ninth International Symposium on Nondestructive Testing of Wood. Madison, p 220
52. Schad KC, Schmoldt DL, Ross R (1996) Nondestructive Methods for Detecting Defects in Softwood Logs. USDA Research Paper, Forest Products Laboratory, FPL-RP-546. Madison
53. Schniewind AP (1989) Concise encyclopedia of wood and wood-based materials. Pergamon Press, Oxford
54. Sexton CM, Corden ME, Morell JJ (1993) Assessing Fungal Decay of Wood by Small-Scale Toughness Tests. Wood and Fiber Science 25: 375-383
55. Skatter S (1996) TV Holography as a Possible Tool for Measuring Transverse Vibration of Logs: a Pilot Study. Wood and Fiber Science 28: 278-285
56. Smith S, Graham RD (1983) Relationship between Early Decay and Radial Compression Strength of Douglas-Fir. Forest Prod. J. 33: 49-52
57. Sobue N (1986a) Instantaneous Measurement of Elastic Constants by Analysis of the tap Tone of Wood. Journal of the Japan Wood Research Society 32: 274-279
58. Sobue N (1986b) Measurement of Young's Modulus by the Transient Longitudinal Vibration of Wooden Beams Using a Fast Fourier Transformation Spectrum Analyser. J. Japan Wood Research Society 32: 744-747
59. Sobue N (1990) Correction Factors of the Resonance Frequency for Tapering and Shear Deformation of a Log in Flexural Vibration. J. Japan Wood Research Society 36: 760-764
60. Tanaka C, Nakao T, Takahashi A (1986) Acoustic Property of Wood I: Impact Sound Analysis of Wood. J. Japan Wood Research Society 33: 811-817
61. Timoshenko S, Young DH, Weaver W (1974) Vibration problems in engineering. John Wiley. New York
62. Toole ER (1971) Reduction in Crushing Strength and Weight Associated with Decay by Rot Fungi. Wood Science 3: 172-178
63. Trafakla (1979) Nr 21 Gran. Särtryck ur Träindustrin 11
64. Verma SP, Singhal RK, Williams K (1987) Vibration Behaviour of Stators of Electrical Machines, Part I: Theoretical Study and Part II: Experimental Study. J. Sound and Vibration 115: 1-23
65. Wang H, Williams K (1996) Vibrational Modes of Thick Cylinders of Finite Length. J. Sound and Vibration 191: 955-971
66. Wang SC, Suchsland O, Hart JH (1980) Dynamic Test for Evaluating Decay in Wood. Forest Prod. J. 30: 35-37
67. Wilcox WW (1978) Review of Literature on the Effects of Early Stages of Decay on Wood Strength. Wood and Fiber Science 9: 252-257
68. Wilkinson DM (1995) Modelling Tree Crowns as Geometric Solids. Arboricultural J. 19: 387-393
69. Yanagiwara M, Ohsima S, Yoshimura N (1986) Inspection of Defects in Wood by Impact Excitation Method. Japanese J. Applied Physics 25: 206-208
70. Yung C, Fridley RB (1975) Simulation of Vibration of Whole Tree Systems Using Finite Elements. Transactions of the American Society of Agricultural Engineers 18: 475-481