Plasticity of continuous fiber-reinforced metals

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 30, Issue 7, 1999, Pages 1843-1866

  Bystricky, Pavel ^a,b   Bjerregård, Henrik ^c,d   Mortensen, Andreas ^a,e  

^a USA   (United States)

^b CeraNova Corporation   (United States)

^c TECHNICAL UNIVERSITY OF DENMARK   (Denmark)

^d DANISCO A S   (Denmark)

^e EPFL   (Switzerland)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINA; COPPER; DISLOCATIONS (CRYSTALS); PLASTIC FLOW; PLASTICITY; STRAIN HARDENING; STRAIN MEASUREMENT; STRAIN RATE; TENSILE PROPERTIES;

FLOW STRESS; PRESSURE INFILTRATION; THERMAL MISMATCH STRAINS;

FIBER REINFORCED METALS;

EID: 0032645870     PISSN: 10735623     EISSN: None     Source Type: None    
DOI: 10.1007/s11661-999-0183-9     Document Type: Article

References (89)

1. A. Kelly and H. Lilholt: Phil. Mag., 1969, vol. 20, pp. 311-28.
2. R.E. Lee and S.J. Harris: J. Mater. Sci., 1974, vol. 9, pp. 359-68.
3. O.B. Pedersen: Acta Metall., 1983, vol. 31, pp. 1795-1808.
4. O.B. Pedersen: Acta Metall., 1990, vol. 38, pp. 1201-19.
5. J.J. Stephens, J.P. Lucas, and KM. Hosking: Scripta Metall., 1988, vol. 22, pp. 1307-12.
6. S.V. Kamat, J.P. Hirth, and R. Mehrabian: Acta Metall., 1989, vol. 37, pp. 2395-2402.
7. S.M. Pickard and B. Derby: Acta Metall. Mater., 1990, vol. 38, pp. 2537-52.
8. F.J. Humphreys, A. Basu, and M.R. Djazeb: 12th Risø Int. Symp. on Metallurgy and Materials Science: Metal Matrix Composites -Processing, Microstructure and Properties, Roskilde, Denmark, 1991, N. Hansen, D. Juul-Jensen, T. Leffers, H. Lilholt, T. Lorentzen, A.S. Pedersen, O.B. Pedersen, and B. Ralph, eds., Risø National Laboratory, Roskilde, Denmark, 1991, pp. 51-66.
9. R.J. Arsenault, L. Wang, and C.R. Feng: Acta Metall. Mater., 1991, vol. 39, pp. 47-57.
10. R.M. Aikin and L. Christodolou: Scripta Metall. Mater., 1991, vol. 25, pp. 9-14.
11. S.V. Kamat, A.D. Rollett, and J.P. Hirth: Scripta Metall. Mater., 1991, vol. 25, pp. 27-32.
12. J.J. Lewandowski, D.S. Liu, and C. Liu: Scripta Metall. Mater., 1991, vol. 25, pp. 21-26.
13. D.J. Lloyd: Int. Mater. Rev., 1994, vol. 39, pp. 1-23.
14. J.H. Shyong and B. Derby: Mater. Sci. Eng., 1995, vol. A197, pp. 11-18.
15. T.W. Gustafson, P.C. Panda, G. Song, and R. Raj: Acta Mater, 1997, vol. 45, pp. 1633-43.
16. T.W. Clyne and P.J. Withers: An Introduction to Metal Matrix Composites, Cambridge University Press, Cambridge, United Kingdom, 1993.
17. M. Rhee, J.P. Hirth, and H.M. Zbib: Acta Mater., 1994, vol. 42, pp. 2645-55.
18. G.J. Dvorak: in Metal Matrix Composites: Mechanisms and Properties, R.K. Everett and R.J. Arsenault, eds., Academic Press, Boston, MA, 1991, pp. 1-78.
19. J.R. Brockenbrough, S. Suresh, and H.A. Wienecke: Acta Metall. Mater., 1991, vol. 39, pp. 735-52.
20. P.E. McHugh, R.J. Asaro, and C.F. Shih: in Fundamentals of Metal Matrix Composites, S. Suresh, A. Mortensen, and A. Needleman, eds., Butterworth and Co., Boston, MA, 1993, pp. 139-57.
21. Y.L. Shen, M. Finot, A. Needleman, and S. Suresh: Acta Metall. Mater., 1995, vol. 43, pp. 1701-22.
22. J. Yang, S.M. Pickard, C. Cady, A.G. Evans, and R. Mehrabian: Acta Metall. Mater., 1991, vol. 39, pp. 1863-69.
23. M.S. Hu, J. Yang, H.C. Cao, A.G. Evans, and R. Mehrabian: Acta Metall. Mater., 1992, vol. 40, pp. 2315-26.
24. R. Hill: J. Mech. Pliys. Solids, 1964, vol. 12, pp. 213-18.
25. J.F. Mulhern, T.G. Rogers, and A.J.M. Spencer: J. Inst. Math. Appl, 1967, vol. 3, pp. 21-40.
26. H.J. Böhm: Ph.D. Thesis, Technical University of Vienna, Vienna, 1991.
27. J.R. Brockenbrough and S. Suresh: Scripta Metall. Mater., 1990, vol. 24, pp. 325-30.
28. T. Nakamura and S. Suresh: Acta Metall. Mater., 1993, vol. 41, pp. 1665-1.
29. J.A. Isaacs and A. Mortensen: Metall. Trans., A1992, vol. 23A, pp. 1207-19.
30. K. Morii and Y. Nakagawa: Scripta Metall., 1985, vol. 19, pp. 185-88.
31. H.J. McQueen and K. Conrod: Microstructural Control in Aluminum Alloys: Deformation, Recovery and Recrystallization, Proc. Conf., New York, NY, 1985, E.H. Chia and H.J. McQueen, eds., TMS, Warrendale, PA, 1985, pp. 197-219.
32. P.R. Swann: in Electron Microscopy and Strength of Crystals, G. Thomas and J. Washburn, eds., Interscience Publishers, New York, NY, 1963, pp. 131-81.
33. L.E. Murr: Interfacial Phenomena in Metals and Alloys, AddisonWelsey Publishers, Reading, MA, 1975, pp. 142-63.
34. J.A. Isaacs, F. Taricco, V.J. Michaud, and A. Mortensen: Metall. Trans. A, 1991, vol. 22A, pp. 2855-62.
35. R.C. Dorward: Metall. Trans., 1973, vol. 4, pp. 507-12.
36. M.J. Saarivirta and H.S. Cannon: Met. Progr., 1959, vol. 72, pp. 81-84.
37. J.L. Murray: Bull. Alloy Phase Diagrams, 1983, vol 4, pp. 81-95.
38. D.E. Laughlin and J.W. Cahn: Acta Metall., 1975, vol. 23, pp. 329-39.
39. A. Datta and W.A. Soffa: Acta Metall, 1976, vol. 24, pp. 987-1001.
40. T.K. Vaidyanathan and K. Mukherjee: J. Mater. Sci., 1975, vol. 10, pp. 1697-1710.
41. H.T. Michels, I.B. Cadoff, and E. Levine: Metall. Trans., 1972, vol. 3, pp. 667-74.
42. P. Bystricky: Ph.D. Thesis, Massachusetts Institute of Technology, Cambridge, MA, 1997.
43. R.A. Schapery: J. Comp. Mater., 1968, vol. 2, pp. 380-404.
44. R.J. Vaidya and K.K. Chawla: Comp. Sci. Technol. 1994, vol. 50, pp. 13-22.
45. R.P. Reed and A.-F. Clark: Materials at Low Temperatures, ASM, Metals Park, OH, 1983, p. 590.
46. Y.S. Touloukian, R.K. Kirby, R.E. Taylor, and P.D. Desai: Thermal Expansion - Metallic Elements and Alloys, IFI/Plenum Publishers, New York, NY, 1975, pp. 2-12.
47. Y.S. Touloukian, R.K. Kirby, R.E. Taylor, and T.Y.R. Lee: Thermal Expansion - Nonmetallic Elements and Alloys, IFI/Plenum Publishers, New York, NY, 1977, pp. 176-93.
48. Metals Handbook, Desk ed. H.E. Boyer and T.L. Gall, eds., ASM, Metals Park, OH, 1985, p. 1.49.
49. W.H. Cubberly: Metals Handbook, 9th ed., vol. 2, Properties and Selection: Nonferrous Alloys and Pure Metals, ASM, Metals Park, OH, 1979, pp. 275 and 429.
50. C.S. Barrett and T.B. Massalski: Structure of Metals -Crystallographic Methods, Principles and Data, 3rd revised ed., Pergamon Press, Oxford, United Kingdom, 1980, p. 627.
51. A.R. Champion, W.H. Krueger, H.S. Hartmann, and A.K. Dhingra: 1978 Int. Conf. on Composite Materials ICCM 2, Proc. Conf., Toronto, 1978, B. Noton, R.A. Signorelli, K.N. Street, and L.N. Phillips, eds., TMS, Warrendale, PA, 1978, pp. 883-904.
52. J.C. Romine: Ceram. Eng. Sci. Proc., 1987, vol. 9, pp. 755-65.
53. A.K. Dhingra: Phil. Trans. R. Soc. London, 1980, vol. 294, pp. 559-64.
54. H. Deve: 3M Corporation, St. Paul, MN, personal communication, 1995.
55. J.A. Isaacs: Ph.D. Thesis, Massachusetts Institute of Technology, Cambridge, MA, 1991.
56. R. Hill: J. Mech. Phys. Solids, 1964, vol. 12, pp. 199-212.
57. J.K. Mackenzie: Proc. R.Soc. London, 1950, vol. B63, pp. 2-11.
58. J.B. Wachtman, WE. Tefft, D.G. Lam, and C.S. Apstein: Phys. Rev. A, 1961, vol. 122, pp. 1754-59.
59. O.L. Anderson: Phys. Rev. A, 1966, vol. 144, pp. 553-57.
60. C. Beraud, M. Courbière, C. Esnouf, D. Juve, and D. Tréheux: J. Mater. Sci., 1989, vol. 24, pp. 4545-54.
61. P. Kritsalis, L. Coudurier, and N. Eustathopoulos: J. Mater. Sci., 1991, vol. 26, pp. 3400-08.
62. N. Eustathopoulos and A. Mortensen: in Fundamentals of Metal Matrix Composites, S. Suresh, A. Mortensen, and A. Needleman, eds., Butterworth-Heinemann, Boston, MA, 1993, pp. 42-58.
63. P.R. Chidambaram, G.R. Edwards, and D.L. Olson: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 2083-90.
64. H. Lilholt: Work Hardening and Fibre Reinforcement, Certificate of Post-Graduate Study In Natural Science (Metallurgy), thesis, 1968, University of Cambridge, Cambridge, United Kingdom,
65. S. Suresh and J. Brockenbrough: in Fundamentals of Metal Matrix Composites, S. Suresh, A. Mortensen, and A. Needleman, eds., Butterworth-Heinemann, Stoneham, MA, 1993, pp. 174-90.
66. H.J. Böhm and F.G. Rammerstorfer: Mater. Sci. Eng., 1991, vol. A135, pp. 185-88.
67. G. Garmong: Metall. Trans., 1974, vol. 5, pp. 2183-90.
68. W.R. Tyson: Metall. Trans. A, 1975, vol. 6A, pp. 1674-77.
69. A.R.T.da Silva and G.A. Chadwick: J. Mech. Phys. Solids, 1969, vol. 17, pp. 387-403.
70. X. Dumant, F. Fenot, and G. Regazzoni: 9th Risø Int. Symp. on Metallurgy and Materials Science, Risø National Laboratory, Roskilde, Denmark, 1988, S.I. Andersen, H. Lilholt, and O.B. Pedersen, eds., Risø National Laboratory, Roskilde, Denmark, 1988, pp. 349-356.
71. W. Lacom, J. Qu, H.P. Degischer, T. Schmitt, and H. Leitner: Int. Conf. on Light Metals, T. Khan and G. Effenberg, eds., ASM INTERNATIONAL, Metals Park, OH, 1991, pp. 711-18.
72. D. Masutti, J.P. Lentz, and F. Delannay: J. Mater. Sci. Lett., 1990, vol. 9, pp. 340-42.
73. H.J. Böhm, H.P. Degischer, W. Lacom, and J. Qu: Comp. Eng. 1995, vol. 5, pp. 37-49.
74. G.S. Daehn, P.M. Anderson, and H. Zhang: Scripta Metall. Mater., 1991, vol. 25, pp. 2279-84.
75. H. Zhang, P.M. Anderson, and G.S. Daehn: Metall. Mater. Trans. A, 1994, vol. 25A, 415-25. pp.
76. D. Gould, P.B. Hirsch, and F.J. Humphreys: Phil. Mag., 1974, vol. 30, pp. 1353-77.
77. K. Wakashima, M. Otsuka, and S. Umekawa: J. Comp. Mater., 1974, vol. 8, pp. 391-404.
78. S. Yoda, N. Kurihara, K. Wakashima, and S. Umekawa: Metall. Trans. A, 1977, vol. 8A, pp. 2028-30.
79. F. Haessner and J. Schmidt: Acta Metall. Mater., 1993, vol. 41(6), pp. 1739-49.
80. M. Taya and R.J. Arsenault: Metal Matrix Composites: Thermomechanical Behavior, Pergamon Press, Oxford, United Kingdom, 1989, pp. 51-63.
81. S. Suresh: Fatigue of Materials, Cambridge University Press, Cambridge, United Kingdom, 1991, p. 70.
82. P. Guyot and G.M. Raynaud: Acta Metall. Mater., 1991, vol. 39, pp. 217-322.
83. M. Sahoo and J.A. Lund: Metall. Trans., 1973, vol. 4, pp. 39-45.
84. J.D. Livingston: Acta Metall., 1962, vol. 10, pp. 229-39.
85. J.D. Livingston: J. Aus. Inst. Met., 1963, vol. 8, pp. 15-24.
86. J.E. Bailey: Phil. Mag., 1963, vol. 8, pp. 223-36.
87. J.A. Venables: Phil. Mag., 1962, vol. 7, pp. 1969-72.
88. H.M. Otte and J.J. Hren: Exp. Mech., 1966, vol. 6, pp. 177-93.
89. A. Mortensen, O.B. Pedersen, and H. Lilholt: Scripta Mater., 1998, vol. 38, pp. 1109-15.